Information and Technical Advice At the request of a Party, or upon its own initiative, the arbitration panel may obtain information from any source, including the Parties involved in the dispute, which it deems appropriate for the arbitration procedure. The arbitration panel also has the right to seek the opinion of experts as it deems appropriate. Any information obtained in this manner must be disclosed to each of the Parties and submitted for their comments. Interested parties are authorised to submit amicus curiae briefs to the arbitration panel in accordance with the rules of procedure.
Background and/or Criminal History Investigation Prior to commencement of any services, background and/or criminal history investigation of the Vendor’s employees and subcontractors who will be providing services to the Customer under the Contract may be performed by the Customer. Should any employee or subcontractor of the Vendor who will be providing services to the Customer under the Contract not be acceptable to the Customer as a result of the background and/or criminal history check, then Customer may immediately terminate its Purchase Order and related Service Agreement or request replacement of the employee or subcontractor in question.
Confidentiality of Contractor Information The Contractor acknowledges and agrees that this Contract and any and all Contractor information obtained by the State in connection with this Contract are subject to the State of Vermont Access to Public Records Act, 1 V.S.A. § 315 et seq. The State will not disclose information for which a reasonable claim of exemption can be made pursuant to 1 V.S.A. § 317(c), including, but not limited to, trade secrets, proprietary information or financial information, including any formulae, plan, pattern, process, tool, mechanism, compound, procedure, production data, or compilation of information which is not patented, which is known only to the Contractor, and which gives the Contractor an opportunity to obtain business advantage over competitors who do not know it or use it. The State shall immediately notify Contractor of any request made under the Access to Public Records Act, or any request or demand by any court, governmental agency or other person asserting a demand or request for Contractor information. Contractor may, in its discretion, seek an appropriate protective order, or otherwise defend any right it may have to maintain the confidentiality of such information under applicable State law within three business days of the State’s receipt of any such request. Contractor agrees that it will not make any claim against the State if the State makes available to the public any information in accordance with the Access to Public Records Act or in response to a binding order from a court or governmental body or agency compelling its production. Contractor shall indemnify the State for any costs or expenses incurred by the State, including, but not limited to, attorneys’ fees awarded in accordance with 1 V.S.A. § 320, in connection with any action brought in connection with Contractor’s attempts to prevent or unreasonably delay public disclosure of Contractor’s information if a final decision of a court of competent jurisdiction determines that the State improperly withheld such information and that the improper withholding was based on Contractor’s attempts to prevent public disclosure of Contractor’s information. The State agrees that (a) it will use the Contractor information only as may be necessary in the course of performing duties, receiving services or exercising rights under this Contract; (b) it will provide at a minimum the same care to avoid disclosure or unauthorized use of Contractor information as it provides to protect its own similar confidential and proprietary information; (c) except as required by the Access to Records Act, it will not disclose such information orally or in writing to any third party unless that third party is subject to a written confidentiality agreement that contains restrictions and safeguards at least as restrictive as those contained in this Contract; (d) it will take all reasonable precautions to protect the Contractor’s information; and (e) it will not otherwise appropriate such information to its own use or to the use of any other person or entity. Contractor may affix an appropriate legend to Contractor information that is provided under this Contract to reflect the Contractor’s determination that any such information is a trade secret, proprietary information or financial information at time of delivery or disclosure.
CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.
Provisions for Covered Entity to Inform Business Associate of Privacy Practices and Restrictions (a) Covered Entity shall notify Business Associate of any limitation(s) in the notice of privacy practices of Covered Entity under 45 CFR 164.520, to the extent that such limitation may affect Business Associate’s use or disclosure of protected health information.
CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.
Confidentiality and Safeguarding of University Records; Press Releases; Public Information Under this Agreement, Contractor may (1) create, (2) receive from or on behalf of University, or (3) have access to, records or record systems (collectively, University Records). Among other things, University Records may contain social security numbers, credit card numbers, or data protected or made confidential or sensitive by Applicable Laws. [Option (Include if University Records are subject to FERPA.): Additional mandatory confidentiality and security compliance requirements with respect to University Records subject to the Family Educational Rights and Privacy Act, 20 United States Code (USC) §1232g (FERPA) are addressed in Section 12.41.] [Option (Include if University is a HIPAA Covered Entity and University Records are subject to HIPAA.): Additional mandatory confidentiality and security compliance requirements with respect to University Records subject to the Health Insurance Portability and Accountability Act and 45 Code of Federal Regulations (CFR) Part 160 and subparts A and E of Part 164 (collectively, HIPAA) are addressed in Section 12.26.] Contractor represents, warrants, and agrees that it will: (1) hold University Records in strict confidence and will not use or disclose University Records except as (a) permitted or required by this Agreement, (b) required by Applicable Laws, or (c) otherwise authorized by University in writing; (2) safeguard University Records according to reasonable administrative, physical and technical standards (such as standards established by the National Institute of Standards and Technology and the Center for Internet Security [Option (Include if Section 12.39 related to Payment Card Industry Data Security Standards is not include in this Agreement.):, as well as the Payment Card Industry Data Security Standards]) that are no less rigorous than the standards by which Contractor protects its own confidential information; (3) continually monitor its operations and take any action necessary to assure that University Records are safeguarded and the confidentiality of University Records is maintained in accordance with all Applicable Laws and the terms of this Agreement; and (4) comply with University Rules regarding access to and use of University’s computer systems, including UTS165 at xxxx://xxx.xxxxxxxx.xxx/board-of-regents/policy-library/policies/uts165-information-resources-use-and-security-policy. At the request of University, Contractor agrees to provide University with a written summary of the procedures Contractor uses to safeguard and maintain the confidentiality of University Records.
Vendor Logo (Supplemental Vendor Information Only) No response Optional. If Vendor desires that their logo be displayed on their public TIPS profile for TIPS and TIPS Member viewing, Vendor may upload that logo at this location. These supplemental documents shall not be considered part of the TIPS Contract. Rather, they are Vendor Supplemental Information for marketing and informational purposes only. Bid Attributes Disadvantaged/Minority/Women Business & Federal HUBZone Some participating public entities are required to seek Disadvantaged/Minority/Women Business & Federal HUBZone ("D/M/WBE/Federal HUBZone") vendors. Does Vendor certify that their entity is a D/M/WBE/Federal HUBZone vendor? If you respond "Yes," you must upload current certification proof in the appropriate "Response Attachments" location. NO Historically Underutilized Business (HUB) Some participating public entities are required to seek Historically Underutilized Business (HUB) vendors as defined by the Texas Comptroller of Public Accounts Statewide HUB Program. Does Vendor certify that their entity is a HUB vendor? If you respond "Yes," you must upload current certification proof in the appropriate "Response Attachments" location. No National Coverage Can the Vendor provide its proposed goods and services to all 50 US States? Yes
Engagement of the TAM Representative Outside of Red Hat Standard Business Hours If you have purchased Premium Red Hat Software Subscriptions, you will receive 24x7 Support for Severity 1 and 2 issues through Red Hat’s 24x7 Production Support teams and not necessarily from your assigned TAM representative. Red Hat’s 24x7 Production Support team will be responsible for addressing issues, but will consult with your TAM representative, as your TAM representative is available, for advice and to gain a better understanding of your infrastructure, environment and specific needs. If you have purchased multiple TAM Service Subscriptions in each of Red Hat’s primary Support Regions, you will receive the benefit of extended TAM Service coverage hours, but you should follow the same process and contact the Red Hat 24x7 support numbers at xxxxx://xxxxxx.xxxxxx.xxx/support/contact/technicalSupport.html.
Contractor Certification regarding Business with Certain Countries and Organizations Pursuant to Subchapter F, Chapter 2252, Texas Government Code], Contractor certifies Contractor is not engaged in business with Iran, Sudan, or a foreign terrorist organization. Contractor acknowledges this Agreement may be terminated and payment withheld if this certification is inaccurate.
