Common use of Customer will Clause in Contracts

Customer will. a. Be invoiced in advance of payment due dates. b. Pay all amounts due to FP within thirty (30) days of the invoice. Payments must be made using one of FP’s acceptable payment methods, including mailing the payment to the address stated on the invoice or paying online at ▇▇▇.▇▇-▇▇▇.▇▇▇. c. Be responsible for the payment of all other fees assessed pursuant to this paragraph. A late fee will be charged if Customer does not pay the amounts due to FP within the thirty (30) days after the date of the invoice and an additional late fee will be charged for each subsequent thirty (30) day period that the amount due remains unpaid. Customer also agrees to pay FP the then-current fee charged by FP’s financial institution for checks returned unpaid and for ACH direct debit transactions which are rejected, also agrees to pay an additional fee equal to the lesser of $50 or the maximum allowed by law if a check or electronic payment is returned due to non-sufficient funds, plus any changes imposed by the USPS® as a result of non-sufficient funds. Pay FP Failure to pay on-time also may, in FP’s sole discretion, result in any of the following actions: locking of the Meter, an inability to perform resets, and FP taking steps to recover the Meter. d. Pay all sales, use, property, lease or excise taxes, along with any fees or charges imposed on the shipment, transportation, delivery, ownership, lease, rent, sale, purchase, possession, or use of any equipment (except for Federal or State income or franchise taxes imposed on FP). Customer also shall reimburse FP upon demand for any taxes paid by or advanced by FP that are the responsibility of the Customer under this paragraph. e. Use reasonable care in the handling and operation of all Meters and FP Rental Equipment and be responsible for any damage to, or the loss of, any Meters and FP Rental Equipment. Customer will procure adequate insurance covering all damage to, or the loss of, all Meters and FP Rental Equipment. Customer also will ensure that the insurance procured pursuant to this paragraph names FP as an “additional insured” and will deliver a current certificate of insurance to FP. f. Not use special attachments, printing plates, or other devices, including electronic scales or supplies, with the Meters or FP Rental Equipment, unless FP supplies those items or agrees to their use in a signed writing. g. Use postage Meters only for postage imprinting and recording purposes. Customer acknowledges that tampering with or misuse of any postage meter(s) is punishable under the federal postal laws and regulations. h. Make immediately available for examination and audit by either FP or the United States Postal Service® (“USPS®”) any Meters in their possession. i. Notify FP of any change in location of any Meter or FP Rental Equipment, and reimburse FP for any reasonable cost incurred by FP as a result of the change. Reporting any change in Meter location is required by the USPS®. j. Upon the termination of the Agreement, unless directed otherwise by FP, return the Meter and any FP Rented Equipment to FP, at Customer’s expense. Customer will follow the return instructions provided by FP and return any Meter or FP Rented Equipment to a location designated by FP, in good condition, with normal wear and tear accepted. Billing will continue until all Meters and FP Rental Equipment are received into inventory by FP. Customer also agrees to reimburse FP for any costs that FP incurs to restore a Meter or FP Rental Equipment to good condition. k. Be responsible for paying FP’s standard shipping rates and applicable fees when Meters or FP Rental Equipment is shipped, except when an exchange is made pursuant to a warranty claim. The “my account” section of FP’s website lists the current fees and ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ for the standard shipping rates. l. Make available the necessary connectivity system required for resetting the Meter. Customer agrees to make available a functioning high-speed internet connection (or Wi-Fi connection if a Wi-Fi option was selected on the equipment) at the installation site so that the connection can be connected to the Meter and used for postage resets. m. Have the proper system requirements necessary on a PC to utilize certain software and or enhanced functions as listed on the product specifications page found at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇▇▇/ for your Meter. n. Adhere to the Terms and Conditions found online at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ regarding Postage Payment Options and Postage Payment Terms & Conditions.

Customer will. a. Be invoiced in advance of payment due dates. b. Pay all amounts due to FP within thirty (30) days of the invoice. Payments must be made using one of FP’s our acceptable payment methods, including methods including: mailing the payment to the lockbox address stated on the invoice or paying online at ▇▇▇.▇▇-▇▇▇.▇▇▇. Failure to pay on-time can result in any of the following: locking of the meter device, being unable to perform resets, and FP recovery of the meter. Customer will be billed an NSF fee equal to lesser of $50 or maximum allowed by law if check or electronic payment is returned due to non-sufficient funds. b. Make all required payments net to FP, and pay all sales, use, property, or excise taxes; fees or charges imposed on the shipment, transportation, delivery, ownership, leasing, rent, sale, purchase, possession, or use of the Equipment (except Federal or State net income or franchise taxes imposed on FP). Customer shall reimburse FP upon demand for any taxes paid by or advanced by FP. c. Be responsible for Customer will be invoiced in advance of payment due dates and shall make all payments to the payment address indicated on FP invoice within thirty (30) days of all other fees assessed pursuant to this paragraphthe date of FP invoice. A late fee will be charged if Customer does the payment is not pay the amounts due to FP made within the thirty (30) days after the date of the invoice such period and an additional late fee will be charged for each subsequent thirty (30) day period days that the amount due invoice remains unpaid. Customer also agrees to pay FP the then-current fee charged by FP’s financial institution for checks returned unpaid and for ACH direct debit transactions which are rejected, also agrees to pay an additional fee equal to the lesser of $50 or the maximum allowed by law if a check or electronic payment is returned due to non-sufficient funds, plus any changes imposed by the USPS® as a result of non-sufficient funds. Pay FP Failure to pay on-time also may, in FP’s sole discretion, result in any of the following actions: locking of the Meter, an inability to perform resets, and FP taking steps to recover the Meter. d. Pay all sales, use, property, lease or excise taxes, along with any fees or charges imposed on the shipment, transportation, delivery, ownership, lease, rent, sale, purchase, possession, or use of any equipment (except for Federal or State income or franchise taxes imposed on FP). Customer also shall reimburse FP upon demand for any taxes paid by or advanced by FP that are the responsibility of the Customer under this paragraph. e. Use reasonable care in the handling and operation of all Meters and FP Rental Equipment and be responsible for any loss or damage toto Equipment, or the loss of, any Meters and including provision for proper insurance coverage. FP Rental Equipment. Customer will procure adequate insurance covering all damage to, or the loss of, all Meters and FP Rental Equipment. Customer also will ensure that the insurance procured pursuant to this paragraph names FP shall be named as an “additional insured” and will deliver a current an updated certificate of insurance must be delivered to FPFP to be kept on file at FP at all times. Use of non-FP consumables (ink, rate chips, etc.) could result in a malfunction to Equipment. The Customer is responsible for repair due to damage done by non-FP products. In the event Equipment is damaged the Customer is responsible for the lesser of repair or replacement costs. These costs are available in the “my account” section of the FP website. f. e. Not use special attachments, printing plates, or other devices, including electronic scales or supplies, with the Meters or FP Rental Equipment, provided Equipment unless FP supplies those items them or agrees to their use in a signed writing. g. f. Use postage Meters meters only for postage imprinting and recording purposes. Customer acknowledges that tampering (Tampering with or misuse of any the postage meter(s) is punishable under the federal postal laws Postal Laws and regulationsRegulations.) h. g. Make immediately available for examination and audit by either FP or the United States Postal Service® (“USPS®”) any Meters postage evidencing system or PSD in their possession. i. h. Notify FP of any change in location of any Meter or FP Rental the Equipment, and reimburse FP for any reasonable cost incurred by FP as a result of the change. Reporting any of the change in of Meter location is required by the USPS®. j. i. Upon the termination of the Agreement, unless directed otherwise by FP, return the Meter and any FP Rented rented Equipment to FPFP per the Return Instructions, at Customer’s expense. Customer will follow the return instructions provided by FP and return any Meter or FP Rented Equipment , to a location designated by FP, in good condition, with ; normal wear and tear accepted. Billing will continue until all Meters and FP Rental rented Equipment are is received into inventory by FP. Customer ▇▇▇▇▇▇▇▇ also agrees to reimburse FP for any costs that cost FP incurs to restore a Meter or FP Rental return the rented Equipment to good condition. k. Be responsible for paying FP’s standard shipping rates and applicable fees when Meters or FP Rental Equipment is shipped. In addition, except when an exchange is made pursuant to a warranty claim. The “my account” section of FP’s website lists the current fees and ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ ▇ also agrees to pay FP the then applicable return processing fee. j. Be responsible for paying for rate updating software if RateGuard coverage is not selected. k. Be responsible for the standard shipping ratesand handling fees when an exchange is done not related to a contract change or warranty claim. See the “my account” section of the FP website for the current fees. l. Make available the proper connectivity requirements necessary connectivity system required for resetting the Meterpostage meter. For models MyMail, T-1000, OptiMail, OptiMail 30, UltiMail, or CentorMail: Customer agrees to make available an analog telephone line (not digital) at installation site so that the analog telephone line can be connected to the meter and used for postage resets. For models MyMail MAX or PostBase Series: Customer agrees to make available a functioning high-speed internet High- Speed Internet connection (or Wi-Fi connection if a Wi-Fi option was selected on the equipment) at the installation site so that the high-speed internet connection can be connected to the Meter meter and used for postage resets. m. Have the proper system requirements necessary on a PC to utilize certain software and or enhanced functions as listed on the product specifications page found at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇▇▇/ for your Meter. n. Adhere to the Terms and Conditions found online at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ regarding Postage Payment Options and Postage Payment Terms & Conditions.

Customer will. a. Be invoiced in advance of payment due dates. b. Pay all amounts due to FP within thirty (30) days of the invoice. Payments must be made using one of FP’s our acceptable payment methods, including methods including: mailing the payment to the lockbox address stated on the invoice or paying online at ▇▇▇.▇▇-▇▇▇.▇▇▇. Failure to pay on-time can result in any of the following: locking of the meter device, being unable to perform resets, and FP recovery of the meter. Customer will be billed an NSF fee equal to lesser of $50 or maximum allowed by law if check or electronic payment is returned due to non-sufficient funds. b. Make all required payments net to FP, and pay all sales, use, property, or excise taxes; fees or charges imposed on the shipment, transportation, delivery, ownership, leasing, rent, sale, purchase, possession, or use of the Equipment (except Federal or State net income or franchise taxes imposed on FP). Customer shall reimburse FP upon demand for any taxes paid by or advanced by FP. c. Be responsible for Customer will be invoiced in advance of payment due dates and shall make all payments to the payment address indicated on FP invoice within thirty (30) days of all other fees assessed pursuant to this paragraphthe date of FP invoice. A late fee will be charged if Customer does the payment is not pay the amounts due to FP made within the thirty (30) days after the date of the invoice such period and an additional late fee will be charged for each subsequent thirty (30) day period days that the amount due invoice remains unpaid. Customer also agrees to pay FP the then-current fee charged by FP’s financial institution for checks returned unpaid and for ACH direct debit transactions which are rejected, also agrees to pay an additional fee equal to the lesser of $50 or the maximum allowed by law if a check or electronic payment is returned due to non-sufficient funds, plus any changes imposed by the USPS® as a result of non-sufficient funds. Pay FP Failure to pay on-time also may, in FP’s sole discretion, result in any of the following actions: locking of the Meter, an inability to perform resets, and FP taking steps to recover the Meter. d. Pay all sales, use, property, lease or excise taxes, along with any fees or charges imposed on the shipment, transportation, delivery, ownership, lease, rent, sale, purchase, possession, or use of any equipment (except for Federal or State income or franchise taxes imposed on FP). Customer also shall reimburse FP upon demand for any taxes paid by or advanced by FP that are the responsibility of the Customer under this paragraph. e. Use reasonable care in the handling and operation of all Meters and FP Rental Equipment and be responsible for any loss or damage toto Equipment, or the loss of, any Meters and including provision for proper insurance coverage. FP Rental Equipment. Customer will procure adequate insurance covering all damage to, or the loss of, all Meters and FP Rental Equipment. Customer also will ensure that the insurance procured pursuant to this paragraph names FP shall be named as an “additional insured” and will deliver a current an updated certificate of insurance must be delivered to FPFP to be kept on file at FP at all times. Use of non-FP consumables (ink, rate chips, etc.) could result in a malfunction to Equipment. The Customer is responsible for repair due to damage done by non-FP products. In the event Equipment is damaged the Customer is responsible for the lesser of repair or replacement costs. These costs are available in the “my account” section of the FP website. f. e. Not use special attachments, printing plates, or other devices, including electronic scales or supplies, with the Meters or FP Rental Equipment, provided Equipment unless FP supplies those items them or agrees to their use in a signed writing. g. f. Use postage Meters meters only for postage imprinting and recording purposes. Customer acknowledges that tampering (Tampering with or misuse of any the postage meter(s) is punishable under the federal postal laws Postal Laws and regulationsRegulations.) h. g. Make immediately available for examination and audit by either FP or the United States Postal Service® (“USPS®”) any Meters postage evidencing system or PSD in their possession. i. h. Notify FP of any change in location of any Meter or FP Rental the Equipment, and reimburse FP for any reasonable cost incurred by FP as a result of the change. Reporting any of the change in of Meter location is required by the USPS®. j. i. Upon the termination of the Agreement, unless directed otherwise by FP, return the Meter and any FP Rented rented Equipment to FPFP per the Return Instructions, at Customer’s expense. Customer will follow the return instructions provided by FP and return any Meter or FP Rented Equipment , to a location designated by FP, in good condition, with ; normal wear and tear accepted. Billing will continue until all Meters and FP Rental rented Equipment are is received into inventory by FP. Customer also agrees to reimburse FP for any costs that cost FP incurs to restore a Meter or FP Rental return the rented Equipment to good condition. In addition, Customer also agrees to pay FP the then applicable return processing fee. j. Be responsible for paying for rate updating software if RateGuard coverage is not selected. k. Be responsible for paying FP’s standard the shipping rates and applicable handling fees when Meters or FP Rental Equipment is shipped, except when an exchange is made pursuant done not related to a contract change or warranty claim. The See the “my account” section of FP’s the FP website lists for the current fees and ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ for the standard shipping ratesfees. l. Make available the proper connectivity requirements necessary connectivity system required for resetting the Meterpostage meter. For models MyMail, T-1000, OptiMail, OptiMail 30, UltiMail, or CentorMail: Customer agrees to make available an analog telephone line (not digital) at installation site so that the analog telephone line can be connected to the meter and used for postage resets. For models MyMail MAX or PostBase Series: Customer agrees to make available a functioning high-speed internet High- Speed Internet connection (or Wi-Fi connection if a Wi-Fi option was selected on the equipment) at the installation site so that the high-speed internet connection can be connected to the Meter meter and used for postage resets. m. Have the proper system requirements necessary on a PC to utilize certain software and or enhanced functions as listed on the product specifications page found at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇▇▇/ for your Meter. n. Adhere to the Terms and Conditions found online at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ regarding Postage Payment Options and Postage Payment Terms & Conditions.

Customer will. a. Be invoiced in advance of payment due dates. b. Pay all amounts due to FP within thirty (30) days of the invoice. Payments must be made using one of FP’s acceptable payment methods, including mailing the payment to the address stated on the invoice or paying online at ▇▇▇.▇▇-▇▇▇.▇▇▇. c. Be responsible for the payment of all other fees assessed pursuant to this paragraph. A late fee will be charged if Customer does not pay the amounts due to FP within the thirty (30) days after the date of the invoice and an additional late fee will be charged for each subsequent thirty (30) day period that the amount due remains unpaid. Customer also agrees to pay FP the then-current fee charged by FP’s financial institution for checks returned unpaid and for ACH direct debit transactions which are rejected, also agrees to pay an additional fee equal to the lesser of $50 or the maximum allowed by law if a check or electronic payment is returned due to non-sufficient funds, plus any changes imposed by the USPS® as a result of non-sufficient funds. Pay FP Failure to pay on-time also may, in FP’s sole discretion, result in any of the following actions: locking of the Meter, an inability to perform resets, and FP taking steps to recover the Meter. d. Pay all sales, use, property, lease or excise taxes, along with any fees or charges imposed on the shipment, transportation, delivery, ownership, lease, rent, sale, purchase, possession, or use of any equipment (except for Federal or State income or franchise taxes imposed on FP). Customer also shall reimburse FP upon demand for any taxes paid by or advanced by FP that are the responsibility of the Customer under this paragraph. e. Use reasonable care in the handling and operation of all Meters and FP Rental Equipment and be responsible for any damage to, or the loss of, any Meters and FP Rental Equipment. Customer will procure adequate insurance covering all damage to, or the loss of, all Meters and FP Rental Equipment. Customer also will ensure that the insurance procured pursuant to this paragraph names FP as an “additional insured” and will deliver a current certificate of insurance to FP. f. Not use special attachments, printing plates, or other devices, including electronic scales or supplies, with the Meters or FP Rental Equipment, unless FP supplies those items or agrees to their use in a signed writing. g. Use postage Meters only for postage imprinting and recording purposes. Customer acknowledges that tampering with or misuse of any postage meter(s) is punishable under the federal postal laws and regulations. h. Make immediately available for examination and audit by either FP or the United States Postal Service® (“USPS®”) any Meters in their possession. i. Notify FP of any change in location of any Meter or FP Rental Equipment, and reimburse FP for any reasonable cost incurred by FP as a result of the change. Reporting any change in Meter location is required by the USPS®. j. Upon the termination of the Agreement, unless directed otherwise by FP, return the Meter and any FP Rented Equipment to FP, at Customer’s expense. Customer will follow the return instructions provided by FP and return any Meter or FP Rented Equipment to a location designated by FP, in good condition, with normal wear and tear accepted. Billing will continue until all Meters and FP Rental Equipment are received into inventory by FP. Customer also agrees to reimburse FP for any costs that FP incurs to restore a Meter or FP Rental Equipment to good condition. In addition, Customer also agrees to pay to FP the return processing fee imposed by FP as found in the “my account” section of FP’s website. k. Be responsible for paying for rate updating software if RateGuard coverage is not purchased by Customer. l. Be responsible for paying FP’s standard shipping rates and applicable fees when Meters or FP Rental Equipment is shipped, except when an exchange is made pursuant to a warranty claim. The “my account” section of FP’s website lists the current fees and ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ for the standard shipping rates. l. m. Make available the necessary connectivity system required for resetting the Meter. For models MyMail, OptiMail 30, UltiMail, or CentorMail, Customer agrees to make available a functioning analog telephone line (not digital) at the installation site so that the analog telephone line can be connected to the Meter and used for postage resets. For Meters utilizing the MailCredit software or PostBase Series, Customer agrees to make available a functioning high-speed internet connection (or Wi-Fi connection if a Wi-Fi option was selected on the equipment) at the installation site so that the connection can be connected to the Meter and used for postage resets. m. n. Have the proper system requirements necessary on a PC to utilize certain software and or enhanced functions as listed on the product specifications page found at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇▇▇/ for your Meter. n. o. Adhere to the Terms and Conditions found online at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ regarding Postage Payment Options and Postage Payment Terms & Conditions.

Customer will. a. Be invoiced in advance of payment due dates. b. Pay all amounts due to FP within thirty (30) days of the invoice. Payments must be made using one of FP’s 's acceptable payment methods, including mailing the payment to the address stated on the invoice or paying online at ▇▇▇.▇▇-▇▇▇.▇▇▇. c. Be responsible for the payment of all other fees assessed pursuant to this paragraph. A late fee will be charged if Customer does not pay the amounts due to FP within the thirty (30) days after the date of the invoice and an additional late fee will be charged for each subsequent thirty (30) day period that the amount due remains unpaid. Customer also agrees to pay FP the then-current fee charged by FP’s 's financial institution for checks returned unpaid and for ACH direct debit transactions which are rejected, also agrees to pay an additional fee equal to the lesser of $50 S50 or the maximum allowed by law if a check or electronic payment is returned due to non-sufficient funds, plus any changes imposed by the USPS® as USPS@as a result of non-sufficient funds. Pay FP Failure to pay on-time also may, . in FP’s sole discretion, result in any of the following actions: locking of the Meter, an inability to perform resets, and FP taking steps to recover the Meter.'s d. Pay all sales, use, property, lease or excise taxes, along with any fees or charges imposed on the shipment, transportation, delivery, ownership, lease, rent, sale, purchase, possession, or use of any equipment (except for Federal or State income or franchise taxes imposed on FP). Customer also shall reimburse FP upon demand for any taxes paid by or advanced by FP that are the responsibility of the Customer under this paragraph. e. Use reasonable care in the handling and operation of all Meters and FP Rental Equipment and be responsible for any damage to, or the loss of, any Meters and FP Rental Equipment. Customer will procure adequate insurance covering all damage to, or the loss of, all Meters and FP Rental Equipment. Customer also will ensure that the insurance procured pursuant to this paragraph names FP as an “"additional insured” " and will deliver a current certificate of insurance to FP. f. Not use special attachments, printing plates, or other devices, including electronic scales or supplies, with the Meters or FP Rental Equipment, unless FP supplies those items or agrees to their use in a signed writing. g. Use postage Meters only for postage imprinting and recording purposes. Customer acknowledges that tampering with or misuse of any postage meter(s) is punishable under the federal postal laws and regulations. h. Make immediately available for examination and audit by either FP or the United States Postal Service® Service@ (“USPS®”"USPS@") any Meters in their possession. i. Notify FP of any change in location of any Meter or FP Rental Equipment, and reimburse FP for any reasonable cost incurred by FP as a result of the change. Reporting any change in Meter location is required by the USPS®.USPS@. j. Upon the termination of the Agreement, unless directed otherwise by FP, return the Meter and any FP Rented Equipment to FP, at Customer’s 's expense. Customer will follow the return instructions provided by FP and return any Meter or FP Rented Equipment to a location designated by FP, in good condition, with normal wear and tear accepted. Billing will continue until all Meters and FP Rental Equipment are received into inventory by FP. Customer also agrees to reimburse FP for any costs that FP incurs to restore a Meter or FP Rental Equipment to good condition. In addition, Customer also agrees to pay to FP the retum processing fee imposed by FP as found in the "my account" section of FP's website. k. Be responsible for paying for rate updating software if RateGuard coverage is not purchased by Customer. I. Be responsible for paying FP’s 's standard shipping rates and applicable fees when Meters or FP Rental Equipment is shipped, except when an exchange is made pursuant to a warranty claim. The “"my account” " section of FP’s 's website lists the current fees and ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ for the standard shipping rates. l. m. Make available the necessary connectivity system required for resetting the Meter. For models MyMail, OptiMaii 30, UltiMail, or CentorMail, Customer agrees to make available a functioning analog telephone line (not digital) at the installation site so that the analog telephone line can be connected to the Meter and used for postage resets. For Meters utilizing the MailCredit software or PostBase Series, Customer agrees to make available a functioning high-speed internet connection (or Wi-Fi connection if a Wi-Fi option was selected on the equipment) at the installation site so that the connection can be connected to the Meter and used for postage resets. m. n. Have the proper system requirements necessary on a PC to utilize certain software and or enhanced functions as listed on the product specifications page found at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇▇▇/ ▇ for your Meter. n. o. Adhere to the Terms and Conditions found online at ▇▇▇.▇▇-▇▇▇.▇▇▇/▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇/ regarding Postage Payment Options and Postage Payment Terms & Conditions.