Common use of Customers of Size Requiring Additional Space on Board the Aircraft Clause in Contracts

Customers of Size Requiring Additional Space on Board the Aircraft. To ensure that all Customers have access to safe and comfortable seating on board, we are providing the below guidance. For most seats in our aircraft, each seat is positioned between a window and aisle, with no adjacent seat. Additionally, where there may be an adjacent seat, the design of the seat belt system for our aircraft does not permit Customers to sit on or between two seats and/or use seat belts adjacent to different seats to secure themselves during flight. For this reason, each Customer must be able to sit in one seat and use the seat belt intended for the seat in which they are seated. The entrance door for each aircraft, width of each seat, and seat belt capacity may be used as a guide when determining whether someone may be safely accommodated on board our aircraft: For the Cessna 402, the aircraft door width for entry is 22 inches, the seat width is 17 inches, and seat belts are typically 40 inches in length across the lap, although lengths can vary. Seat belt extenders, typically extending the length of a seat belt up to 24 inches, are available for Customers who may need to lengthen the size of the belt. For the Tecnam Traveller, the aircraft door width for entry is 31.5 inches, the seat width is 16 inches and the seat belt maximum extension in length across the lap is approximately 43 inches; however, the integrated harness system allows some flexibility depending on the length needed across the lap versus the length needed for the shoulder harness to cross the body. FAA-approved seat belt extenders are not available for this harness model and not recommended by the manufacturer. For the Britten Xxxxxx Islander, the seating is “bench” style, the available space for each Passenger being ½ of the bench seat which is approximately 18 inches. The aircraft door width for entry is 36 inches wide for all doors except one which is 24 inches and seat belts are typically 40 inches in length across the lap; however, the integrated harness system allows some flexibility depending on the length needed across the lap versus the length needed for the shoulder harness to cross the body. Seat belt extenders are similarly not available due to the non-detachable shoulder-harness design. Customers of size may contact our Contact Center in advance to let us know they may need additional time or assistance to board, or they may discuss their needs with our Airport Customer Service Agents. Customers of size must be able to be transported without compromising the safety of themselves or other Passengers on board the aircraft; however, Cape Air will not refuse to provide transportation to any Customer solely because a Customer’s size results in an inconvenience to crewmembers or other Passengers.

Customers of Size Requiring Additional Space on Board the Aircraft. To ensure that all Customers have access to safe and comfortable seating on board, we are providing the below guidance. For most seats in our aircraft, each seat is positioned between a window and aisle, with no adjacent seat. Additionally, where there may be an adjacent seat, the design of the seat belt system for our aircraft does not permit Customers to sit on or between two seats and/or use seat belts adjacent to different seats to secure themselves during flight. For this reason, each Customer must be able to sit in one seat and use the seat belt intended for the seat in which they are he or she is seated. The entrance door for each aircraft, width of each seat, and seat belt capacity may be used as a guide when determining whether someone may be safely accommodated on board our aircraft: For the Cessna 402, the aircraft door width for entry is 22 inches, the seat width is 17 inches, and seat belts are typically 40 inches in length across the lap, although lengths can vary. Seat belt extenders, typically generally extending the length of a seat belt up to 24 inches, are available for Customers who may need to lengthen the size of the belt. For the Tecnam Traveller, the aircraft door width for entry is 31.5 inches, the seat width is 16 inches and the seat belt maximum extension in length across the lap is approximately 43 inches; however, the integrated harness system allows some flexibility depending on up the length needed across the lap versus the length needed for the shoulder harness to cross the body. FAA-approved seat belt extenders are not available for this harness model and not recommended by the manufacturer. For the Britten Xxxxxxx Xxxxxx Islander, the seating is “bench” style, the available space for each Passenger being ½ of the bench seat which is approximately 18 inches. The aircraft door width for entry is 36 inches wide for all doors except one which is 24 inches and seat belts are typically 40 inches in length across the lap; however, the integrated harness system allows some flexibility depending on up the length needed across the lap versus the length needed for the shoulder harness to cross the body. Seat belt extenders are similarly not available due to the non-detachable shoulder-harness design. For the Cessna Caravan Amphibian, the door sizes, seat sizes, seat configurations, and seat belt lengths differ with each aircraft. Customers of size may contact our Contact Center in advance to let us know they may need additional time or assistance to board, or they may discuss their needs with our Airport Customer Service Agents. Customers of size must be able to be transported without compromising the safety of themselves or other Passengers on board the aircraft; however, however Cape Air will not refuse to provide transportation to any Customer solely because a Customer’s size results in an inconvenience to crewmembers or other Passengers.

Customers of Size Requiring Additional Space on Board the Aircraft. To ensure that all Customers have access to safe and comfortable seating on board, we are providing the below guidance. For most seats in our aircraft, each seat is positioned between a window and aisle, with no adjacent seat. Additionally, where there may be an adjacent seat, the design of the seat belt system for our aircraft does not permit Customers to sit on or between two seats and/or use seat belts adjacent to different seats to secure themselves during flight. For this reason, each Customer must be able to sit in one seat and use the seat belt intended for the seat in which they are he or she is seated. The entrance door for each aircraft, width of each seat, and seat belt capacity may be used as a guide when determining whether someone may be safely accommodated on board our aircraft: For the Cessna 402, the aircraft door width for entry is 22 inches, the seat width is 17 inches, and seat belts are typically 40 inches in length across the lap, although lengths can vary. Seat belt extenders, typically generally extending the length of a seat belt up to 24 inches, are available for Customers who may need to lengthen the size of the belt. For the Tecnam Traveller, the aircraft door width for entry is 31.5 inches, the seat width is 16 inches and the seat belt maximum extension in length across the lap is approximately 43 inches; however, the integrated harness system allows some flexibility depending on up the length needed across the lap versus the length needed for the shoulder harness to cross the body. FAA-approved seat belt extenders are not available for this harness model and not recommended by the manufacturer. For the Britten Xxxxxxx Xxxxxx Islander, the seating is “bench” style, the available space for each Passenger being ½ of the bench seat which is approximately 18 inches. The aircraft door width for entry is 36 inches wide for all doors except one which is 24 inches and seat belts are typically 40 inches in length across the lap; however, the integrated harness system allows some flexibility depending on up the length needed across the lap versus the length needed for the shoulder harness to cross the body. Seat belt extenders are similarly not available due to the non-detachable shoulder-harness design. Customers of size may contact our Contact Center in advance to let us know they may need additional time or assistance to board, or they may discuss their needs with our Airport Customer Service Agents. Customers of size must be able to be transported without compromising the safety of themselves or other Passengers on board the aircraft; however, however Cape Air will not refuse to provide transportation to any Customer solely because a Customer’s size results in an inconvenience to crewmembers or other Passengers.

Customers of Size Requiring Additional Space on Board the Aircraft. To ensure that all Customers have access to safe and comfortable seating on board, we are providing the below guidance. For most seats in our aircraft, each seat is positioned between a window and aisle, with no adjacent seat. Additionally, where there may be an adjacent seat, the design of the seat belt system for our aircraft does not permit Customers to sit on or between two seats and/or use seat belts adjacent to different seats to secure themselves during flight. For this reason, each Customer must be able to sit in one seat and use the seat belt intended for the seat in which they are he or she is seated. The entrance door for each aircraft, width of each seat, and seat belt capacity may be used as a guide when determining whether someone may be safely accommodated on board our aircraft: For the Cessna 402, the aircraft door width for entry is 22 inches, the seat width is 17 inches, and seat belts are typically 40 inches in length across the lap, although lengths can vary. Seat belt extenders, typically generally extending the length of a seat belt up to 24 inches, are available for Customers who may need to lengthen the size of the belt. For the Tecnam Traveller, the aircraft door width for entry is 31.5 inches, the seat width is 16 inches and the seat belt maximum extension in length across the lap is approximately 43 inches; however, the integrated harness system allows some flexibility depending on up the length needed across the lap versus the length needed for the shoulder harness to cross the body. FAA-approved seat belt extenders are not available for this harness model and not recommended by the manufacturer. For the Britten Xxxxxx Islander, the seating is “bench” style, the available space for each Passenger being ½ of the bench seat which is approximately 18 inches. The aircraft door width for entry is 36 inches wide for all doors except one which is 24 inches and seat belts are typically 40 inches in length across the lap; however, the integrated harness system allows some flexibility depending on up the length needed across the lap versus the length needed for the shoulder harness to cross the body. Seat belt extenders are similarly not available due to the non-detachable shoulder-harness design. Customers of size may contact our Contact Center in advance to let us know they may need additional time or assistance to board, or they may discuss their needs with our Airport Customer Service Agents. Customers of size must be able to be transported without compromising the safety of themselves or other Passengers on board the aircraft; however, however Cape Air will not refuse to provide transportation to any Customer solely because a Customer’s size results in an inconvenience to crewmembers or other Passengers.