Assumed Business Names Borrower has filed or recorded all documents or filings required by law relating to all assumed business names used by Borrower. Excluding the name of Borrower, the following is a complete list of all assumed business names under which Borrower does business: None.
DISADVANTAGED BUSINESS ENTERPRISE OR HISTORICALLY UNDERUTILIZED BUSINESS REQUIREMENTS The Engineer agrees to comply with the requirements set forth in Attachment H, Disadvantaged Business Enterprise or Historically Underutilized Business Subcontracting Plan Requirements with an assigned goal or a zero goal, as determined by the State.
BUSINESS PROFITS 1. The profits of an enterprise of a Contracting State shall be taxable only in that State unless the enterprise carries on business in the other Contracting State through a permanent establishment situated therein. If the enterprise carries on business as aforesaid, the profits of the enterprise may be taxed in the other State, but only so much of them as is attributable to that permanent establishment.
2. Subject to the provisions of paragraph 3, where an enterprise of a Contracting State carries on business in the other Contracting State through a permanent establishment situated therein, there shall in each Contracting State be attributed to that permanent establishment the profits which it might be expected to make if it were a distinct and separate enterprise engaged in the same or similar activities under the same or similar conditions and dealing wholly independently with the enterprise of which it is a permanent establishment.
3. In determining the profits of a permanent establishment, there shall be allowed as deductions expenses which are incurred for the purposes of the permanent establishment, including executive and general administrative expenses so incurred, whether in the State in which the permanent establishment is situated or elsewhere.
4. Insofar as it has been customary in a Contracting State to determine the profits to be attributed to a permanent establishment on the basis of an apportionment of the total profits of the enterprise to its various parts, nothing in paragraph 2 shall preclude that Contracting State from determining the profits to be taxed by such an apportionment as may be customary; the method of apportionment adopted shall, however, be such that the result shall be in accordance with the principles contained in this Article.
5. No profits shall be attributed to a permanent establishment by reason of the mere purchase by that permanent establishment of goods or merchandise for the enterprise.
6. For the purposes of the preceding paragraphs, the profits to be attributed to the permanent establishment shall be determined by the same method year by year unless there is good and sufficient reason to the contrary.
7. Where profits include items of income which are dealt with separately in other Articles of this Agreement, then the provisions of those Articles shall not be affected by the provisions of this Article.
CAPITAL CHANGES AND BUSINESS SUCCESSIONS The Plan contains provisions covering the treatment of options in a number of contingencies such as stock splits and mergers. Provisions in the Plan for adjustment with respect to stock subject to options and the related provisions with respect to successors to the business of the Company are hereby made applicable hereunder and are incorporated herein by reference.
Trunk Group Connections and Ordering 5.2.1 For both One-Way and Two-Way Interconnection Trunks, if Onvoy wishes to use a technically feasible interface other than a DS1 or a DS3 facility at the POI, the Parties shall negotiate reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures.
5.2.2 When One-Way or Two-Way Interconnection Trunks are provisioned using a DS3 interface facility, if Onvoy orders the multiplexed DS3 facilities to a Frontier Central Office that is not designated in the NECA 4 Tariff as the appropriate Intermediate Hub location (i.e., the Intermediate Hub location in the appropriate Tandem subtending area based on the LERG), and the provision of such facilities to the subject Central Office is technically feasible, the Parties shall negotiate in good faith reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures.
5.2.3 Each Party will identify its Carrier Identification Code, a three or four digit numeric code obtained from Telcordia, to the other Party when ordering a trunk group.
5.2.4 For multi-frequency (MF) signaling each Party will out pulse ten (10) digits to the other Party, unless the Parties mutually agree otherwise.
5.2.5 Each Party will use commercially reasonable efforts to monitor trunk groups under its control and to augment those groups using generally accepted trunk- engineering standards so as to not exceed blocking objectives. Each Party agrees to use modular trunk-engineering techniques for trunks subject to this Attachment.
The Business The parties acknowledge that the Company is engaged in the development, marketing and sale of certain proprietary technologies, processes and related products in the areas of chemical detection, technical processes, and technical/business services, and that the Company may also from time to time become or may intend to become engaged in other business endeavors (individually and collectively, the "BUSINESS"). The Company shall be deemed to intend to become engaged in a business endeavor if it has devoted or expended any significant resources, either financial or human resources, towards the proposed endeavor, either in planning or implementing the undertaking of such planned endeavor.
Restricted Business For all purposes under this Agreement, “Restricted Business” shall mean the design, development, marketing or sales of software, or any other process, system, product, or service marketed, sold or under development by the Company at the time Executive’s Employment with the Company ends.
Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Freedom has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Freedom. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Freedom (e.g. hairpinning):
1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises.
2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated.
3. If capacity exists, provide "side-door" porting through the switch.
4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch).
2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases.
2.6.3 If no alternate facility is available, and upon request from Freedom, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Freedom will then have the option of paying the one-time SC rates to place the Loop.
TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES The goal of this task is to develop a plan to make the knowledge gained, experimental results, and lessons learned available to the public and key decision makers. • Prepare an Initial Fact Sheet at start of the project that describes the project. Use the format provided by the CAM. • Prepare a Final Project Fact Sheet at the project’s conclusion that discusses results. Use the format provided by the CAM. • Prepare a Technology/Knowledge Transfer Plan that includes: o An explanation of how the knowledge gained from the project will be made available to the public, including the targeted market sector and potential outreach to end users, utilities, regulatory agencies, and others.
o A description of the intended use(s) for and users of the project results. o Published documents, including date, title, and periodical name. o Copies of documents, fact sheets, journal articles, press releases, and other documents prepared for public dissemination. These documents must include the Legal Notice required in the terms and conditions. Indicate where and when the documents were disseminated. o A discussion of policy development. State if project has been or will be cited in government policy publications, or used to inform regulatory bodies. o The number of website downloads or public requests for project results. o Additional areas as determined by the CAM. • Conduct technology transfer activities in accordance with the Technology/Knowledge Transfer Plan. These activities will be reported in the Progress Reports. • When directed by the CAM, develop Presentation Materials for an Energy Commission- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California Energy Commission. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Prepare a Technology/Knowledge Transfer Report on technology transfer activities conducted during the project. • Initial Fact Sheet (draft and final) • Final Project Fact Sheet (draft and final) • Presentation Materials (draft and final) • High Quality Digital Photographs • Technology/Knowledge Transfer Plan (draft and final) • Technology/Knowledge Transfer Report (draft and final)
Operation of the Business During the period from the date of this Agreement to the Closing Date, the Stockholders shall cause the Company to conduct its operations and the Business in the Ordinary Course of Business and in material compliance with all laws applicable to the Company or any of its properties or assets and, to the extent consistent therewith, use its Reasonable Best Efforts to preserve intact its current business organization, keep its physical assets in good working condition, keep available the services of its current officers and employees and preserve its relationships with customers, suppliers and others having business dealings with it to the end that its goodwill and ongoing business shall not be impaired in any material respect. Without limiting the generality of the foregoing, prior to the Closing Date, the Company and the Stockholders shall not and shall cause the Company not to, in each case, without the prior written consent of the Buyer (which consent shall not be unreasonably withheld, conditioned or delayed) and except as otherwise contemplated by this Agreement, incur any funded indebtedness:
(a) issue or sell, or redeem or repurchase, any stock or other securities of the Company or any warrants, options or other rights to acquire any such stock or other securities (except pursuant to the conversion or exercise of outstanding convertible securities, options or warrants outstanding on the date hereof), or amend any of the terms of (including without limitation the vesting of) any such convertible securities or options or warrants;
(b) except as otherwise contemplated under Section 4.4(h), below, split, combine or reclassify any shares of its capital stock; or, except as may be required to enable Stockholders to pay taxes on the Pre-Tax Profits of the Company through the Closing Date, and except as otherwise contemplated under Section 4.4(h), below, declare, set aside or pay any dividend or other distribution (whether in cash, stock or property or any combination thereof) in respect of its capital stock;
(c) except in connection with the Required Financing (hereinafter described), create, incur, assume or guaranty any indebtedness for borrowed money (including obligations in respect of capital leases) except in the Ordinary Course of Business or in connection with the transactions contemplated by this Agreement; assume, guarantee, endorse or otherwise become liable or responsible (whether directly, contingently or otherwise) for the obligations of any other person or entity; or make any loans, advances or capital contributions to, or investments in, any other person or entity;
(d) enter into, adopt or amend any Employee Benefit Plan or any employment or severance agreement or arrangement or (except for normal increases in the Ordinary Course of Business for employees who are not Affiliates) increase in any manner the compensation or fringe benefits of, or materially modify the employment terms of, its directors, officers or employees, generally or individually, or pay any bonus or other benefit to its directors, officers or employees;
(e) acquire, sell, lease, license or dispose of any assets or property (including without limitation any shares or other equity interests in or securities of the Company or any corporation, partnership, association or other business organization or division thereof), other than purchases and sales of Inventories and other assets in the Ordinary Course of Business;
(f) except in connection with the Required Financing (hereinafter described), mortgage or pledge any of its property or assets (including without limitation any shares or other equity interests in or securities of the Company or any corporation, partnership, association or other business organization or division thereof), or subject any such property or assets to any Security Interest;
(g) discharge or satisfy any Security Interest or pay any obligation or liability other than in the Ordinary Course of Business;
(h) as at the Closing Date, and after giving effect to the declaration or funding of any dividends or distributions to the Stockholders, whether in cash or in property, (A) the combined stockholders’ equity of both the Company and DiscCo shall be not less than $4,000,000, (B) neither the Company nor DiscCo will have an indebtedness in excess of $100,000, and (C) not less than $500,000 of the combined assets of both the Company and DiscCo will be in the form of cash, cash equivalents or immediately marketable securities which is necessary to cover operating expenses of the Company and DiscCo incurred in the ordinary course of business;
(i) amend the charter, by-laws or other organizational documents of the Company;
(j) change in any material respect its accounting methods, principles or practices, except insofar as may be required by a generally applicable change in GAAP;
(k) enter into, amend, terminate, take or omit to take any action that would constitute a violation of or default under, or waive any rights under, any material Contract or agreement;
(l) institute or settle any Legal Proceeding;
(m) take any action or fail to take any action permitted by this Agreement with the knowledge that such action or failure to take action would result in (i) any of the representations and warranties of the Company set forth in this Agreement becoming untrue in any material respect or (ii) any of the conditions to the Closing set forth in Article V not being satisfied; or
(n) agree in writing or otherwise to take any of the foregoing actions.
