Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways: 6.2.1.1 As capacity on a shared UNE facility. 6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro Teleconnect. 6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators. 6.2.3 Metro Teleconnect may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any. 6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date. 6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro Teleconnect, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectDeland Actel.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Deland Actel may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Deland Actel may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectDeland Actel, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectICG.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect ICG may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect ICG may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectICG, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectStarlink.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Starlink may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Starlink may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectStarlink, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro Teleconnect.USA Telecom, Inc..
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect USA Telecom, Inc. may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect USA Telecom, Inc. may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectUSA Telecom, Inc., BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectNex-Phon.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Nex-Phon may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Nex-Phon may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectNex-Phon, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectCCI.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect CCI may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect CCI may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectCCI, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectBAK.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect BAK may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect BAK may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectBAK, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectMTS Communications.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect MTS Communications may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect MTS Communications may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectMTS Communications, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectOnePoint Communications.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect OnePoint Communications may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect OnePoint Communications may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectOnePoint Communications, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectAmTel.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect AmTel may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect AmTel may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectAmTel, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectWorldxChange.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect WorldxChange may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect WorldxChange may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectWorldxChange, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Clec Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectFPB.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect FPB may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect FPB may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectFPB, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectVertex.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Vertex may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Vertex may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectVertex, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro DPI Teleconnect.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro DPI Teleconnect may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro DPI Teleconnect may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro DPI Teleconnect, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectNTBS.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect NTBS may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect NTBS may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectNTBS, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectConnectNow!.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect ConnectNow! may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect ConnectNow! may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectConnectNow!, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectColumbus Local.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Columbus Local may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Columbus Local may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectColumbus Local, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectPilgrim Telephone.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Pilgrim Telephone may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Pilgrim Telephone may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectPilgrim Telephone, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectComm South.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Comm South may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Comm South may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectComm South, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectUnity Acquisition.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Unity Acquisition may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Unity Acquisition may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectUnity Acquisition, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectMyLineToo.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect MyLineToo may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect MyLineToo may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectMyLineToo, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectSouthern Telecom.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Southern Telecom may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Southern Telecom may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectSouthern Telecom, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Adoption Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectHotline.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Hotline may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Hotline may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectHotline, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Clec Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectVictory.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Victory may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Victory may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectVictory, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectNOW.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect NOW may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect NOW may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectNOW, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectAmeriMex.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect AmeriMex may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect AmeriMex may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectAmeriMex, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectAirCover.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect AirCover may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect AirCover may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectAirCover, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectTWTC.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect TWTC may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect TWTC may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectTWTC, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectClearwave Communications.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Clearwave Communications may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Clearwave Communications may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectClearwave Communications, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro Teleconnecte-Tel.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect e-Tel may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect e-Tel may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro Teleconnecte-Tel, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectSPARDI.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect SPARDI may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect SPARDI may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectSPARDI, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectCovista.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Covista may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Covista may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectCovista, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Clec Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectLightning Communications.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Lightning Communications may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Lightning Communications may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectLightning Communications, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectRuddata.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Ruddata may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Ruddata may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectRuddata, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro Teleconnect.C.M..
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect C.M. may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect C.M. may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectC.M., BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectNexus.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Nexus may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Nexus may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectNexus, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectACI.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect ACI may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect ACI may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectACI, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectAdvantage Group.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Advantage Group may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Advantage Group may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectAdvantage Group, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectCBX One-Stop.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect CBX One-Stop may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect CBX One-Stop may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectCBX One-Stop, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectRent-A-Line.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Rent-A-Line may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Rent-A-Line may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectRent-A-Line, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectFeroNetworks.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect FeroNetworks may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect FeroNetworks may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectFeroNetworks, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectPLI.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect PLI may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect PLI may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectPLI, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectSail Networks.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Sail Networks may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Sail Networks may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectSail Networks, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectSouthern Light.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Southern Light may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Southern Light may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectSouthern Light, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectEZ Phone.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect EZ Phone may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect EZ Phone may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectEZ Phone, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectONS.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect ONS may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect ONS may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectONS, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectXxxx.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Xxxx may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Xxxx may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectXxxx, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectACN.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect ACN may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect ACN may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectACN, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Clec Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectABC Telcom.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect ABC Telcom may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect ABC Telcom may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectABC Telcom, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectSeven Bridges.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Seven Bridges may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Seven Bridges may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectSeven Bridges, BellSouth shall perform the routine network modifications.. AMENDMENT EXHIBIT 1
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectSymtelco.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Symtelco may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Symtelco may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectSymtelco, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectCOMTECH21.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect COMTECH21 may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect COMTECH21 may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectCOMTECH21, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Clec Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectUS LEC.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect US LEC may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCCpursuant to 47 C.F.R. Part 51, Metro Teleconnect US LEC may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled modifications as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro Teleconnect, BellSouth shall perform the routine network modificationsset forth in Section 1.7.4.
Appears in 1 contract
Samples: Clec Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectFLATEL.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect FLATEL may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect FLATEL may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectFLATEL, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectNationsLink.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect NationsLink may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect NationsLink may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectNationsLink, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectTel West.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Tel West may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Tel West may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectTel West, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectGrande.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Grande may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Grande may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectGrande, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectTriarch Marketing.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Triarch Marketing may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Triarch Marketing may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectTriarch Marketing, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectUtility USA.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Utility USA may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Utility USA may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectUtility USA, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectBSE.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect BSE may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect BSE may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectBSE, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectFreedom.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Freedom may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Freedom may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectFreedom, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Bellsouth® / Clec Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectEPICUS.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect EPICUS may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect EPICUS may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectEPICUS, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectTeleConex.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect TeleConex may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect TeleConex may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectTeleConex, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Clec Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectVelocity.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Velocity may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Velocity may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectVelocity, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectGateway.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Gateway may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Gateway may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectGateway, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectMicro-Comm.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Micro-Comm may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Micro-Comm may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectMicro-Comm, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
Dedicated Transport. 6.2.1 BellSouth shall offer Dedicated Transport in each of the following ways:
6.2.1.1 As capacity on a shared UNE facility.
6.2.1.2 As a circuit (e.g., DS0, DS1, DS3) dedicated to Metro TeleconnectBudget Phone.
6.2.2 Dedicated Transport may be provided over facilities such as optical fiber, copper twisted pair, and coaxial cable, and shall include transmission equipment such as line terminating equipment, amplifiers, and regenerators.
6.2.3 Metro Teleconnect Budget Phone may obtain a maximum of twelve (12) unbundled dedicated DS3 circuits, or their equivalent, for any single route at the UNE rates set forth in Exhibit A for which dedicated DS3 transport is available as unbundled transport. Additional capacity may be purchased pursuant to the rates, terms and conditions as set forth in the applicable tariff. A route is defined as a transmission path between one of BellSouth’s wire centers or switches and another of BellSouth’s wire centers or switches. A route between two (2) points may pass through one or more intermediate wire centers or switches. Transmission paths between identical end points are the same “route”, irrespective of whether they pass through the same intermediate wire centers or switches, if any.
6.2.4 Any request to re-terminate one end of a circuit will require the issuance of new service and disconnection of the existing service and the applicable charges in Exhibit A shall apply, and the re-terminated circuit shall be considered a new circuit as of the installation date.
6.2.5 If Dedicated Transport is not readily available but can be made available through routine network modifications, as defined by the FCC, Metro Teleconnect Budget Phone may request BellSouth to perform such routine network modifications. The request may not be used to place fiber. Each request will be handled as a project on an individual case basis. BellSouth will provide a price quote for the request, and upon receipt of payment by Metro TeleconnectBudget Phone, BellSouth shall perform the routine network modifications.
Appears in 1 contract
Samples: Interconnection Agreement
