Definition of Pipe movements. The Pipe movements are entered in three directions. The axes of the directions of movement are defined as in Figure 7 (or as described above). A resulting component is calculated from the three path components. The maximum total path is limited to 900 mm. Support data can also be read in from files insofar as they are available. The file menu is opened via the ‘Open File’ button. The file ending ‘LIF’ (LICAD Input File) is preset. The values deposited there are accordingly filled into the input fields of the mask. The values can however still be edited or supplemented.
Definition of Pipe movements. The Pipe movements are entered in three directions. The axes of the directions of movement are defined as in Figure 17 (or as described above). A resulting component is calculated from the three path components. The maximum total path is limited to 900 mm. Support data can also be read in from files insofar as they are available. The file menu is opened via the ‘Open File’ button. The file ending ‘LIF’ (LICAD Input File) is preset. The values deposited there are accordingly filled into the input fields of the mask. The values can however still be edited or supplemented. Figure 7: Definition of the directions of movement The LIF files format corresponds to ASCII, the frame for a so-called INI file. An example of this can be found under chapter 7.8. These files can be made with PDMS or INTERGRAPH software. To enable the alternative input screen refer to Option settings – System setup.
