Common use of Description of Service Clause in Contracts

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU information so that ALTICOMM can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM intends to install and the services ALTICOMM wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMM’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Knology LMU information so that ALTICOMM Knology can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Knology intends to install and the services ALTICOMM Knology wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Knology ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 2.9.1.1 BellSouth will provide ALTICOMM Knology LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 2.9.1.2 BellSouth’s LMU information is provided to ALTICOMM Knology as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 2.9.1.3 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM 2.9.1.4 Knology may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Knology and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMKnology’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. Except for copper only) or Loops that are not intended to support advanced services (such as UVe.g., ADSL, UCL-SL1ND, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loopsetc.), the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Knology is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Freedom LMU information so that ALTICOMM Freedom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Freedom intends to install and the services ALTICOMM Freedom wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Freedom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Freedom LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Freedom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Freedom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Freedom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMFreedom’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Freedom orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Freedom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM CommuniGroup LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM CommuniGroup can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM CommuniGroup intends to install and the services ALTICOMM CommuniGroup wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM CommuniGroup ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM CommuniGroup LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM CommuniGroup as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM CommuniGroup may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM CommuniGroup and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMCommuniGroup’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by CommuniGroup or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. CommuniGroup is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify CommuniGroup, according to the applicable network disclosure requirements. It will be CommuniGroup’s responsibility to move any service it may provide over such facilities to alternative facilities. If CommuniGroup fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU C.M. (LMU) information so that ALTICOMM C.M. can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM C.M. intends to install and the services ALTICOMM C.M. wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM C.M. ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM C.M. LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM C.M. as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM 2.9.1. 5 C.M. may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM C.M. and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMC.M.’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM C.M. orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM C.M. is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Pilgrim Telephone LMU information so that ALTICOMM Pilgrim Telephone can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Pilgrim Telephone intends to install and the services ALTICOMM Pilgrim Telephone wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Pilgrim Telephone ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Pilgrim Telephone LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Pilgrim Telephone as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Pilgrim Telephone may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Pilgrim Telephone and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMPilgrim Telephone’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Pilgrim Telephone orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Pilgrim Telephone is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Symtelco LMU information so that ALTICOMM Symtelco can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Symtelco intends to install and the services ALTICOMM Symtelco wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Symtelco ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Symtelco LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Symtelco as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Symtelco may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Symtelco and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMSymtelco’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Symtelco orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Symtelco is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU Delta Phones (LMU) information so that ALTICOMM Delta Phones can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Delta Phones intends to install and the services ALTICOMM Delta Phones wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Delta Phones ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Delta Phones LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Delta Phones as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Delta Phones may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Delta Phones and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMDelta Phones’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Delta Phones orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Delta Phones is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM DSL LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM DSL can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM DSL intends to install and the services ALTICOMM DSL wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM DSL ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM DSL LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM DSL as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM DSL may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM DSL and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMDSL’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by DSL or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. DSL is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify DSL, according to the applicable network disclosure requirements. It will be DSL’s responsibility to move any service it may provide over such facilities to alternative facilities. If DSL fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM AmeriMex LMU information so that ALTICOMM AmeriMex can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM AmeriMex intends to install and the services ALTICOMM AmeriMex wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM AmeriMex ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM AmeriMex LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM AmeriMex as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM AmeriMex may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM AmeriMex and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMAmeriMex’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM AmeriMex orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM AmeriMex is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM WorldxChange LMU information so that ALTICOMM WorldxChange can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM WorldxChange intends to install and the services ALTICOMM WorldxChange wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM WorldxChange ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM WorldxChange LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM WorldxChange as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM WorldxChange may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM WorldxChange and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMWorldxChange’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM WorldxChange orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM WorldxChange is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Azul Tel LMU information so that ALTICOMM Azul Tel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Azul Tel intends to install and the services ALTICOMM Azul Tel wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Azul Tel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Azul Tel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Azul Tel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Azul Tel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Azul Tel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMAzul Tel’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Azul Tel orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Azul Tel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM ITC^DeltaCom LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM ITC^DeltaCom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM ITC^DeltaCom intends to install and the services ALTICOMM ITC^DeltaCom wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM ITC^DeltaCom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM ITC^DeltaCom LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM ITC^DeltaCom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM ITC^DeltaCom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM ITC^DeltaCom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMITC^DeltaCom’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6 below, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by ITC^DeltaCom or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. ITC^DeltaCom is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 51.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify ITC^DeltaCom, according to the applicable network disclosure requirements. It will be ITC^DeltaCom’s responsibility to move any service it may provide over such facilities to alternative facilities. If ITC^DeltaCom fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM COMTECH21 LMU information so that ALTICOMM COMTECH21 can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM COMTECH21 intends to install and the services ALTICOMM COMTECH21 wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM COMTECH21 ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM COMTECH21 LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM COMTECH21 as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM COMTECH21 may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM COMTECH21 and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMCOMTECH21’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM COMTECH21 orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM COMTECH21 is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM FPB LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM FPB can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM FPB intends to install and the services ALTICOMM FPB wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM FPB ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM FPB LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM FPB as it exists either in BellSouth's ’s databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM FPB may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM FPB and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMFPB’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6 below, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by FPB or the customer, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. FPB is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 51.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify FPB, according to the applicable network disclosure requirements. It will be FPB’s responsibility to move any service it may provide over such facilities to alternative facilities. If FPB fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM AT&T LMU information so that ALTICOMM AT&T can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM AT&T intends to install and the services ALTICOMM AT&T wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM AT&T ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM AT&T LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM AT&T as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of BST will provide LMU information to the requesting CLEC on facilities is contingent upon CLEC, if either BellSouth BST or the requesting CLEC controlling controls the Loop(s) that serve the service location for which LMU information has been requested by requested. When a CLEC other than the CLEC. The requesting CLEC is that controls the loop requests LMU information, BST will not authorized to receive provide the LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on with the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLECLMUSI. 2.9.1.5 ALTICOMM AT&T may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM AT&T and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMAT&T’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM AT&T orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM AT&T is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Metro Teleconnect LMU information so that ALTICOMM Metro Teleconnect can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Metro Teleconnect intends to install and the services ALTICOMM Metro Teleconnect wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Metro Teleconnect ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Metro Teleconnect LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Metro Teleconnect as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Metro Teleconnect may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Metro Teleconnect and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMMetro Teleconnect’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Metro Teleconnect orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Metro Teleconnect is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Southern Telcom LMU information so that ALTICOMM Southern Telcom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Southern Telcom intends to install and the services ALTICOMM Southern Telcom wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Southern Telcom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Southern Telcom LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Southern Telcom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Southern Telcom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Southern Telcom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMSouthern Telcom’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Southern Telcom orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Southern Telcom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Utility USA LMU information so that ALTICOMM Utility USA can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Utility USA intends to install and the services ALTICOMM Utility USA wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Utility USA ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Utility USA LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Utility USA as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Utility USA may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Utility USA and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMUtility USA’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Utility USA orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Utility USA is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM EveryCall LMU information so that ALTICOMM EveryCall can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM EveryCall intends to install and the services ALTICOMM EveryCall wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM EveryCall ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM EveryCall LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM EveryCall as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM EveryCall may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM EveryCall and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMEveryCall’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM EveryCall orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM EveryCall is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Quality Telephone LMU information so that ALTICOMM Quality Telephone can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Quality Telephone intends to install and the services ALTICOMM Quality Telephone wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Quality Telephone ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Quality Telephone LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Quality Telephone as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Quality Telephone may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Quality Telephone and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMQuality Telephone’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Quality Telephone orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Quality Telephone is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Speedy Reconnect LMU information so that ALTICOMM Speedy Reconnect can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Speedy Reconnect intends to install and the services ALTICOMM Speedy Reconnect wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Speedy Reconnect ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Speedy Reconnect LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Speedy Reconnect as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Speedy Reconnect may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Speedy Reconnect and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMSpeedy Reconnect’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Speedy Reconnect orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Speedy Reconnect is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Freedom LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM Freedom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Freedom intends to install and the services ALTICOMM Freedom wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM Freedom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Freedom LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Freedom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Freedom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Freedom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMFreedom’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Freedom or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Freedom is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Freedom, according to the applicable network disclosure requirements. It will be Freedom’s responsibility to move any service it may provide over such facilities to alternative facilities. If Freedom fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Newcomm LMU information so that ALTICOMM Newcomm can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Newcomm intends to install and the services ALTICOMM Newcomm wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Newcomm ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Newcomm LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Newcomm as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Newcomm may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Newcomm and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMNewcomm’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Newcomm orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Newcomm is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM US LEC LMU information so that ALTICOMM US LEC can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM US LEC intends to install and the services ALTICOMM US LEC wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM US LEC ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM US LEC LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM US LEC as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM US LEC may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM US LEC and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMUS LEC’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM US LEC orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM US LEC is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM TeleConex LMU information so that ALTICOMM TeleConex can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM TeleConex intends to install and the services ALTICOMM TeleConex wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM TeleConex ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM TeleConex LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM TeleConex as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM TeleConex may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM TeleConex and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMTeleConex’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM TeleConex orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM TeleConex is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Gateway LMU information so that ALTICOMM Gateway can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Gateway intends to install and the services ALTICOMM Gateway wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Gateway ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Gateway LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Gateway as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Gateway may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Gateway and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMGateway’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Gateway orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Gateway is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM TWTC LMU information so that ALTICOMM TWTC can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM TWTC intends to install and the services ALTICOMM TWTC wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM TWTC ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM TWTC LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM TWTC as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM TWTC may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM TWTC and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMTWTC’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM TWTC orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM TWTC is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Globe LMU information so that ALTICOMM Globe can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Globe intends to install and the services ALTICOMM Globe wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Globe ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Globe LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Globe as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Globe may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Globe and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMGlobe’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Globe orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Globe is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Triarch Marketing LMU information so that ALTICOMM Triarch Marketing can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Triarch Marketing intends to install and the services ALTICOMM Triarch Marketing wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Triarch Marketing ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Triarch Marketing LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Triarch Marketing as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Triarch Marketing may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Triarch Marketing and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMTriarch Marketing’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Triarch Marketing orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Triarch Marketing is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM MTS Communications LMU information so that ALTICOMM MTS Communications can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM MTS Communications intends to install and the services ALTICOMM MTS Communications wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM MTS Communications ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM MTS Communications LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM MTS Communications as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM MTS Communications may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM MTS Communications and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMMTS Communications’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM MTS Communications orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM MTS Communications is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Micro-Comm LMU information so that ALTICOMM Micro- Comm can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Micro-Comm intends to install and the services ALTICOMM Micro-Comm wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Micro-Comm ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Micro-Comm LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Micro-Comm as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Micro-Comm may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Micro-Comm and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMMicro-Comm’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Micro-Comm orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Micro-Comm is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Charter LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM Charter can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Charter intends to install and the services ALTICOMM Charter wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM Charter ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Charter LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Charter as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Charter may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Charter and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMCharter’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Charter or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Charter is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Charter, according to the applicable network disclosure requirements. It will be Charter’s responsibility to move any service it may provide over such facilities to alternative facilities. If Charter fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM GSC LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM GSC can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM GSC intends to install and the services ALTICOMM GSC wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM GSC ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM GSC LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM GSC as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM GSC may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM GSC and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMGSC’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by GSC or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. GSC is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify GSC, according to the applicable network disclosure requirements. It will be GSC’s responsibility to move any service it may provide over such facilities to alternative facilities. If GSC fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU Oronoco (LMU) information so that ALTICOMM Oronoco can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Oronoco intends to install and the services ALTICOMM Oronoco wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Oronoco ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Oronoco LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Oronoco as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Oronoco may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth networkLoop. The determination shall be made solely by ALTICOMM Oronoco and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMOronoco’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Oronoco orders Loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Oronoco is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU Xxx.Xxx (LMU) information so that ALTICOMM Xxx.Xxx can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Xxx.Xxx intends to install and the services ALTICOMM Xxx.Xxx wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Xxx.Xxx ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Xxx.Xxx LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Xxx.Xxx as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Xxx.Xxx may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth networkLoop. The determination shall be made solely by ALTICOMM Xxx.Xxx and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMXxx.Xxx’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Xxx.Xxx orders Loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Xxx.Xxx is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU IDS Telcom (LMU) information so that ALTICOMM IDS Telcom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM IDS Telcom intends to install and the services ALTICOMM IDS Telcom wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM IDS Telcom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM IDS Telcom LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM IDS Telcom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM IDS Telcom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM IDS Telcom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMIDS Telcom’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM IDS Telcom orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM IDS Telcom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Azul Tel LMU information so that ALTICOMM Azul Tel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Azul Tel intends to install and the services ALTICOMM Azul Tel wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Azul Tel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Azul Tel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Azul Tel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Azul Tel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Azul Tel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMAzul Tel’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Azul Tel orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Azul Tel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Unity Acquisition LMU information so that ALTICOMM Unity Acquisition can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Unity Acquisition intends to install and the services ALTICOMM Unity Acquisition wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Unity Acquisition ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Unity Acquisition LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Unity Acquisition as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Unity Acquisition may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Unity Acquisition and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMUnity Acquisition’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Unity Acquisition orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Unity Acquisition is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM EPICUS LMU information so that ALTICOMM EPICUS can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM EPICUS intends to install and the services ALTICOMM EPICUS wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM EPICUS ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM EPICUS LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM EPICUS as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM EPICUS may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM EPICUS and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMEPICUS’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM EPICUS orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM EPICUS is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM ConnectNow! LMU information so that ALTICOMM ConnectNow! can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM ConnectNow! intends to install and the services ALTICOMM ConnectNow! wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM ConnectNow! ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM ConnectNow! LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM ConnectNow! as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM 2.9.1. 5 ConnectNow! may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM ConnectNow! and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMConnectNow!’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM ConnectNow! orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM ConnectNow! is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Northeast LMU information so that ALTICOMM Northeast can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Northeast intends to install and the services ALTICOMM Northeast wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Northeast ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Northeast LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Northeast as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Northeast may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Northeast and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMNortheast’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Northeast orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Northeast is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM BroadRiver LMU information so that ALTICOMM BroadRiver can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM BroadRiver intends to install and the services ALTICOMM BroadRiver wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM BroadRiver ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM BroadRiver LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM BroadRiver as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth AMENDMENT EXHIBIT 1 Attachment 2 Page 26 receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM BroadRiver may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM BroadRiver and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMBroadRiver’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM BroadRiver orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM BroadRiver is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Xxxx Communications LMU information so that ALTICOMM Xxxx Communications can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Xxxx Communications intends to install and the services ALTICOMM Xxxx Communications wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Xxxx Communications ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Xxxx Communications LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Xxxx Communications as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Xxxx Communications may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Xxxx Communications and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMXxxx Communications’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Xxxx Communications orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Xxxx Communications is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Deland Actel LMU information so that ALTICOMM Deland Actel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Deland Actel intends to install and the services ALTICOMM Deland Actel wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Deland Actel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Deland Actel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Deland Actel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Deland Actel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Deland Actel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMDeland Actel’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Deland Actel orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Deland Actel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM C.M. LMU information so that ALTICOMM C.M. can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM C.M. intends to install and the services ALTICOMM C.M. wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM C.M. ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM C.M. LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM C.M. as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM C.M. may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM C.M. and BellSouth XxxxXxxxx shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMC.M.’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM C.M. orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM C.M. is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM DeltaCom LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM DeltaCom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM DeltaCom intends to install and the services ALTICOMM DeltaCom wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM DeltaCom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM DeltaCom LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM DeltaCom as it exists either in BellSouth's ’s databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM DeltaCom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM DeltaCom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMDeltaCom’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6 below, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by DeltaCom or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. DeltaCom is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 51.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify DeltaCom, according to the applicable network disclosure requirements. It will be DeltaCom’s responsibility to move any service it may provide over such facilities to alternative facilities. If DeltaCom fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Micro-Comm LMU information so that ALTICOMM Micro- Comm can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Micro-Comm intends to install and the services ALTICOMM Micro-Comm wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Micro-Comm ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Micro-Comm LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Micro-Comm as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Micro-Comm may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Micro-Comm and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMMicro-Comm’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Micro-Comm orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Micro-Comm is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM MyLineToo LMU information so that ALTICOMM MyLineToo can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM MyLineToo intends to install and the services ALTICOMM MyLineToo wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM MyLineToo ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM MyLineToo LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM MyLineToo as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM MyLineToo may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM MyLineToo and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMMyLineToo’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM MyLineToo orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM MyLineToo is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM TCG LMU information so that ALTICOMM TCG can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM TCG intends to install and the services ALTICOMM TCG wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM TCG ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM TCG LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM TCG as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of BST will provide LMU information to the requesting CLEC on facilities is contingent upon CLEC, if either BellSouth BST or the requesting CLEC controlling controls the Loop(s) that serve the service location for which LMU information has been requested by requested. When a CLEC other than the CLEC. The requesting CLEC is that controls the loop requests LMU information, BST will not authorized to receive provide the LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on with the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLECLMUSI. 2.9.1.5 ALTICOMM TCG may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM TCG and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMTCG’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM TCG orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM TCG is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Advantage Group LMU information so that ALTICOMM Advantage Group can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Advantage Group intends to install and the services ALTICOMM Advantage Group wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Advantage Group ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Advantage Group LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Advantage Group as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Advantage Group may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Advantage Group and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMAdvantage Group’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Advantage Group orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Advantage Group is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Lightning Communications LMU information so that ALTICOMM Lightning Communications can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Lightning Communications intends to install and the services ALTICOMM Lightning Communications wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Lightning Communications ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Lightning Communications LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Lightning Communications as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Lightning Communications may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Lightning Communications and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMLightning Communications’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Lightning Communications orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Lightning Communications is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM InterGlobe LMU information so that ALTICOMM InterGlobe can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM InterGlobe intends to install and the services ALTICOMM InterGlobe wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM InterGlobe ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM InterGlobe LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM InterGlobe as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM InterGlobe may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM InterGlobe and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMInterGlobe’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM InterGlobe orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM InterGlobe is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Birch LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM Xxxxx can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Birch intends to install and the services ALTICOMM Birch wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM Birch ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Birch LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Birch as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Birch may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Xxxxx and BellSouth XxxxXxxxx shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMBirch’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Birch or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Birch is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Birch, according to the applicable network disclosure requirements. It will be Xxxxx’x responsibility to move any service it may provide over such facilities to alternative facilities. If Xxxxx fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Seven Bridges LMU information so that ALTICOMM Seven Bridges can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Seven Bridges intends to install and the services ALTICOMM Seven Bridges wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Seven Bridges ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Seven Bridges LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Seven Bridges as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU AMENDMENT EXHIBIT 1 Attachment 2 Page 26 information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Seven Bridges may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Seven Bridges and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMSeven Bridges’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Seven Bridges orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Seven Bridges is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM FLATEL LMU information so that ALTICOMM FLATEL can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM FLATEL intends to install and the services ALTICOMM FLATEL wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM FLATEL ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM FLATEL LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM FLATEL as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM FLATEL may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM FLATEL and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMFLATEL’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM FLATEL orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM FLATEL is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM BCFL LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM BCFL can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM BCFL intends to install and the services ALTICOMM BCFL wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM BCFL ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM BCFL LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM BCFL as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM BCFL may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM BCFL and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMBCFL’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by BCFL or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. BCFL is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify BCFL, according to the applicable network disclosure requirements. It will be BCFL’s responsibility to move any service it may provide over such facilities to alternative facilities. If BCFL fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM International Telnet LMU information so that ALTICOMM International Telnet can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM International Telnet intends to install and the services ALTICOMM International Telnet wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM International Telnet ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM International Telnet LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM International Telnet as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM International Telnet may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM International Telnet and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMInternational Telnet’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM International Telnet orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM International Telnet is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Conextel LMU information so that ALTICOMM Conextel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Conextel intends to install and the services ALTICOMM Conextel wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Conextel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Conextel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Conextel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Conextel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Conextel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMConextel’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Conextel orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Conextel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM OnePoint LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM OnePoint can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM OnePoint intends to install and the services ALTICOMM OnePoint wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM OnePoint ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM OnePoint LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM OnePoint as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM OnePoint may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM OnePoint and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMOnePoint’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by OnePoint or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. OnePoint is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify OnePoint, according to the applicable network disclosure requirements. It will be OnePoint’s responsibility to move any service it may provide over such facilities to alternative facilities. If OnePoint fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Deland Actel LMU information so that ALTICOMM Deland Actel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Deland Actel intends to install and the services ALTICOMM Deland Actel wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Deland Actel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Deland Actel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Deland Actel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Deland Actel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Deland Actel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMDeland Actel’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Deland Actel orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Deland Actel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM C.M. LMU information so that ALTICOMM C.M. can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM C.M. intends to install and the services ALTICOMM C.M. wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM C.M. ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM C.M. LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM C.M. as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM C.M. may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM C.M. and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMC.M.’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM C.M. orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM C.M. is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM GulfPines LMU information so that ALTICOMM GulfPines can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM GulfPines intends to install and the services ALTICOMM GulfPines wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM GulfPines ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM GulfPines LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM GulfPines as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC GulfPines on facilities is contingent upon either BellSouth or the requesting CLEC GulfPines controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLECGulfPines. The requesting CLEC GulfPines is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLECGulfPines. 2.9.1.5 ALTICOMM GulfPines may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM GulfPines and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMM’s GulfPines’ ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM GulfPines orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM GulfPines is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Xxx.Xxx LMU information so that ALTICOMM Xxx.Xxx can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Xxx.Xxx intends to install and the services ALTICOMM Xxx.Xxx wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Xxx.Xxx ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Xxx.Xxx LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Xxx.Xxx as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Xxx.Xxx may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Xxx.Xxx and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMXxx.Xxx’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Xxx.Xxx orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Xxx.Xxx is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM NGTelecom LMU information so that ALTICOMM NGTelecom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM NGTelecom intends to install and the services ALTICOMM NGTelecom wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM NGTelecom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM NGTelecom LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM NGTelecom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM NGTelecom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM NGTelecom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMNGTelecom’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM NGTelecom orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM NGTelecom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM VarTec LMU information so that ALTICOMM VarTec can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM VarTec intends to install and the services ALTICOMM VarTec wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM VarTec ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM VarTec LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM VarTec as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM VarTec may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM VarTec and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMVarTec’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM VarTec orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM VarTec is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM A-Tech Telecom LMU information so that ALTICOMM A- Tech Telecom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM A-Tech Telecom intends to install and the services ALTICOMM A-Tech Telecom wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM A-Tech Telecom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM A-Tech Telecom LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM A-Tech Telecom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM A-Tech Telecom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM A-Tech Telecom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMA-Tech Telecom’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM A-Tech Telecom orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM A-Tech Telecom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Ring Connection LMU information so that ALTICOMM Ring Connection can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Ring Connection intends to install and the services ALTICOMM Ring Connection wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Ring Connection ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Ring Connection LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Ring Connection as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Ring Connection may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Ring Connection and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMRing Connection’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Ring Connection orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Ring Connection is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM AmTel LMU information so that ALTICOMM AmTel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM AmTel intends to install and the services ALTICOMM AmTel wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM AmTel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM AmTel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM AmTel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM AmTel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM AmTel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMAmTel’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM AmTel orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM AmTel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM PLI LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM PLI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM PLI intends to install and the services ALTICOMM PLI wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM PLI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM PLI LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM PLI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM PLI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM PLI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMPLI’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by PLI or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. PLI is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify PLI, according to the applicable network disclosure requirements. It will be PLI’s responsibility to move any service it may provide over such facilities to alternative facilities. If PLI fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM e-Tel LMU information so that ALTICOMM e-Tel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM e-Tel intends to install and the services ALTICOMM e-Tel wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM e-Tel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM e-Tel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM e-Tel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM 2.9.1. 5 e-Tel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM e-Tel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMe-Tel’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM e-Tel orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM e-Tel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU Creative Telecom Loop Makeup (LMU) information so that ALTICOMM Creative Telecom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Creative Telecom intends to install and the services ALTICOMM Creative Telecom wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Creative Telecom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Creative Telecom LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Creative Telecom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Creative Telecom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth networkLoop. The determination shall be made solely by ALTICOMM Creative Telecom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMCreative Telecom’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Creative Telecom orders Loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Creative Telecom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Preferred LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM Preferred can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Preferred intends to install and the services ALTICOMM Preferred wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM Preferred ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Preferred LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Preferred as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Preferred may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Preferred and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMPreferred’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Preferred or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Preferred is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Preferred, according to the applicable network disclosure requirements. It will be Preferred’s responsibility to move any service it may provide over such facilities to alternative facilities. If Preferred fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM ABC Telcom LMU information so that ALTICOMM ABC Telcom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM ABC Telcom intends to install and the services ALTICOMM ABC Telcom wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM ABC Telcom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM ABC Telcom LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM ABC Telcom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM ABC Telcom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM ABC Telcom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMABC Telcom’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM ABC Telcom orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM ABC Telcom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU FLATEL (LMU) information so that ALTICOMM FLATEL can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM FLATEL intends to install and the services ALTICOMM FLATEL wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM FLATEL ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM FLATEL LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM FLATEL as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM FLATEL may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM FLATEL and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMFLATEL’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM FLATEL orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM FLATEL is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM DPI Teleconnect LMU information so that ALTICOMM DPI Teleconnect can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM DPI Teleconnect intends to install and the services ALTICOMM DPI Teleconnect wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM DPI Teleconnect ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM DPI Teleconnect LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM DPI Teleconnect as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM DPI Teleconnect may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM DPI Teleconnect and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMDPI Teleconnect’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM DPI Teleconnect orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM DPI Teleconnect is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Globe LMU information so that ALTICOMM Globe can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Globe intends to install and the services ALTICOMM Globe wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Globe ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 2.9.1.1 BellSouth will provide ALTICOMM Globe LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 2.9.1.2 BellSouth’s LMU information is provided to ALTICOMM Globe as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 2.9.1.3 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM 2.9.1.4 Globe may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Globe and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMGlobe’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. Except for copper only) or Loops that are not intended to support advanced services (such as UVe.g., ADSL, UCL-SL1ND, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loopsetc.), the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Globe is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM LMU e-Tel (LMU) information so that ALTICOMM e-Tel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM e-Tel intends to install and the services ALTICOMM e-Tel wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM e-Tel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM e-Tel LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM e-Tel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM 2.9.1. 5 e-Tel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM e-Tel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMe-Tel’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM e-Tel orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM e-Tel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Sprint LMU information with respect to Loops that are required to be unbundled under this Agreement so that ALTICOMM Sprint can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Sprint intends to install and the services ALTICOMM Sprint wishes to provide. This section addresses LMU as is a preordering transaction, distinct from ALTICOMM Sprint ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Sprint LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Sprint as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Sprint may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Sprint and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMSprint’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Sprint or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Sprint is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Sprint, according to the applicable network disclosure requirements. It will be Sprint’s responsibility to move any service it may provide over such facilities to alternative facilities. If Sprint fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM BULLSEYE LMU information so that ALTICOMM BULLSEYE can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM BULLSEYE intends to install and the services ALTICOMM BULLSEYE wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM BULLSEYE ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM BULLSEYE LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM BULLSEYE as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM BULLSEYE may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM BULLSEYE and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMBULLSEYE’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM BULLSEYE orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM BULLSEYE is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Comm South LMU information so that ALTICOMM Comm South can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Comm South intends to install and the services ALTICOMM Comm South wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Comm South ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Comm South LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Comm South as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Comm South may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Comm South and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMComm South’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Comm South orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Comm South is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM US LEC LMU information so that ALTICOMM US LEC can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM US LEC intends to install and the services ALTICOMM US LEC wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM US LEC ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM US LEC LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM US LEC as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM 2.9.1. 5 US LEC may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM US LEC and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMUS LEC’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM US LEC orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM US LEC is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Sail Networks LMU information so that ALTICOMM Sail Networks can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Sail Networks intends to install and the services ALTICOMM Sail Networks wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Sail Networks ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Sail Networks LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Sail Networks as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Sail Networks may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Sail Networks and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMSail Networks’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM Sail Networks orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Sail Networks is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM Knology LMU information so that ALTICOMM Knology can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM Knology intends to install and the services ALTICOMM Knology wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM Knology ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Up loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM Knology LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM Knology as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM Knology may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM Knology and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMKnology’s ability to provide advanced data services over the ordered Loop loop type. Further, if ALTICOMM Knology orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM Knology is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM ConnectNow! LMU information so that ALTICOMM ConnectNow! can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM ConnectNow! intends to install and the services ALTICOMM ConnectNow! wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM ConnectNow! ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering Loop Make- Up LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM ConnectNow! LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM ConnectNow! as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM ConnectNow! may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM ConnectNow! and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMConnectNow!’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM ConnectNow! orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM ConnectNow! is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to ALTICOMM SUN-TEL LMU information so that ALTICOMM SUN-TEL can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment ALTICOMM SUN-TEL intends to install and the services ALTICOMM SUN-TEL wishes to provide. This section addresses LMU as a preordering transaction, distinct from ALTICOMM SUN-TEL ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering Loop Make- Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide ALTICOMM SUN-TEL LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to ALTICOMM SUN-TEL as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 ALTICOMM SUN-TEL may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by ALTICOMM SUN-TEL and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee ALTICOMMSUN-TEL’s ability to provide advanced data services over the ordered Loop type. Further, if ALTICOMM SUN-TEL orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. ALTICOMM SUN-TEL is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.