Common use of Description of Service Clause in Contracts

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop LMU information so that CBX One-Stop can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop intends to install and the services CBX One-Stop wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-Stop’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop USA Telecom, Inc. LMU information so that CBX One-Stop USA Telecom, Inc. can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop USA Telecom, Inc. intends to install and the services CBX One-Stop USA Telecom, Inc. wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop USA Telecom, Inc. ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop USA Telecom, Inc. LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop USA Telecom, Inc. as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop USA Telecom, Inc. may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop USA Telecom, Inc. and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopUSA Telecom, Inc.’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop USA Telecom, Inc. orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop USA Telecom, Inc. is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop intends to install and the services CBX One-Stop wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-Stop’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by CBX One-Stop or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. CBX One-Stop is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify CBX One-Stop, according to the applicable network disclosure requirements. It will be CBX One- Stop’s responsibility to move any service it may provide over such facilities to alternative facilities. If CBX One-Stop fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX OneMicro-Stop Comm LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop Micro- Comm can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX OneMicro-Stop Comm intends to install and the services CBX OneMicro-Stop Comm wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX OneMicro-Stop Comm ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX OneMicro-Stop Comm LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX OneMicro-Stop Comm as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX OneMicro-Stop Comm may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX OneMicro-Stop Comm and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX OneMicro-StopComm’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Micro-Comm or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Micro-Comm is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Micro-Comm, according to the applicable network disclosure requirements. It will be Micro- Comm’s responsibility to move any service it may provide over such facilities to alternative facilities. If Micro-Comm fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX OneNex-Stop Phon LMU information so that CBX OneNex-Stop Phon can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX OneNex-Stop Phon intends to install and the services CBX OneNex-Stop Phon wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX OneNex-Stop Phon ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX OneNex-Stop Phon LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX OneNex-Stop Phon as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth XxxxXxxxx receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX OneNex-Stop Phon may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX OneNex-Stop Phon and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX OneNex-StopPhon’s ability to provide advanced data services over the ordered Loop type. Further, if CBX OneNex-Stop Phon orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneNex-Stop Phon is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop eXpeTel LMU information so that CBX One-Stop eXpeTel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop eXpeTel intends to install and the services CBX One-Stop eXpeTel wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop eXpeTel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU Loop Make-Up are likewise unique from other preordering functions with associated SIs service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop eXpeTel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop eXpeTel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for on facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop eXpeTel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop eXpeTel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopeXpeTel’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop eXpeTel orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop eXpeTel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Conextel LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop Conextel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Conextel intends to install and the services CBX One-Stop Conextel wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop Conextel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Conextel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Conextel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Conextel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Conextel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopConextel’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Conextel or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Conextel is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Conextel, according to the applicable network disclosure requirements. It will be Conextel’s responsibility to move any service it may provide over such facilities to alternative facilities. If Conextel fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Telstar Communications LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop Telstar Communications can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Telstar Communications intends to install and the services CBX One-Stop Telstar Communications wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop Telstar Communications ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Telstar Communications LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Telstar Communications as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Telstar Communications may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Telstar Communications and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopTelstar Communications’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Telstar Communications or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Telstar Communications is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Telstar Communications, according to the applicable network disclosure requirements. It will be Telstar Communications’s responsibility to move any service it may provide over such facilities to alternative facilities. If Telstar Communications fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop LMU XXXxxxx.xxx (LMU) information so that CBX One-Stop XXXxxxx.xxx can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop XXXxxxx.xxx intends to install and the services CBX One-Stop XXXxxxx.xxx wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop XXXxxxx.xxx ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU loop makeup are likewise unique from other preordering functions with associated SIs service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop XXXxxxx.xxx LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop XXXxxxx.xxx as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop XXXxxxx.xxx may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop XXXxxxx.xxx and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopXXXxxxx.xxx’s ability to provide advanced data services over the ordered Loop loop type. Further, if CBX One-Stop XXXxxxx.xxx orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop XXXxxxx.xxx is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX OneNex-Stop Phon LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX OneNex-Stop Phon can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX OneNex-Stop Phon intends to install and the services CBX OneNex-Stop Phon wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX OneNex-Stop Phon ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX OneNex-Stop Phon LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX OneNex-Stop Phon as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX OneNex-Stop Phon may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX OneNex-Stop Phon and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX OneNex-StopPhon’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Nex-Phon or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Nex-Phon is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Nex-Phon, according to the applicable network disclosure requirements. It will be Nex- Phon’s responsibility to move any service it may provide over such facilities to alternative facilities. If Nex-Phon fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX OneU-Stop Dial LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX OneU-Stop Dial can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX OneU-Stop Dial intends to install and the services CBX OneU-Stop Dial wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX OneU-Stop Dial ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX OneU-Stop Dial LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX OneU-Stop Dial as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX OneU-Stop Dial may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX OneU-Stop Dial and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX OneU-StopDial’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by U- Dial or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. U-Dial is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify U-Dial, according to the applicable network disclosure requirements. It will be U-Dial’s responsibility to move any service it may provide over such facilities to alternative facilities. If U-Dial fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Seven Bridges LMU information so that CBX One-Stop Seven Bridges can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Seven Bridges intends to install and the services CBX One-Stop Seven Bridges wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop Seven Bridges ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Seven Bridges LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Seven Bridges as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU AMENDMENT EXHIBIT 1 Attachment 2 Page 26 information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Seven Bridges may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Seven Bridges and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopSeven Bridges’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop Seven Bridges orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop Seven Bridges is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop ConnectNow! LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop ConnectNow! can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop ConnectNow! intends to install and the services CBX One-Stop ConnectNow! wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop ConnectNow! ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop ConnectNow! LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop ConnectNow! as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop ConnectNow! may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop ConnectNow! and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopConnectNow!’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by ConnectNow! or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. ConnectNow! is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify ConnectNow!, according to the applicable network disclosure requirements. It will be ConnectNow!’s responsibility to move any service it may provide over such facilities to alternative facilities. If ConnectNow! fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop LMU Southern Digital (LMU) information so that CBX One-Stop Southern Digital can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Southern Digital intends to install and the services CBX One-Stop Southern Digital wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop Southern Digital ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU loop makeup are likewise unique from other preordering functions with associated SIs service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Southern Digital LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Southern Digital as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided, but the information provided will be the same as BellSouth has available for its own use. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Southern Digital may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Southern Digital and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopSouthern Digital’s ability to provide advanced data services over the ordered Loop loop type. Further, if CBX One-Stop Southern Digital orders Loops loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop Southern Digital is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop FeroNetworks LMU information so that CBX One-Stop FeroNetworks can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop FeroNetworks intends to install and the services CBX One-Stop FeroNetworks wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop FeroNetworks ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop FeroNetworks LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop FeroNetworks as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop FeroNetworks may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop FeroNetworks and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopFeroNetworks’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop FeroNetworks orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop FeroNetworks is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX OneRent-Stop A-Line LMU information so that CBX OneRent-Stop A- Line can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX OneRent-Stop A-Line intends to install and the services CBX OneRent-Stop A-Line wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX OneRent-Stop A-Line ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX OneRent-Stop A-Line LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX OneRent-Stop A-Line as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX OneRent-Stop A-Line may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX OneRent-Stop A-Line and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX OneRent-StopA-Line’s ability to provide advanced data services over the ordered Loop type. Further, if CBX OneRent-Stop A-Line orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneRent-Stop A-Line is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Georgia Prepaid LMU information so that CBX One-Stop Georgia Prepaid can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Georgia Prepaid intends to install and the services CBX One-Stop Georgia Prepaid wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop Georgia Prepaid ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Georgia Prepaid LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Georgia Prepaid as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the AMENDMENT EXHIBIT 1 Attachment 2 Page 26 Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Georgia Prepaid may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Georgia Prepaid and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopGeorgia Prepaid’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop Georgia Prepaid orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop Georgia Prepaid is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Southern Digital LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop Southern Digital can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Southern Digital intends to install and the services CBX One-Stop Southern Digital wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop Southern Digital ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Southern Digital LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Southern Digital as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided, but in any case LMU information will be provided at parity. . 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Southern Digital may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Southern Digital and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopSouthern Digital’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6 below, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Southern Digital or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Southern Digital is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 51.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Southern Digital, according to the applicable network disclosure requirements. It will be Southern Digital’s responsibility to move any service it may provide over such facilities to alternative facilities. If Southern Digital fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Global Dialtone LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop Global Dialtone can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Global Dialtone intends to install and the services CBX One-Stop Global Dialtone wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop Global Dialtone ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Global Dialtone LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Global Dialtone as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Global Dialtone may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Global Dialtone and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopGlobal Dialtone’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6 below, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Global Dialtone or the customer, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Global Dialtone is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 51.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Global Dialtone, according to the applicable network disclosure requirements. It will be Global Dialtone’s responsibility to move any service it may provide over such facilities to alternative facilities. If Global Dialtone fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Clearwave Communications LMU information so that CBX One-Stop Clearwave Communications can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Clearwave Communications intends to install and the services CBX One-Stop Clearwave Communications wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop Clearwave Communications ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Clearwave Communications LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Clearwave Communications as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Clearwave Communications may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Clearwave Communications and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopClearwave Communications’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop Clearwave Communications orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop Clearwave Communications is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop InterGlobe LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop InterGlobe can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop InterGlobe intends to install and the services CBX One-Stop InterGlobe wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop InterGlobe ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop InterGlobe LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop InterGlobe as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop InterGlobe may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop InterGlobe and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopInterGlobe’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by InterGlobe or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. InterGlobe is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify InterGlobe, according to the applicable network disclosure requirements. It will be InterGlobe’s responsibility to move any service it may provide over such facilities to alternative facilities. If InterGlobe fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop EZ Communications LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop EZ Communications can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop EZ Communications intends to install and the services CBX One-Stop EZ Communications wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop EZ Communications ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop EZ Communications LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop EZ Communications as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop EZ Communications may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop EZ Communications and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopEZ Communications’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by EZ Communications or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. EZ Communications is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify EZ Communications, according to the applicable network disclosure requirements. It will be EZ Communications’s responsibility to move any service it may provide over such facilities to alternative facilities. If EZ Communications fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop LMU NAS Loop Makeup (LMU) information so that CBX One-Stop NAS can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop NAS intends to install and the services CBX One-Stop NAS wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One-Stop NAS ordering any other service(s). Loop Makeup LMU Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU loop makeup are likewise unique from other preordering functions with associated SIs service inquiries (SIs) as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop NAS LMU information consisting of the composition of the Loop loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop NAS as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for on facilities is contingent upon either BellSouth or the requesting CLEC controlling owning the Loop(sloop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop NAS may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth networkLoop. The determination shall be made solely by CBX One-Stop NAS and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-Stop’s NAS’ ability to provide advanced data services over the ordered Loop loop type. Further, if CBX One-Stop NAS orders Loops that do not require a specific facility medium (i.e. copper only) or Loops loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loopsloops) and that are not inventoried as advanced services Loopsloops, the LMU information for such Loops loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One-Stop NAS is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Speedy Reconnect LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop Speedy Reconnect can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Speedy Reconnect intends to install and the services CBX One-Stop Speedy Reconnect wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop Speedy Reconnect ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Speedy Reconnect LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Speedy Reconnect as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Speedy Reconnect may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Speedy Reconnect and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopSpeedy Reconnect’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Speedy Reconnect or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Speedy Reconnect is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Speedy Reconnect, according to the applicable network disclosure requirements. It will be Speedy Reconnect’s responsibility to move any service it may provide over such facilities to alternative facilities. If Speedy Reconnect fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One1-Stop 800-RECONEX LMU information so that CBX One1- 800-Stop RECONEX can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One1-Stop 800-RECONEX intends to install and the services CBX One1-Stop 800-RECONEX wishes to provide. This section addresses LMU as a preordering transaction, distinct from CBX One1-Stop 800-RECONEX ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One1-Stop 800-RECONEX LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One1-Stop 800-RECONEX as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One2.9.1. 5 1-Stop 800-RECONEX may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One1-Stop 800-RECONEX and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One1-Stop800-RECONEX’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One1-Stop 800-RECONEX orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX One1-Stop 800-RECONEX is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Excel PCHP LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop Excel PCHP can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Excel PCHP intends to install and the services CBX One-Stop Excel PCHP wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop Excel PCHP ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Excel PCHP LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Excel PCHP as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Excel PCHP may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Excel PCHP and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopExcel PCHP’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Excel PCHP or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Excel PCHP is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Excel PCHP, according to the applicable network disclosure requirements. It will be Excel PCHP’s responsibility to move any service it may provide over such facilities to alternative facilities. If Excel PCHP fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop FLATEL LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop FLATEL can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop FLATEL intends to install and the services CBX One-Stop FLATEL wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop FLATEL ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop FLATEL LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop FLATEL as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop FLATEL may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop FLATEL and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopFLATEL’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by FLATEL or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. FLATEL is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify FLATEL, according to the applicable network disclosure requirements. It will be FLATEL’s responsibility to move any service it may provide over such facilities to alternative facilities. If FLATEL fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.

Description of Service. 2.9.1.1 BellSouth shall make available to CBX One-Stop Deland Actel LMU information with respect to Loops that are required to be unbundled under this Agreement so that CBX One-Stop Deland Actel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment CBX One-Stop Deland Actel intends to install and the services CBX One-Stop Deland Actel wishes to provide. This section addresses LMU as is a preordering transaction, distinct from CBX One-Stop Deland Actel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide CBX One-Stop Deland Actel LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to CBX One-Stop Deland Actel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 CBX One-Stop Deland Actel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by CBX One-Stop Deland Actel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee CBX One-StopDeland Actel’s ability to provide advanced data services over the ordered Loop type. Further, if CBX One-Stop orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services LoopsFurthermore, the LMU information for such Loops other than copper-only Loops (e.g., ADSL, UCL- ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. CBX OneExcept as set forth in Section 2.9.1.6, copper-Stop only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by Deland Actel or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. Deland Actel is fully responsible for any of its service configurations that may differ from BellSouth's ’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify Deland Actel, according to the applicable network disclosure requirements. It will be Deland Actel’s responsibility to move any service it may provide over such facilities to alternative facilities. If Deland Actel fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.