Description of Services by Position Category
Description of Services by Position Category Sample Clauses
Related to Description of Services by Position Category
Description of Services A description of Google Workspace for Education Service provided by Google is set forth in the Services Summary located at xxxxx://xxxxxxxxx.xxxxxx.xxx/terms/user_features.html.
Detailed Description of Services / Statement of Work Describe fully the services that Contractor will provide, or add and attach Exhibit B to this Agreement.
General Description of Services The A-E will be contacted by County Project Management staff on an “as-needed” basis as projects arise to provide A-E for professional services. Requirements will be discussed by both Parties and A-E shall prepare a written Scope Statement that will include the specific work to be performed, including the costs and time required to complete the project/task. Orange County Project Management staff will then review the A-E’s Scope Statement, proceed with negotiation of task costs and when satisfied, issue a Contract Task Order (“CTO”) against this Contract. The A-E shall serve as lead of a design team that may include other construction design professionals working together to ensure that the original design is carried through to the finished product, with no alterations in materials or design that would lead to safety issues or compromise the quality of the building or building component. Other team members who may be retained by the lead to support a project as a consultant may include but are not limited to landscape architects, lighting designers, data consultants, security consultants, controls engineers, commissioning consultants, traffic engineers, surveyors, estimators, special inspection, etc. The A-E shall be responsible for the preparation of comprehensive building assessments, designs, drawings, specifications, cost estimates, and reports within the scope of the CTO. In the preparation of construction drawings and specification, the A-E shall also responsible for: A. Obtaining data by reviewing record drawings, visiting the site of the construction and by conferences with the User/Client and facility maintenance staff or by other actions as necessary to develop the design; B. Checking of shop drawings, submittals, materials and other data submitted by the Construction Contractor for approval; C. Furnishing consultation and advice to County to clarify the intent of the drawings and specifications and on questions that may arise during the construction of the project; D. Space planning, programming and code compliance review and upgrades; E. The meeting of submittal dates included in the Scope Statement of the Contract Task Order, including the work of consultants; F. Coordination with various agencies having authority of jurisdiction for planning services, entitlement, fire life safety, CEQA, ADA, etc.; G. Construction administration services, testing and commissioning; H. Close out services, as-built plans, material lists, project acceptance, etc. I. The coordination of the various elements of the design to assure compatibility of architectural, structural, electrical, mechanical/plumbing, and other design features; J. Other services as specifically included in the Contract Task Order related to project Initiation, Planning/Design, Bid/Award, Construction and Closeout. The A-E shall restrict themselves to the Scope Statement of the Contract Task Order. Any changes in the Scope Statement shall require prior written authorization by County.
Description of Service 2.9.1.1 BellSouth shall make available to AirCover LMU information so that AirCover can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment AirCover intends to install and the services AirCover wishes to provide. This section addresses LMU as a preordering transaction, distinct from AirCover ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide AirCover LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to AirCover as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 AirCover may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by AirCover and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee AirCover’s ability to provide advanced data services over the ordered Loop type. Further, if AirCover orders Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible Loops) and that are not inventoried as advanced services Loops, the LMU information for such Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. AirCover is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the Loop type ordered.
Scope of Services The specific scope of work for each job shall be determined in advance and in writing between TIPS Member, Member’s design professionals and Vendor. It is permitted for the TIPS Member to provide a general scope description, but the awarded vendor should provide a written scope of work, and if applicable, according to the TIPS Member’s design Professional as part of the proposal. Once the scope of the job is agreed to, the TIPS Member will issue a PO and/or an Agreement or Contract with the Job Order Contract Proposal referenced or as an attachment along with bond and any other special provisions agreed by the TIPS Member. If special terms and conditions other than those covered within this solicitation and awarded Agreements are required, they will be attached to the PO and/or an Agreement or Contract and shall take precedence over those in this base TIPS Vendor Agreement.
Attachment A, Scope of Services The scope of services is amended as follows:
Completion of Services (a) The Customer must: (i) notify Deswik in writing as soon as the Customer becomes aware of any defects in the Services; or (ii) provide Deswik with an email confirming successful completion of any Services Deswik advises the Customer have been completed. (b) If the Customer does not notify Deswik of any defects under clause 5.4(a)(i) or provide Deswik with an email confirming successful completion of the Services within 14 days of Deswik notifying the Customer that the relevant Services are complete, the Customer is deemed to have accepted the Services. (c) If the Customer notifies Deswik of any defects under clause 5.4(a)(i), Deswik will, as soon as possible investigate and (where applicable) undertake rectification of the defects. Upon completion of any defect rectification the Customer must promptly provide an email notification of the successful completion of the services, unless further defects exist. In this case, the Customer is further required to notify Deswik of such defects.
Description of Administration Services on a Continuous Basis (a) PNC will perform the following administration services with respect to each Portfolio: (i) Prepare quarterly broker security transactions summaries; (ii) Prepare monthly security transaction listings; (iii) Supply, in the form requested, various customary Portfolio and Fund statistical data on an ongoing basis; (iv) Prepare and ensure the filing of the Funds’ annual and semi-annual reports with the SEC on Forms N-SAR and N-CSR and the Fund’s quarterly reports with the SEC on Form N-Q; (v) If mutually agreed by PNC and VP Distributors in writing, prepare (or assist in the preparation of) and ensure the filing of (or coordinate filing of, as may be mutually agreed) such other reports with the SEC as may be required by the SEC and that would be primarily fulfilled using books and records maintained by PNC under the terms of this Agreement; (vi) Assist in the preparation of registration statements and other filings relating to the registration of Shares; (vii) Monitor each Portfolio’s status as a regulated investment company under Sub-chapter M of the Internal Revenue Code of 1986, as amended (“Sub-Chapter M”); (viii) Coordinate contractual relationships and communications between the Funds and their contractual service providers; (ix) Prepare expense budgets, accrual review and expense reports as needed; (x) Provide read-only on-line access to accounting system as requested; (xi) Provide electronic transmissions of holdings, transactions, security master, general ledger, NAV, security pricing data, and cash activity as specified; (xii) Coordinate printing and mailing of annual and semi-annual financial statements; (xiii) Prepare reports for Fund Boards and attend Board meetings when and as requested; (xiv) Prepare, execute, and file each Portfolio’s Federal and state tax returns, including closed funds, and appropriate extensions after review and approval by the Fund’s independent registered public accounting firm; (xv) Prepare, execute, and file each Portfolio’s federal excise returns (Form 8613) after review and approval by the Fund’s independent registered public accounting firm; (xvi) Prepare annual tax provisions and financial tax disclosures; (xvii) Prepare tax cost for semi-annual and Form N-Q filings updated for current year-to-date wash sales and prior year known Schedule M adjustments; (xviii) Prepare dividend calculations, including accompanying analysis and earnings summary in accordance with applicable policy (as such policy is provided in writing by VP Distributors to PNC), and maintain dividend history; (xix) Prepare required disclosures for shareholder reporting, including Form 1099-DIV reporting and supporting materials such as QDI, DRD, income from U.S. Obligations, income from State obligations, income from AMT obligations, tax-exempt income, and Florida intangibles; (xx) Monitor and propose procedures as needed for tax considerations in the following areas: corporate actions, consent income, bad debt/restructurings, new instruments, premium amortization, and legislation and industry developments on an ad hoc basis; and (xxi) Prepare and deliver, to the extent available to PNC, survey information when and in the form requested.
Location of Services The Purchaser’s data shall remain within the continental United States at all times and on computing and data storage devices residing therein. Contractor’s services shall be subject to the United States legal jurisdiction.
Scope of Service Interconnection Service shall be provided to the Interconnection Customer at the Point of Interconnection (a), in the case of interconnection of the Customer Facility of a Generation Interconnection Customer, up to the Maximum Facility Output, and (b), in the case of interconnection of the Customer Facility of a Transmission Interconnection Customer, up to the Nominal Rated Capability. The location of the Point of Interconnection shall be mutually agreed by the Interconnected Entities, provided, however, that if the Interconnected Entities are unable to agree on the Point of Interconnection, the Transmission Provider shall determine the Point of Interconnection, provided that Transmission Provider shall not select a Point of Interconnection that would impose excessive costs on either of the Interconnected Entities and shall take material system reliability considerations into account in such selection. Specifications for the Customer Facility and the location of the Point of Interconnection shall be set forth in an appendix to the Interconnection Service Agreement and shall conform to those stated in the Facilities Study.
