Designated Timber Sample Clauses

Designated Timber. Cut But Not Re- moved. Standard timber shall be removed, as provided in B2.2, prior to acceptance of subdivision for comple- tion of logging and stewardship project operations un- der B6.
Sample 1Sample 2Sample 3See All (11)
Designated Timber. The estimated volume of timber to be designated for cutting is: Species and Unit Estimated Volumes
Sample 1Sample 2Sample 3See All (5)
Designated Timber. The stumpage rates to be paid during the life of this contract for timber specified in Section A7(a) shall be the bid rates shown below: PONDEROSA PINE—SAWLOGS MBF XXXXXXX-FIR AND OTHER SPECIES—SAWLOGS MBF MIXED FIR SPECIES—TONWOOD* (Gross Scale per Ton) TON FIREWOOD** TON ALL SPECIES—PULP LOGS (Removal Optional, Gross Scale per Ton)*** TON
Sample 1See All (4)
Designated Timber. SAWLOGS - The scaling provision of the Timber Contract and Standard Provisions are hereby supplemented to specify the Xxxxxxxx Decimal C Log Rule, for logs up to the maximum scaling length of 20 feet. Other scaling procedures are described by the Idaho Log Scaling Manual as amended and/or supplemented, to provide standard instructions for volume determination. Manual revisions subsequent to approval of this contract shall not be applicable to the timber covered by this contract until approved by the Approving Officer. WEIGHT SCALE - Products sold on a per ton basis shall be weighed at certified scales.
Sample 1Sample 2Sample 3
Designated Timber. (a). Insert a brief description of the method used to determine the volume of designated timber prior to the sale.
Sample 1Sample 2
Designated Timber. All timber, living or dead, which has been designated for cutting by the Bureau of Indian Affairs within the boundaries of this unit. The volume of designated timber, which has been determined as stated in A10. (a) Herein, the bid stumpage rates and the total purchase price of such designated timber are shown in the following tabulation.
Sample 1Sample 2
Designated Timber. The timber is located on the timber sale area. In accordance with Section 1, the following is designated timber, except as excluded by the section titled, "Reserved Timber": All Xxxxxxx-fir timber within the timber sale area. Boundary markings are as follows: The timber sale area is posted with "Timber Sale Boundary" signs and pink flagging. Stream buffers are posted with "Buffer Zone" boundary signs.
Sample 1
Designated Timber. The stumpage rates to be paid during the life of this contract for timber specified in Section A7(a) shall be the bid rates shown below: PONDEROSA PINE – SAWLOGS XXXXXXX-FIR AND OTHER SPECIES-SAWLOGS MIXED FIR SPECIES TONWOOD (Optional removal) PULP LOGS (Optional removal) MBF MBF TON TON $ $ $25 $2
Sample 1
Designated Timber. The timber is located on the timber sale area. In accordance with Section 1, the following is designated timber, except as excluded by the section titled, "Reserved Timber": All red alder within Areas 1, 2, 3, and 4. All timber within Area 5. All trees within “Right-of-Way Boundary” signs between the points specified in Project No. 1 in the section titled, “Project Work.” Boundary markings are as follows: The timber sale area is posted with "Timber Sale Boundary" signs, pink flagging, and red paint. The boundary between Areas 1 and 5 is posted with "Area Boundary" signs. Stream buffers within the timber sale area are posted with "Buffer Zone" signs and blue flagging. PURCHASER shall not have any red paint on the timber sale area.
Sample 1

Related to Designated Timber

  • Eligible Population 5.1 Program eligibility is determined by applicable law set forth in Program rules and the requirements established in the Program Policy Manual. 5.2 The unduplicated number of Clients for PHC services is 430. This represents the Grantee’s projected number of unduplicated Clients to be served during the Contract period. If during the Contract period it is foreseen that the Grantee might be unable to serve the contracted number of children, HHSC may reduce the Grantee’s grant award amount.

  • Estimated Number of Participating Households Approximately 6,460. This figure is based on loans with unpaid principal balances ranging from $200,000 to $400,000 with an average funding of $5,000.00.

  • Participating Consumers All Participating Consumers as of the Effective Date will continue to be enrolled in the Program under the terms of this ESA unless they opt-out. Within one (1) day after the Effective Date, the Town shall provide to Competitive Supplier a list of Participating Consumers as of the Effective Date, as well as such Participating Consumers’ service and billing addresses, and any other information necessary for Competitive Supplier to commence All-Requirements Power Supply to such Participating Consumers as of the Service Commencement Date.

  • Power Factor Design Criteria (Reactive Power A wind generating plant shall maintain a power factor within the range of 0.95 leading to 0.95 lagging, measured at the Point of Interconnection as defined in this LGIA, if the ISO’s System Reliability Impact Study shows that such a requirement is necessary to ensure safety or reliability. The power factor range standards can be met using, for example without limitation, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors if agreed to by the Connecting Transmission Owner for the Transmission District to which the wind generating plant will be interconnected, or a combination of the two. The Developer shall not disable power factor equipment while the wind plant is in operation. Wind plants shall also be able to provide sufficient dynamic voltage support in lieu of the power system stabilizer and automatic voltage regulation at the generator excitation system if the System Reliability Impact Study shows this to be required for system safety or reliability.

  • Designated Configuration; Trained Personnel State Street and the Fund shall be responsible for supplying, installing and maintaining the Designated Configuration at the Designated Locations. State Street and the Fund agree that each will engage or retain the services of trained personnel to enable both parties to perform their respective obligations under this Addendum. State Street agrees to use commercially reasonable efforts to maintain the System so that it remains serviceable, provided, however, that State Street does not guarantee or assure uninterrupted remote access use of the System.

  • Target Population TREATMENT FOR ADULT (TRA) Target Population

  • COVID-19 Vaccine Passports Pursuant to Texas Health and Safety Code, Section 161.0085(c), Contractor certifies that it does not require its customers to provide any documentation certifying the customer’s COVID-19 vaccination or post-transmission recovery on entry to, to gain access to, or to receive service from the Contractor’s business. Contractor acknowledges that such a vaccine or recovery requirement would make Contractor ineligible for a state-funded contract.

  • Alternate Billed Calls 1.1 The Parties will engage in settlements of intraLATA intrastate alternate-billed calls (e.g., collect, calling card, and third-party billed calls) originated or authorized by their respective Customers in accordance with an arrangement mutually agreed to by the Parties.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Freedom has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Freedom. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Freedom (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Freedom, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Freedom will then have the option of paying the one-time SC rates to place the Loop.

  • EPP service availability Refers to the ability of the TLD EPP servers as a group, to respond to commands from the Registry accredited Registrars, who already have credentials to the servers. The response shall include appropriate data from the Registry System. An EPP command with “EPP command RTT” 5 times higher than the corresponding SLR will be considered as unanswered. If 51% or more of the EPP testing probes see the EPP service as unavailable during a given time, the EPP service will be considered unavailable.