Techniques Framework agreement: Information about the dynamic purchasing system: No dynamic purchase system
TRADEMARK INFORMATION You herein acknowledge, understand and agree that all of xxxXxxxx Xxxxx trademarks, copyright, trade name, service marks, and other Xxxxx Xxxxx logos and any brand features, and/or product and service names are trademarks and as such, are and shall remain the property of Xxxxx Xxxxx. You herein agree not to display and/or use in any manner xxxXxxxx Xxxxx logo or marks without obtaining Xxxxx Xxxxx'x prior written consent. Xxxxx Xxxxx will always respect the intellectual property of others, and we ask that all of our users do the same. With regards to appropriate circumstances and at its sole discretion, Xxxxx Xxxxx may disable and/or terminate the accounts of any user who violates our TOS and/or infringes the rights of others. If you feel that your work has been duplicated in such a way that would constitute copyright infringement, or if you believe your intellectual property rights have been otherwise violated, you should provide to us the following information:
Patents, Licenses, Franchises and Formulas The Borrower and its Subsidiaries own or have valid licenses to use all material patents, trademarks, permits, service marks, trade names, copyrights, licenses, franchises and formulas, or rights with respect to the foregoing, and have obtained assignments of all leases and other rights of whatever nature, reasonably necessary for the present conduct of their business, without any known conflict with the rights of others except for such failures and conflicts which have not had, and could not reasonably be expected to have, either individually or in the aggregate, a Material Adverse Effect.
Processes Any employer, employee, trade union or employer’s association may at any point in time apply for an exemption from any of the provisions of this Collective Agreement. The applicant is required to complete and submit in writing with the relevant office of the Council, a fully and properly completed prescribed application for exemption form, accompanied by all relevant supporting documentation.
Description of Funding Techniques 6.2.1 The following are terms under which standard funding techniques shall be implemented for all transfers of funds to which the funding technique is applied in section 6.3.2 of this Agreement. Funding Technique Name Description Actual Clearance, ZBA - Same Day Payment The State shall request funds the same day it pays out funds, in accordance with the appropriate Federal agency cut-off time specified in Exhibit I. A Federal agency will deposit funds in a State account the same day as requested. The amount of the request shall be for the amount of funds that clear the State's account that day. This funding technique is interest neutral. Composite Clearance The State shall request funds such that they are deposited on the dollar-weighted average number of days required for funds to be paid out for a series of disbursements, in accordance with the clearance pattern specified in Exhibit II. The request shall be made in accordance with the appropriate Federal agency cut-off time specified in Exhibit I. The amount of the request shall be the sum of the payments issued in the series of disbursements. This funding technique is interest neutral. Pre-Issuance The State shall request funds such that they are deposited in a State account not more than three business days prior to the day the State makes a disbursement. The request shall be made in accordance with the appropriate Federal agency cut-off time specified in Exhibit I. The amount of the request shall be the amount the State expects to disburse. This funding technique is not interest neutral.
6.2.2 The following are terms under which funding techniques for administrative costs shall be implemented for all transfers of funds to which the funding technique is applied in section 6.3.2 of this Agreement. Funding Technique Name Description Actual Costs - Estimated Allocation - Monthly The State shall request funds once a month, such that they are deposited on the median day of the month, to fund the activity of the prior month. The request shall be made in accordance with the appropriate Federal agency cut-off time specified in Exhibit I. The amount of the request shall be an estimate based on the actual costs of the month distributed to the program according to the allocation of costs for the preceding six months. This funding technique is interest neutral.
6.2.3 The following are terms under which miscellaneous funding techniques shall be implemented for all transfers of funds to which the funding technique is applied in section 6.3.2 of this Agreement. There are currently no funding techniques listed in Section 6.2.3.
6.2.4 The following are terms under which State unique funding techniques shall be implemented for all transfers of funds to which the funding technique is applied in section 6.3.2 of this Agreement. There are currently no programs listed for Section 6.2.4.
Contract Database Metadata Elements Title: Great Neck Union Free School District and Great Neck Paraprofessionals Association (2011) Employer Name: Great Neck Union Free School District Union: Great Neck Paraprofessionals Association Local: Effective Date: 07/01/2011 Expiration Date: 06/30/2015 PERB ID Number: 5132 Unit Size: Number of Pages: 28 For additional research information and assistance, please visit the Research page of the Catherwood website - xxxx://xxx.xxx.xxxxxxx.xxx/library/research/ For additional information on the ILR School - xxxx://xxx.xxx.xxxxxxx.xxx/ ARTICLE# TITLE PAGE# Preamble 2 Article 1 Association Rights 2 Article 2 Board-Administration-Association Relationship and Procedures 4 Article 3 Exchange of Proposals 6 Article 4 Professionals Duties and Responsibilities of Paraprofessionals 7 Article 5 Work Assignments 8 Article 6 Annual Appointment 10 Article 7 Selection and Promotion 10 Article 8 Evaluations and Standards 11 Article 9 Procedures for Termination of Employment 11 Article 10 Conferences 12 Article 11 Human Resource File 12 Article 12 Professional Growth 13 Article 13 Sick Leave 14 Article 14 Personal Leave 16 Article 15 Other Leaves 17 Article 16 Grievance Procedures 18 Article 17 Legal Assistance 19 Article 18 Conformity to Law 19 Article 19 Health Insurance 20 Article 20 Retirement Plan 20 Article 21 Salary Schedule 21 Article 22 Seniority Policy 23 Article 23 Compensation for Financial Loss 24 Article 24 Duration of Agreement 25 Appendix A Determination of Negotiating Unit 25 Appendix B Payroll Deduction Authorization 26 Appendix C Bus Aides 26 Appendix D Salary Schedules 27
Other Methods of Procurement of Goods and Works The following table specifies the methods of procurement, other than International Competitive Bidding, which may be used for goods and works. The Procurement Plan shall specify the circumstances under which such methods may be used:
(a) National Competitive Bidding (b) Shopping (c) Direct Contracting
License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license.
(b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
(e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
Particular Methods of Procurement of Goods and Works International Competitive Bidding. Goods and works shall be procured under contracts awarded on the basis of International Competitive Bidding.
Trunk Types 2.2.1 In interconnecting their networks pursuant to this Attachment, the Parties will use, as appropriate, the following separate and distinct trunk groups:
2.2.1.1 Interconnection Trunks for the transmission and routing of Reciprocal Compensation Traffic, translated LEC IntraLATA toll free service access code (e.g., 800/888/877) traffic, and IntraLATA Toll Traffic, between their respective Telephone Exchange Service Customers, Tandem Transit Traffic, and, Measured Internet Traffic, all in accordance with Sections 5 through 8 of this Attachment;
2.2.1.2 Access Toll Connecting Trunks for the transmission and routing of Exchange Access traffic, including translated InterLATA toll free service access code (e.g., 800/888/877) traffic, between Ymax Telephone Exchange Service Customers and purchasers of Switched Exchange Access Service via a Verizon access Tandem in accordance with Sections 9 through 11 of this Attachment; and
2.2.1.3 Miscellaneous Trunk Groups as mutually agreed to by the Parties, including, but not limited to: (a) choke trunks for traffic congestion and testing; and, (b) untranslated IntraLATA/InterLATA toll free service access code (e.g. 800/888/877) traffic.
2.2.2 Other types of trunk groups may be used by the Parties as provided in other Attachments to this Agreement (e.g., 911/E911 Trunks) or in other separate agreements between the Parties (e.g., directory assistance trunks, operator services trunks, BLV/BLVI trunks or trunks for 500/555 traffic).
2.2.3 In accordance with the terms of this Agreement, the Parties will deploy One-Way Interconnection Trunks (trunks with traffic going in one direction, including one-way trunks and uni-directional two-way trunks) and/or Two-Way Interconnection Trunks (trunks with traffic going in both directions).
2.2.4 Ymax shall establish, at the technically feasible Point(s) of Interconnection on Verizon’s network in a LATA, separate Interconnection Trunk group(s) between such POI(s) and each Verizon Tandem in a LATA with a subtending End Office(s) to which Ymax originates calls for Verizon to terminate.
2.2.5 In the event the volume of traffic between a Verizon End Office and a technically feasible Point of Interconnection on Verizon’s network in a LATA, which is carried by a Final Tandem Interconnection Trunk group, exceeds (a) the Centium Call Seconds (Hundred Call Seconds) busy hour equivalent of one (1) DS1 at any time; (b) 200,000 minutes of use for a single month; and/or; (c) 600 busy hour Centium Call Seconds (BHCCS) of use for a single month: (i) if One-Way Interconnection Trunks are used, the originating Party shall promptly establish new or augment existing End Office One-Way Interconnection Trunk groups between the Verizon End Office and the technically feasible Point of Interconnection on Verizon’s network; or,
