Billing and Payment Procedure for Forest Products Delivered The State will compute and forward to Purchaser a billing statement of charges for forest products delivered during the billing period at the delivered rate shown in P- 028.2 clause. After receipt of the billing statement, Purchaser’s payment must be received by the Department of Natural Resources on or before the due date shown on the billing statement. Purchaser agrees to make payment, payable to the Department of Natural Resources. Failure to pay on time for forest products delivered is considered a breach of contract. Included with the billing statement will be a summary report for the billing period compiled by the State or their log and load reporting service. The State will adjust final xxxxxxxx to account for any State approved payment reductions. Advance payments made under P-045 or P-045.2 remaining on account above the value for the charges shall be returned to Purchaser within 30 days following the final report of charges. Refunds not made within the 30 day period will accrue interest at the interest rate, as established by WAC 000-000-000, computed on a daily basis until paid.
Price Adjustments for OGS Centralized Contracts Periodic price adjustments will occur no more than twice per year on a schedule to be established solely by OGS. Pricing offered shall be fixed for the first twelve (12) months of the Contract term. Such price increases will only apply to the OGS Centralized Contracts and shall not be applied retroactively to Authorized User Agreements or any Mini-bids already submitted to an Authorized User. Price decreases may be made at any time. Additionally, some price decreases shall be calculated in accordance with Appendix B, section 17, Pricing.
Loss Leader; Recycled Products Contractor shall not sell or use any article or product as a “loss leader” as defined in Section 17030 of the Business and Professions Code. If Contractor will sell to the Judicial Council, or use in the performance of this Agreement, goods specified in PCC 12207 (for example, certain paper products, office supplies, mulch, glass products, lubricating oils, plastic products, paint, antifreeze, tires and tire-derived products, and metal products), then with respect to those goods: (i) Contractor shall use recycled products in the performance of this Agreement to the maximum extent doing so is economically feasible, and (ii) upon request, Contractor shall certify in writing under penalty of perjury, the minimum, if not exact, percentage of post consumer material as defined in the PCC 12200, in such goods regardless of whether the goods meet the requirements of PCC 12209.
Certification of the Settlement Class For purposes of this Settlement only, the Parties stipulate to the certification of the Settlement Class, which is contingent upon the Court entering the Final Approval Order and Judgment of this Settlement and the occurrence of the Effective Date.
Payment for Forest Products Delivered Purchaser agrees to pay the State for delivered forest products at the following rate: $0.00/MBF $250.00/MBF for incorrect species delivery* $20/mbf for Utility logs (Adjusted Gross). Purchaser agrees to increase the above delivered payment rate as approved by the State in the event the location of delivery is changed per the G-026.2 clause. Purchaser will not be billed for any delivered logs that are scaled as containing metal. *When two or more log sorts from this project are delivered to the same destination, the species contained in them are not eligible for the species price reduction. Forest Products delivered that do not meet the sorting specifications in G-022.2 are considered mis-sorts. Purchaser receiving mis-sort Forest Products is required to pay the State at the bid price under this contract. However, when mis-sorted Forest Products amount to more than 5% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-sort threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-sort payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-sort price reduction are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-sorted will be calculated as follows: Payment Reduction = (B x M) x R M = Mis-sorted volume exceeding threshold excluding utility R = Reduction factor* 0.2 for diameter mis-sort 0.3 for high quality mis-sort *Logs eligible for payment reduction based on multiple reduction factors will be calculated at the higher payment reduction factor. Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-sort payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-sorts shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code Forest Products delivered that do not meet preferred log length specifications or multiples or combinations of preferred lengths and Forest Products delivered not meeting manufacturing standards as described in clause G-024.2 are considered mis- manufactured. Purchaser receiving mis-manufactured Forest Products is required to pay the State at the bid price under this contract. However, when mis-manufactured Forest Products amount to more than 8% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-manufacture threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-manufacture payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-manufacture price reductions are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-manufactured will be calculated as follows: Payment Reduction = (B x M) x (0.2) Where: B = Bid rate from P-028.2 clause M = Mis-manufactured volume exceeding threshold excluding utility Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-manufacture payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-manufacture shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.
Borrowing Procedures and Settlements (a) Procedure for Borrowing. Each Borrowing shall be made by an irrevocable written request by an Authorized Person delivered to Agent (which notice must be received by Agent no later than 10:00 a.m. (California time) on the Business Day prior to the date that is the requested Funding Date specifying (i) the amount of such Borrowing, and (ii) the requested Funding Date, which shall be a Business Day; provided, however, that in the case of a request for -------- ------- Swing Loan in an amount of $5,000,000, or less, such notice will be timely received if it is received by Agent no later than 10:00 a.m. (California time) on the Business Day that is the requested Funding Date) specifying (i) the amount of such Borrowing, and (ii) the requested Funding Date, which shall be a Business Day. At Agent's election, in lieu of delivering the above-described written request, any Authorized Person may give Agent telephonic notice of such request by the required time, with such telephonic notice to be confirmed in writing within 24 hours of the giving of such notice.
Product Sales Subject to Sections 10.3(c) and 10.3(d), Licensee agrees that it will not sell, offer for sale, or assist third parties (including Affiliates) in selling Product except for the sale and offer for sale of (A) TAF Product, TAF Combination Product, TDF Product and TDF Combination Product for use in the Field and in the countries of the TDF-TAF Territory, (B) COBI Product and COBI Combination Product for use in the Field and in the countries of the COBI Territory, and (C) EVG Product, EVG Combination Product and Quad Product for use in the Field and in the countries of the EVG-Quad Territory.
(i) Licensee agrees that during the period in which the Patents are valid and enforceable (on a Product-by-Product basis) it will prohibit its Distributors from selling Product (A) to any other wholesaler or distributor, (B) outside the Territory for which Licensee is licensed for sale of such Product pursuant to Section 2.2, or (C) for any purpose outside the Field.
(ii) Licensee agrees that it will not administer the TAF Quad to humans, or sell the TAF Quad until Gilead has obtained marketing approval for the TAF Quad from the FDA. Licensee agrees that it will not administer EVG to humans, or sell Products containing EVG until Gilead has obtained marketing approval for an EVG Product from the FDA. Licensee agrees that it will not administer COBI to humans, or sell Products containing COBI until Gilead has obtained marketing approval for a COBI Product from the FDA. Licensee agrees that it will not administer TAF to humans, or sell Products containing TAF until Gilead has obtained marketing approval for a TAF Product from the FDA. If Gilead obtains marketing approval from the FDA for any Quad Product or a Combination Product containing TAF, COBI or EVG (“Approved Combination Product”) prior to obtaining marketing approval for a TAF Product, EVG Product or COBI Product from the FDA, then Licensee will be allowed to administer such Quad Product or such Approved Combination Product to humans, and sell such Quad Product or such Approved Combination Product from and after the date of such marketing approval from the FDA, but will not (A) administer to humans or sell Combination Products containing EVG other than such Quad Product or such Approved Combination Product until Gilead has obtained marketing approval from the FDA for an EVG Product, or (B) administer to humans or sell Combination Products containing COBI other than such Quad Product or such Approved Combination Product until Gilead has obtained marketing approval from the FDA for a COBI Product or (C) administer to humans or sell Combination Products containing TAF other than such Quad Product or such Approved Combination Product until Gilead has obtained marketing approval from the FDA for a TAF Product.
DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.
Bidder Supplied Samples The Commissioner reserves the right to request from the Bidder/Contractor a representative sample(s) of the Product offered at any time prior to or after award of a contract. Unless otherwise instructed, samples shall be furnished within the time specified in the request. Untimely submission of a sample may constitute grounds for rejection of Bid or cancellation of the Contract. Samples must be submitted free of charge and be accompanied by the Bidder’s name and address, any descriptive literature relating to the Product and a statement indicating how and where the sample is to be returned. Where applicable, samples must be properly labeled with the appropriate Bid or Contract reference. A sample may be held by the Commissioner during the entire term of the Contract and for a reasonable period thereafter for comparison with deliveries. At the conclusion of the holding period the sample, where feasible, will be returned as instructed by the Bidder, at the Bidder’s expense and risk. Where the Bidder has failed to fully instruct the Commissioner as to the return of the sample (i.e., mode and place of return, etc.) or refuses to bear the cost of its return, the sample shall become the sole property of the receiving entity at the conclusion of the holding period.
Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.
