Common use of Dwelling Size Clause in Contracts

Dwelling Size. The minimum dwelling size for all single-family residences shall be 1,400 square feet of heated/air-conditioned space under roof plus a two-car garage with a minimum of 400 square feet. Maximum dwelling size shall be 4,600 square feet of heated/air-conditioned space under roof. The minimum lot width at building line shall be 55 feet for 55-foot wide lots and 75 feet for 75-foot wide lots with a minimum street frontage of 30 feet. Lots shall have a maximum lot coverage of 60% based on the proposed setbacks shown on the Conceptual Land Use Plan for the Project. No residential structure may exceed 35 feet in height Building design shall be in accordance with the Architectural Requirements of the Town’s LDC and will comply specifically with the design requirements of LDC Sections 4.06.02 and 4.06.03. The following principles seek to promote a high-quality development that will create a sense of place and community through the development of the site. • Housing styles, shapes and materials shall meet the Towns Land Development Regulations. • The different housing types shall be integrated architecturally in order to give the development a harmonious appearance. • The creation of visual richness shall be considered when choosing materials and details. Local characteristics are encouraged. • Side entrances for garages are encouraged. • A variety of roof heights, pitches and materials will be encouraged. • Landscaping shall be incorporated into the overall design as a means of linking the development areas with the open spaces. • Each exterior wall for a single-family home must be a minimum of two materials and a minimum of two colors. Primary facades must have one base color and a complementary wall material may be used to meet the second color requirement. • Block face restrictions may be reduced to 300 linear feet. The same house model may not be used more than three times within a single block face. For purposes of this requirement, a different house model is a different floor plan, not the same floor plan flipped in a different direction and not the same floor plan with a different exterior treatment.

Dwelling Size. The minimum dwelling size for all single-family residences shall be 1,400 1,600 square feet of heated/air-conditioned space under roof plus a two-car garage with a minimum of 400 square feet. Maximum dwelling size shall be 4,600 square feet of heated/air-conditioned space under roof. The minimum lot width at building line shall be 55 65 feet for 55-foot wide lots and 75 feet for 75-foot wide lots with a minimum street frontage of 30 feet. Lots shall have a maximum lot coverage of 60%, to include principal dwelling, all paved areas, and swimming pools, except that on a 65-foot lot the maximum lot coverage may be 70% based on the proposed setbacks shown on the Conceptual Land Use Plan for the Projectif a swimming pool is built. No residential structure may exceed 35 feet in height Building design shall be in accordance with the Architectural Requirements of the Town’s LDC and will comply specifically with the design requirements of LDC Sections 4.06.02 and 4.06.03. The following principles seek to promote a high-high quality development that will create a sense of place and community through the development of the site. • Housing styles, shapes and materials shall meet the Towns Land Development Regulations. • The different housing types shall be integrated architecturally in order to give the development a harmonious appearance. • The creation of visual richness shall be considered when choosing materials and details. Local characteristics are encouraged. • Side entrances for garages are encouraged. • A variety of roof heights, pitches and materials will be encouraged. • Landscaping shall be incorporated into the overall design as a means of linking the development areas with the open spaces. • Each exterior wall for a single-family home must be a minimum of two materials and a minimum of two colors. Primary facades must have one base color and a complementary wall material may be used to meet the second color requirement. • Block face restrictions may be reduced to 300 linear feet. The same house model may not be used more than three times within a single block face. For purposes of this requirement, a different house model is a different floor plan, not the same floor plan flipped in a different direction and not the same floor plan with a different exterior treatment.

Dwelling Size. The minimum dwelling size for all single-family residences shall be 1,400 square feet of heated/air-conditioned space under roof plus a two-car garage with a minimum of 400 square feet. Maximum dwelling size shall be 4,600 1,500 square feet of heated/air-conditioned space under roof. Maximum dwelling size shall be 4,500 square feet. The minimum lot width at building line shall be 55 50 feet for 55-foot wide lots and 75 feet for 75-foot wide lots with a minimum street frontage of 30 25 feet. Lots shall have a maximum lot coverage of 6070%, to include principal dwelling, all paved areas, and swimming pools, except that on a 100-foot lot the maximum lot coverage may be 80% based on the proposed setbacks shown on the Conceptual Land Use Plan for the Projectif a swimming pool is built. No residential structure may exceed 35 feet in height Building design shall be in accordance with the Architectural Requirements of the Town’s LDC and will comply specifically with the design requirements of LDC Sections 4.06.02 and 4.06.03. The following principles seek to promote a high-quality development that will create a sense of place and community through the development of the site. • Housing styles, shapes and materials shall meet the Towns Land Development Regulations. • The different housing types shall be integrated architecturally in order to give the development a harmonious appearance. • The creation of visual richness shall be considered when choosing materials and details. Local characteristics are encouraged. • Side entrances for garages are encouraged. • A variety of roof heights, pitches and materials will be encouraged. • Landscaping shall be incorporated into the overall design as a means of linking the development areas with the open spaces. • Each exterior wall for a single-family home must be a minimum of two materials and a minimum of two colors. Primary facades must have one base color and a complementary wall material may be used to meet the second color requirement. • Block face restrictions may be reduced to 300 linear feet. The same house model may not be used more than three times within a single block face. For purposes of this requirement, a different house model is a different floor plan, not the same floor plan flipped in a different direction and not the same floor plan with a different exterior treatment.

Dwelling Size. The minimum dwelling size for all single-family residences shall be 1,400 square feet of heated/air-conditioned space under roof plus a two-car garage with a minimum of 400 square feet. Maximum dwelling size shall be 4,600 square feet of heated/air-conditioned space under roof. The minimum lot width at building line shall be 55 feet for 55-foot wide lots and 75 feet for 75-foot wide lots with a minimum street frontage of 30 feet. Lots shall have a maximum lot coverage of 60% based on the proposed setbacks shown on the Conceptual Land Use Plan for the ProjectProject . No residential structure may exceed 35 feet in height Building design shall be in accordance with the Architectural Requirements of the Town’s LDC and will comply specifically with the design requirements of LDC Sections 4.06.02 and 4.06.03. The following principles seek to promote a high-quality development that will create a sense of place and community through the development of the site. • Housing styles, shapes and materials shall meet the Towns Land Development Regulations. • The different housing types shall be integrated architecturally in order to give the development a harmonious appearance. • The creation of visual richness shall be considered when choosing materials and details. Local characteristics are encouraged. • Side entrances for garages are encouraged. • A variety of roof heights, pitches and materials will be encouraged. • Landscaping shall be incorporated into the overall design as a means of linking the development areas with the open spaces. • Each exterior wall for a single-family home must be a minimum of two materials and a minimum of two colors. Primary facades must have one base color and a complementary wall material may be used to meet the second color requirement. • Block face restrictions may be reduced to 300 linear feet. The same house model may not be used more than three times within a single block face. For purposes of this requirement, a different house model is a different floor plan, not the same floor plan flipped in a different direction and not the same floor plan with a different exterior treatment.

Dwelling Size. The minimum dwelling size for all single-family residences shall be 1,400 1,600 square feet of heated/air-conditioned space under roof plus a two-car garage with a minimum of 400 square feet. Maximum dwelling size shall be 4,600 3,500 square feet of heated/air-conditioned space under roof. The minimum lot width at building line shall be 55 70 feet for 55-foot wide lots and 75 feet for 75-foot wide lots with a minimum street frontage of 30 feet. Lots shall have a maximum lot coverage of 60% based on the proposed setbacks shown on the Conceptual Land Use Plan for the Project%, to include principal dwelling, all paved areas, and swimming pools. No residential structure may exceed 35 feet in height height. Building design shall be in accordance with the Architectural Requirements of the Town’s LDC and will comply specifically with the design requirements of LDC Sections 4.06.02 and 4.06.03. The following principles seek to promote a high-high quality development that will create a sense of place and community through the development of the site. • Housing styles, shapes and materials shall meet the Towns Land Development Regulations. • The different housing types shall be integrated architecturally in order to give the development a harmonious appearance. • The creation of visual richness shall be considered when choosing materials and details. Local characteristics are encouraged. • Side entrances for garages are encouraged. • A variety of roof heights, pitches and materials will be encouraged. • Landscaping shall be incorporated into the overall design as a means of linking the development areas with the open spaces. • Each exterior wall for a single-family home must be a minimum of two materials and a minimum of two colors. Primary facades must have one base color and a complementary wall material may be used to meet the second color requirement. • Block face restrictions may be reduced to 300 linear feet. The same house model may not be used more than three times within a single block face. For purposes of this requirement, a different house model is a different floor plan, not the same floor plan flipped in a different direction and not the same floor plan with a different exterior treatment.

Dwelling Size. The minimum dwelling size for all single-family residences shall be 1,400 square feet of heated/air-conditioned space under roof plus a two-car garage with a minimum of 400 square feet. Maximum dwelling size shall be 4,600 square feet of heated/air-conditioned space under roof. The minimum lot width at building line shall be 55 feet for 55-foot wide lots and 75 feet for 75-foot wide lots with a minimum street frontage of 30 20 feet. Lots shall have a maximum lot coverage of 60% based on the proposed setbacks shown on the Conceptual Land Use Plan for the Project80%, to include principal dwelling, all paved areas, and swimming pools. No residential structure may exceed 35 feet in height Building design shall be in accordance with the Architectural Requirements of the Town’s LDC and will comply specifically with the design requirements of LDC Sections 4.06.02 and 4.06.03. The following principles seek to promote a high-quality development that will create a sense of place and community through the development of the site. • Housing styles, shapes and materials shall meet the Towns Land Development Regulations. • The different housing types shall be integrated architecturally in order to give the development a harmonious appearance. • The creation of visual richness shall be considered when choosing materials and details. Local characteristics are encouraged. • Side entrances for garages are encouraged. • A variety of roof heights, pitches and materials will be encouraged. • Landscaping shall be incorporated into the overall design as a means of linking the development areas with the open spaces. • Each exterior wall for a single-family home must be a minimum of two materials and a minimum of two colors. Primary facades must have one base color and a complementary wall material may be used to meet the second color requirement. • Block face restrictions may be reduced to 300 linear feet. The same house model may not be used more than three times within a single block face. For purposes of this requirement, a different house model is a different floor plan, not the same floor plan flipped in a different direction and not the same floor plan with a different exterior treatment.

Dwelling Size. The minimum dwelling size for all single-family residences shall be 1,400 1,600 square feet of heated/air-conditioned space under roof plus a two-car garage with a minimum of 400 square feet. Maximum dwelling size shall be 4,600 square feet of heated/air-conditioned space under roof. The minimum lot width at building line shall be 55 65 feet for 55-foot wide lots and 75 feet for 75-foot wide lots with a minimum street frontage of 30 feet. Lots shall have a maximum lot coverage of 60%, to include principal dwelling, all paved areas, and swimming pools, except that on a 65-foot lot the maximum lot coverage may be 70% based on the proposed setbacks shown on the Conceptual Land Use Plan for the Projectif a swimming pool is built. No residential structure may exceed 35 feet in height height. Building design shall be in accordance with the Architectural Requirements of the Town’s LDC and will comply specifically with the design requirements of LDC Sections 4.06.02 and 4.06.03. The following principles seek to promote a high-high quality development that will create a sense of place and community through the development of the site. • Housing styles, shapes and materials shall meet the Towns Land Development Regulations. • The different housing types shall be integrated architecturally in order to give the development a harmonious appearance. • The creation of visual richness shall be considered when choosing materials and details. Local characteristics are encouraged. • Side entrances for garages are encouraged. • A variety of roof heights, pitches and materials will be encouraged. • Landscaping shall be incorporated into the overall design as a means of linking the development areas with the open spaces. • Each exterior wall for a single-family home must be a minimum of two materials and a minimum of two colors. Primary facades must have one base color and a complementary wall material may be used to meet the second color requirement. • Block face restrictions may be reduced to 300 linear feet. The same house model may not be used more than three times within a single block face. For purposes of this requirement, a different house model is a different floor plan, not the same floor plan flipped in a different direction and not the same floor plan with a different exterior treatment.