Common use of E911 Service Provisioning Clause in Contracts

E911 Service Provisioning. For E911 service, Communication Services Integrated, Inc. will be required to install a minimum of two dedicated trunks originating from the Communication Services Integrated, Inc. serving wire center and terminating to the appropriate E911 tandem. The dedicated trunks shall be, at a minimum, DS-0 level trunks configured either as a 2-wire analog interface or as part of a digital (1.544 Mb/s) interface. Either configuration shall use CAMA-type signaling with multifrequency (“MF”) pulsing that will deliver automatic number identification (“ANI”) with the voice portion of the call. If the user interface is digital, MF pulses, as well as other AC signals, shall be encoded per the u-255 Law convention. Communication Services Integrated, Inc. will be required to provide BellSouth daily updates to the E911 database. Communication Services Integrated, Inc. will be required to forward 911 calls to the appropriate E911 tandem, along with ANI, based upon the current E911 end office to tandem homing arrangement as provided by BellSouth. If the E911 tandem trunks are not available, Communication Services Integrated, Inc. will be required to route the call to a designated 7-digit local number residing in the appropriate Public Service Answering Point (“PSAP”). This call will be transported over BellSouth’s interoffice network and will not carry the ANI of the calling party. Communication Services Integrated, Inc. shall be responsible for providing BellSouth with complete and accurate data for submission to the 911/E911 database for the purpose of providing 911/E911 to its end users.

E911 Service Provisioning. For E911 service, Communication Services Integrated, Inc. TCG will be required to install a minimum of two dedicated trunks originating from the Communication Services Integrated, Inc. TCG serving wire center and terminating to the appropriate E911 tandem. The Serving Wire Center must be in the same LATA as the 911 tandem. The dedicated trunks shall be, at a minimum, DS-0 level trunks configured either as a 2-wire analog interface or as part of a digital (1.544 Mb/s) interfaceinterface (DS1 facility). Either configuration shall use CAMA-type signaling with multifrequency (“MF”) pulsing or SS7/ISUP that will deliver automatic number identification (“ANI”) with the voice portion of the call. If SS7/ISUP connectivity will be used, refer to Appendix A of the E911 Local Exchange Carrier Guide for Facility Based Providers that is located on the BellSouth Interconnection website at xxxx://xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx./guides. If the user interface is digital, MF pulses, as well as other AC signals, shall be encoded per the u-255 Law convention. Communication Services Integrated, Inc. TCG will be required to provide BellSouth daily updates to the E911 database. Communication Services Integrated, Inc. TCG will be required to forward 911 calls to the appropriate E911 tandem, along with ANI, based upon the current E911 end office to tandem homing arrangement as provided by BellSouth. If the E911 tandem trunks are not available, Communication Services Integrated, Inc. TCG will be required to route the call to a designated 710-digit local number residing in the appropriate Public Service Answering Point (“PSAP”). This call will be transported over BellSouth’s interoffice network and will not carry the ANI of the calling party. Communication Services Integrated, Inc. TCG shall be responsible for providing BellSouth with complete and accurate data for submission to the 911/E911 database for the purpose of providing 911/E911 to its end users.

E911 Service Provisioning. For E911 service, Communication Services Integrated, Inc. IDS Long Distance will be required to install a minimum of two dedicated trunks originating from the Communication Services Integrated, Inc. IDS Long Distance serving wire center and terminating to the appropriate E911 tandem. The dedicated trunks shall be, at a minimum, DS-0 level trunks configured either as a 2-wire analog interface or as part of a digital (1.544 Mb/s) interface. Either configuration shall use CAMA-type signaling with multifrequency (“MF”) pulsing that will deliver automatic number identification (“ANI”) with the voice portion of the call. If the user interface is digital, MF pulses, as well as other AC signals, shall be encoded per the u-255 Law convention. Communication Services Integrated, Inc. IDS Long Distance will be required to provide BellSouth daily updates to the E911 database. Communication Services Integrated, Inc. IDS Long Distance will be required to forward 911 calls to the appropriate E911 tandem, along with ANI, based upon the current E911 end office to tandem homing arrangement as provided by BellSouth. If the E911 tandem trunks are not available, Communication Services Integrated, Inc. IDS Long Distance will be required to route the call to a designated 7-7- digit local number residing in the appropriate Public Service Answering Point (“PSAP”). This call will be transported over BellSouth’s interoffice network and will not carry the ANI of the calling party. Communication Services Integrated, Inc. IDS Long Distance shall be responsible for providing BellSouth with complete and accurate data for submission to the 911/E911 database for the purpose of providing 911/E911 to its end users.

E911 Service Provisioning. For E911 service, Communication Services Integrated, Inc. AT&T will be required to install a minimum of two dedicated trunks originating from the Communication Services Integrated, Inc. AT&T serving wire center and terminating to the appropriate E911 tandem. The Serving Wire Center must be in the same LATA as the 911 tandem. The dedicated trunks shall be, at a minimum, DS-0 level trunks configured either as a 2-wire analog interface or as part of a digital (1.544 Mb/s) interfaceinterface (DS1 facility). Either configuration shall use CAMA-type signaling with multifrequency (“MF”) pulsing or SS7/ISUP that will deliver automatic number identification (“ANI”) with the voice portion of the call. If SS7/ISUP connectivity will be used, refer to Appendix A of the E911 Local Exchange Carrier Guide for Facility Based Providers that is located on the BellSouth Interconnection website at xxxx://xxx.xxxxxxxxxxxxxxx.xxxxxxxxx.xxx./guides. If the user interface is digital, MF pulses, as well as other AC signals, shall be encoded per the u-255 Law convention. Communication Services Integrated, Inc. AT&T will be required to provide BellSouth daily updates to the E911 database. Communication Services Integrated, Inc. AT&T will be required to forward 911 calls to the appropriate E911 tandem, along with ANI, based upon the current E911 end office to tandem homing arrangement as provided by BellSouth. If the E911 tandem trunks are not available, Communication Services Integrated, Inc. AT&T will be required to route the call to a designated 710-digit local number residing in the appropriate Public Service Answering Point (“PSAP”). This call will be transported over BellSouth’s interoffice network and will not carry the ANI of the calling party. Communication Services Integrated, Inc. AT&T shall be responsible for providing BellSouth with complete and accurate data for submission to the 911/E911 database for the purpose of providing 911/E911 to its end users.