Basis for Payment DFPS is not obligated to pay unauthorized costs or to pay more than Grantee’s allowable and incurred costs consistent with 45 CFR 75, Subpart E. Grantee is responsible for submitting invoices in an accurate and timely manner for each service period and for notifying DFPS of a need to expedite payment. DFPS will make reasonable efforts to process all bills received in an accurate and timely manner but does not warrant immediate payment.
DOMESTIC PREFERENCES FOR PROCUREMENTS To the extent applicable, Supplier certifies that during the term of this Contract will comply with applicable requirements of 2 C.F.R. § 200.322.
Applications for Payment 9.3.1 At least ten days before the date for each progress payment established in the State- Contractor Agreement, the Contractor shall submit to the Architect an itemized Application for Payment, notarized if required, supported by such data substantiating the Contractor's right to payment as the State or the Architect may require. The application for payment must, at a minimum, reflect retainage and the required waivers of lien and any other support documentation enumerated elsewhere in the Contract Documents.
9.3.2 Unless otherwise provided in the Contract Documents, payments will be made on account of materials or equipment not incorporated in the Work but delivered and suitably stored at the site and, if approved in advance by the State, payments may similarly be made for materials or equipment suitably stored at some other location agreed upon in writing. Payments for materials or equipment stored on or off the site shall be conditioned upon submission by the Contractor of bills of sale or such other procedures satisfactory to the State to establish the State's title to such materials or equipment or otherwise protect the State's interest, including applicable insurance and transportation to the site for those materials and equipment stored off the site.
9.3.3 The Contractor warrants that title to all Work, materials and equipment covered by an Application for Payment will pass to the State either by incorporation in the construction or upon the receipt of payment by the Contractor, whichever occurs first, free and clear of all liens, claims, security interests or encumbrances, hereinafter referred to in this Article 9 as "liens"; and that no Work, materials or equipment covered by an Application for Payment will have been acquired by the Contractor, or by any other person performing Work at the site or furnishing materials and equipment for the Project, subject to an agreement under which an interest therein or an encumbrance thereon is retained by the seller or otherwise imposed by the Contractor or such other person.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Offices for Payments, etc So long as any of the Securities remain outstanding, the Issuer will maintain in the Borough of Manhattan, The City of New York, the following for each series: an office or agency (a) where the Securities may be presented for payment, (b) where the Securities may be presented for registration of transfer and for exchange as in this Indenture or any supplemental indenture provided and (c) where notices and demands to or upon the Issuer in respect of the Securities or of this Indenture may be served. The Issuer will give to the Trustee written notice of the location of any such office or agency and of any change of location thereof. Unless otherwise specified in accordance with Section 2.03, the Issuer hereby initially designates the Corporate Trust Office of the Trustee, as the office to be maintained by it for each such purpose. In case the Issuer shall fail to so designate or maintain any such office or agency or shall fail to give such notice of the location or of any change in the location thereof, presentations and demands may be made and notices may be served at the Corporate Trust Office. The Issuer may from time to time designate one or more additional offices or agencies where the Securities of a series may be presented for payment, where the Securities of that series may be presented for exchange as provided in this Indenture and pursuant to Section 2.03 and where the Securities of that series may be presented for registration of transfer as provided in this Indenture, and the Issuer may from time to time rescind any such designation, as the Issuer may deem desirable or expedient; provided, however, that no such designation or rescission shall in any manner relieve the Issuer of its obligation to maintain the agencies provided for in this Section. The Issuer will give to the Trustee prompt written notice of any such designation or rescission thereof.
Denominations: Provisions for Payment The Securities shall be issuable as registered Securities and in the denominations of one thousand U.S. dollars ($1,000) or any integral multiple thereof, subject to Section 2.01(a)(13). The Securities of a particular series shall bear interest payable on the dates and at the rate specified with respect to that series. Subject to Section 2.01(a)(23), the principal of and the interest on the Securities of any series, as well as any premium thereon in case of redemption or repurchase thereof prior to maturity, and any cash amount due upon conversion or exchange thereof, shall be payable in the coin or currency of the United States of America that at the time is legal tender for public and private debt, at the office or agency of the Company maintained for that purpose. Each Security shall be dated the date of its authentication. Interest on the Securities shall be computed on the basis of a 360-day year composed of twelve 30-day months. The interest installment on any Security that is payable, and is punctually paid or duly provided for, on any Interest Payment Date for Securities of that series shall be paid to the Person in whose name said Security (or one or more Predecessor Securities) is registered at the close of business on the regular record date for such interest installment. In the event that any Security of a particular series or portion thereof is called for redemption and the redemption date is subsequent to a regular record date with respect to any Interest Payment Date and prior to such Interest Payment Date, interest on such Security will be paid upon presentation and surrender of such Security as provided in Section 3.03. Any interest on any Security that is payable, but is not punctually paid or duly provided for, on any Interest Payment Date for Securities of the same series (herein called “Defaulted Interest”) shall forthwith cease to be payable to the registered holder on the relevant regular record date by virtue of having been such holder; and such Defaulted Interest shall be paid by the Company, at its election, as provided in clause (1) or clause (2) below:
(1) The Company may make payment of any Defaulted Interest on Securities to the Persons in whose names such Securities (or their respective Predecessor Securities) are registered in the Security Register at the close of business on a special record date for the payment of such Defaulted Interest, which shall be fixed in the following manner: the Company shall notify the Trustee in writing of the amount of Defaulted Interest proposed to be paid on each such Security and the date of the proposed payment, and at the same time the Company shall deposit with the Trustee an amount of money equal to the aggregate amount proposed to be paid in respect of such Defaulted Interest or shall make arrangements satisfactory to the Trustee for such deposit prior to the date of the proposed payment, such money when deposited to be held in trust for the benefit of the Persons entitled to such Defaulted Interest as in this clause provided. Thereupon the Trustee shall fix a special record date for the payment of such Defaulted Interest which shall not be more than 15 nor less than 10 days prior to the date of the proposed payment and not less than 10 days after the receipt by the Trustee of the notice of the proposed payment. The Trustee shall promptly notify the Company of such special record date and, in the name and at the expense of the Company, shall cause notice of the proposed payment of such Defaulted Interest and the special record date therefor to be sent, to each Securityholder not less than 10 days prior to such special record date. Notice of the proposed payment of such Defaulted Interest and the special record date therefor having been sent as aforesaid, such Defaulted Interest shall be paid to the Persons in whose names such Securities (or their respective Predecessor Securities) are registered in the Security Register on such special record date.
(2) The Company may make payment of any Defaulted Interest on any Securities in any other lawful manner not inconsistent with the requirements of any securities exchange on which such Securities may be listed, and upon such notice as may be required by such exchange, if, after notice given by the Company to the Trustee of the proposed payment pursuant to this clause, such manner of payment shall be deemed practicable by the Trustee. Unless otherwise set forth in a Board Resolution or one or more indentures supplemental hereto establishing the terms of any series of Securities pursuant to Section 2.01 hereof, the term “regular record date” as used in this Section with respect to a series of Securities and any Interest Payment Date for such series shall mean either the fifteenth day of the month immediately preceding the month in which an Interest Payment Date established for such series pursuant to Section 2.01 hereof shall occur, if such Interest Payment Date is the first day of a month, or the first day of the month in which an Interest Payment Date established for such series pursuant to Section 2.01 hereof shall occur, if such Interest Payment Date is the fifteenth day of a month, whether or not such date is a Business Day. Subject to the foregoing provisions of this Section, each Security of a series delivered under this Indenture upon transfer of or in exchange for or in lieu of any other Security of such series shall carry the rights to interest accrued and unpaid, and to accrue, that were carried by such other Security.
Indemnification for Expenses of a Party Who is Wholly or Partly Successful Notwithstanding any other provisions of this Agreement except for Section 27, to the extent that Indemnitee was or is, by reason of Indemnitee’s Corporate Status, a party to (or a participant in) and is successful, on the merits or otherwise, in any Proceeding or in defense of any claim, issue or matter therein, in whole or in part, the Company shall, to the fullest extent permitted by applicable law, indemnify, hold harmless and exonerate Indemnitee against all Expenses actually and reasonably incurred by him or her in connection therewith. If Indemnitee is not wholly successful in such Proceeding but is successful, on the merits or otherwise, as to one or more but less than all claims, issues or matters in such Proceeding, the Company shall, to the fullest extent permitted by applicable law, indemnify, hold harmless and exonerate Indemnitee against all Expenses actually and reasonably incurred by him or her or on his or her behalf in connection with each successfully resolved claim, issue or matter. If Indemnitee is not wholly successful in such Proceeding, the Company also shall, to the fullest extent permitted by applicable law, indemnify, hold harmless and exonerate Indemnitee against all Expenses reasonably incurred in connection with a claim, issue or matter related to any claim, issue, or matter on which Indemnitee was successful. For purposes of this Section and without limitation, the termination of any claim, issue or matter in such a Proceeding by dismissal, with or without prejudice, shall be deemed to be a successful result as to such claim, issue or matter.
Meeting to Consider Amendments ExchangeCo, at the request of Parent, shall call a meeting or meetings of the holders of the Exchangeable Shares for the purpose of considering any proposed amendment or modification requiring approval pursuant to Section 4.4 hereof. Any such meeting or meetings shall be called and held in accordance with the bylaws of ExchangeCo, the Share Provisions and all applicable laws.
Provisions for Payment The Securities shall be issuable as registered Securities and in the denominations of one thousand U.S. dollars ($1,000) or any integral multiple thereof, subject to Section 2.01(a)(13). The Securities of a particular series shall bear interest payable on the dates and at the rate specified with respect to that series. Subject to Section 2.01(a)(23), the principal of and the interest on the Securities of any series, as well as any premium thereon in case of redemption or repurchase thereof prior to maturity, and any cash amount due upon conversion or exchange thereof, shall be payable in the coin or currency of the United States of America that at the time is legal tender for public and private debt, at the office or agency of the Company maintained for that purpose. Each Security shall be dated the date of its authentication. Interest on the Securities shall be computed on the basis of a 360-day year composed of twelve 30-day months. The interest installment on any Security that is payable, and is punctually paid or duly provided for, on any Interest Payment Date for Securities of that series shall be paid to the Person in whose name said Security (or one or more Predecessor Securities) is registered at the close of business on the regular record date for such interest installment. In the event that any Security of a particular series or portion thereof is called for redemption and the redemption date is subsequent to a regular record date with respect to any Interest Payment Date and prior to such Interest Payment Date, interest on such Security will be paid upon presentation and surrender of such Security as provided in Section 3.03. Any interest on any Security that is payable, but is not punctually paid or duly provided for, on any Interest Payment Date for Securities of the same series (herein called “Defaulted Interest”) shall forthwith cease to be payable to the registered holder on the relevant regular record date by virtue of having been such holder; and such Defaulted Interest shall be paid by the Company, at its election, as provided in clause (1) or clause (2) below:
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
