FIBER CHARACTERISTICS Sample Clauses

FIBER CHARACTERISTICS. All fibers in the cable must be usable fibers and meet required specifications. Each optical fiber must consist of a doped silica core surrounded by a concentric silica cladding. The fiber must be matched clad design. Core Diameter: 8.3 µm. Cladding Diameter: 125.0 ± 1.0 µm. Core-to-Cladding Offset: < 0.8 µm. Cladding Non-Circularity: < 1.0%. Coating Diameter: 245 ±10 µm. Colored Fiber Diameter: nominal 250 µm. Attenuation Uniformity: No point discontinuity greater than 0.40 dB at 1310 nm or 0.30 dB at 1550 nm. Attenuation at the Water Peak: The attenuation at 1383 nm must not exceed 2.1 dB/km. Cutoff Wavelength: < 1260 nm Mode-Field Diameter: 9.30 ± 0.50 µm at 1310 nm, 10.50 ± 1.00 µm at 1550 nm. The coating must be a dual layered, UV-cured acrylate applied by the fiber manufacturer, and must be mechanically strippable.
AutoNDA by SimpleDocs

Related to FIBER CHARACTERISTICS

  • Pool Characteristics The Mortgage Loans in the related Mortgage Loan Package have the characteristics as set forth on Exhibit 2 to the related Assignment and Conveyance.

  • Characteristics The Contracts have the following characteristics: (i) all the Contracts are secured by Motorcycles; (ii) no Contract has a remaining maturity of more than 84 months; and (iii) the final scheduled payment on the Contract with the latest maturity is due no later than July 27, 2030. Approximately 63.90% of the Pool Balance as of the Cutoff Date is attributable to loans for purchases of new Motorcycles and approximately 36.10% is attributable to loans for purchases of used Motorcycles. No Contract was originated after the Cutoff Date. No Contract has a Contract Rate less than 0.010%.

  • Mortgage Loan Characteristics The characteristics of the related Mortgage Loan Package are as set forth on the description of the pool characteristics for the applicable Mortgage Loan Package delivered pursuant to Section 11 on the related Closing Date in the form attached as Exhibit B to each related Assignment and Conveyance Agreement;

  • ODUF Physical File Characteristics 6.2.1 ODUF will be distributed to TWTC via Secure File Transfer Protocol (FTP). The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. If AT&T determines the Secure FTP Mailbox is nearing capacity levels, AT&T may move the customer to CONNECT: Direct file delivery. 6.2.2 If the customer is moved, CONNECT: Direct data circuits (private line or dial-up) will be required between AT&T and TWTC for the purpose of data transmission. Where a dedicated line is required, TWTC will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. TWTC will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit messages successfully on an ongoing basis will be negotiated on an individual case basis. Any costs incurred for such equipment will be TWTC's responsibility. Where a dial-up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to TWTC. Additionally, all message toll charges associated with the use of the dial circuit by TWTC will be the responsibility of TWTC. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on TWTC end for the purpose of data transmission will be the responsibility of TWTC. 6.2.3 If TWTC utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of TWTC.

  • Physical File Characteristics 7.2.1 The EODUF feed will be distributed to Comcast Phone over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among Comcast Phone’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and Comcast Phone for the purpose of data transmission. Where a dedicated line is required, Comcast Phone will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Comcast Phone will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Comcast Phone. Additionally, all message toll charges associated with the use of the dial circuit by Comcast Phone will be the responsibility of Comcast Phone. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. Version 4Q01 12/01/01 All equipment, including modems and software, that is required on Comcast Phone’s end for the purpose of data transmission will be the responsibility of Comcast Phone.

  • Individual Characteristics Each Receivable has the following individual characteristics as of the Cut-Off Date: (i) each Receivable is secured by a new or used automobile, minivan or sport utility vehicle; (ii) each Receivable has an APR of no less than 0.00% and not more than 13.94; (iii) each Receivable had an original term to maturity of not more than 72 months and not less than 18 months and each Receivable has a remaining term to maturity, as of the Cut-Off Date, of 12 months or more; (iv) each Receivable has an Outstanding Principal Balance as of the Cut-Off Date of greater than or equal to $2,394.67; (v) no Receivable has a scheduled maturity date later than October 7, 2020; (vi) no Receivable was more than 30 days past due as of the Cut-Off Date; (vii) as of the Cut-off Date, no Receivable was noted in the records of VCI or the Servicer as being the subject of any pending bankruptcy or insolvency proceeding; (viii) no Receivable is subject to a force-placed Insurance Policy on the related Financed Vehicle; (ix) each Receivable is a Simple Interest Receivable; (x) each of the Receivables were selected using selection procedures that were not known or intended by VCI or the Servicer to be adverse to the Purchaser; and (xi) the Dealer of the Financed Vehicle has no participation in, or other right to receive, any proceeds of such Receivable.

  • CHARACTERISTICS OF THE ACADEMY The characteristics of the Academy set down in Section 1(6) of the Academies Act 2010, are that:

  • Characteristics of Receivables Each Receivable (A) shall have been originated in the United States by a Dealer for the retail sale of the related Financed Vehicle in the ordinary course of such Dealer’s business, shall have been fully and properly executed by the parties thereto, shall have been purchased by the Seller from such Dealer under an existing agreement with the Seller, shall have been validly assigned by such Dealer to the Seller in accordance with its terms and, to the best knowledge of the Seller, shall have been sold by a Dealer without fraud or misrepresentation, (B) shall have created or shall create a valid, subsisting and enforceable first priority security interest in favor of the Seller in the related Financed Vehicle, (C) shall contain customary and enforceable provisions such that the rights and remedies of the holder thereof shall be adequate for realization against the collateral of the benefits of the security, (D) shall provide for level Monthly Payments (provided that the first or last payment in the life of the Receivable may be minimally different from the level payment) that fully amortize the Amount Financed over its original term and shall provide for a finance charge or shall yield interest at its APR, (E) shall provide for, in the event that such Receivable is prepaid, a prepayment that fully pays the Principal Balance and includes accrued but unpaid interest at least through the date of prepayment in an amount calculated by using an interest rate at least equal to its APR, (F) shall have an Obligor that is not a federal, state or local governmental entity and (G) is a retail installment contract.

  • Switching System Hierarchy and Trunking Requirements For purposes of routing ECI traffic to Verizon, the subtending arrangements between Verizon Tandem Switches and Verizon End Office Switches shall be the same as the Tandem/End Office subtending arrangements Verizon maintains for the routing of its own or other carriers’ traffic (i.e., traffic will be routed to the appropriate Verizon Tandem subtended by the terminating End Office serving the Verizon Customer). For purposes of routing Verizon traffic to ECI, the subtending arrangements between ECI Tandem Switches and ECI End Office Switches shall be the same as the Tandem/End Office subtending arrangements that ECI maintains for the routing of its own or other carriers’ traffic.

  • Certain Characteristics of the Receivables (A) Each Receivable had a remaining maturity, as of the Cutoff Date, of not less than three (3) months and not more than eighty-four (84) months. (B) Each Receivable had an original maturity, as of the Cutoff Date, of not less than three (3) months and not more than eighty-four (84) months. (C) Each Receivable had a remaining Principal Balance, as of the Cutoff Date, of at least $250 and not more than $150,000. (D) Each Receivable had an Annual Percentage Rate, as of the Cutoff Date, of not more than 20%. (E) No Receivable was more than thirty (30) days past due as of the Cutoff Date. (F) Each Receivable arose under a Contract that is governed by the laws of the United States or any State thereof. (G) Each Obligor had a billing address in the United States or a United States territory as of the date of origination of the related Receivable. (H) Each Receivable is denominated in, and each Contract provides for payment in, United States dollars. (I) Each Receivable arose under a Contract that is assignable without the consent of, or notice to, the Obligor thereunder, and does not contain a confidentiality provision that purports to restrict the ability of the Servicer to exercise its rights under the Sale and Servicing Agreement, including, without limitation, its right to review the Contract. Each Receivable prohibits the sale or transfer of the Financed Vehicle without the consent of the Servicer. (J) Each Receivable arose under a Contract with respect to which GM Financial has performed all obligations required to be performed by it thereunder. (K) No automobile related to a Receivable was held in repossession inventory as of the Cutoff Date. (L) The Servicer’s records do not indicate that any Obligor was in bankruptcy as of the Cutoff Date. (M) No Obligor is the United States of America or any State or any agency, department, subdivision or instrumentality thereof.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!