General Operations Tenant covenants and agrees to furnish to Landlord, within thirty (30) days after receipt or modification thereof, copies of:
(a) all licenses authorizing Tenant or any Manager to operate any Facility for its Primary Intended Use;
(b) all Medicare and Medicaid certifications, together with provider agreements and all material correspondence relating thereto with respect to any Facility (excluding, however, correspondence which may be subject to any attorney client privilege);
(c) if required under Applicable Law with respect to any Facility, a license for each individual employed as administrator with respect to such Facility;
(d) all reports of surveys, statements of deficiencies, plans of correction, and all material correspondence relating thereto, including, without limitation, all reports and material correspondence concerning compliance with or enforcement of licensure, Medicare/Medicaid, and accreditation requirements, including physical environment and Life Safety Code survey reports (excluding, however, correspondence which may be subject to any attorney client privilege); and
(e) with reasonable promptness, such other confirmation as to the licensure and Medicare and Medicaid participation of Tenant as Landlord may reasonably request from time to time.
General Overview 2.1.1 If DTI requires maintenance for its local service customers, DTI will initiate a request for repair (sometimes referred to as a "trouble report") by calling GTE's Customer Care Repair Center. During this call, GTE service representatives will verify that the end-user is DTI customer and will then obtain the necessary information from DTI to process the trouble report. While DTI representatives are still on the line, GTE personnel will perform an initial analysis of the problem and remote line testing for resale services. If engineered services are involved, the call will be made to the GTE SSCC for handling. If no engineering is required and the line testing reveals that the trouble can be repaired remotely, GTE personnel will correct the problem and close the trouble report while DTI representatives are still on the line. If on-line resolution is not possible, GTE personnel will provide DTI representatives a commitment time for repair, and the GTE personnel then will enter the trouble ticket into the GTE service dispatch queue. DTI's repair service commitment times will be within the same intervals as GTE provides to its own end users. Maintenance and repair of GTE facilities is the responsibility of GTE and will be performed at no incremental charge to DTI. If, as a result of DTI-initiated trouble report, trouble is found to be the responsibility of DTI (e.g., non-network cause) GTE will charge DTI for trouble isolation. DTI will have the ability to report trouble for its end users to appropriate trouble reporting centers 24 hours a day, 7 days a week. DTI will be assigned a customer contact center when initial service agreements are made.
GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site.
Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer.
Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations.
Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage.
Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer.
Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized.
Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel.
Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations.
Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job.
Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours.
Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement.
Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.
General Obligation Except as permitted by Clause 14.2, all Confidential Information shall be held confidential during and after the continuance of this contract and shall not be divulged in any way to any third party without the prior written approval of the other party.
Your General Obligations 6.1 Full information You must give us any information we reasonably require for the purposes of this contract. The information must be correct, and you must not mislead or deceive us in relation to any information provided to us.
6.2 Updating information You must tell us promptly if information you have provided to us changes, including if your billing address changes or if your use of energy changes (for example, if you start running a business at the premises).
MAINTENANCE AND REPAIR; RULES Tenant will, at its sole expense, keep and maintain the Premises and appurtenances in good and sanitary condition and repair during the term of this Agreement and any renewal thereof. Without limiting the generality of the foregoing, Tenant shall:
(a) Not obstruct the driveways, sidewalks, courts, entry ways, stairs and/or halls, which shall be used for the purposes of ingress and egress only;
(b) Keep all windows, glass, window coverings, doors, locks and hardware in good, clean order and repair;
(c) Not obstruct or cover the windows or doors;
(d) Not leave windows or doors in an open position during any inclement weather;
(e) Not hang any laundry, clothing, sheets, etc. from any window, rail, porch or balcony nor air or dry any of same within any yard area or space;
(f) Not cause or permit any locks or hooks to be placed upon any door or window without the prior written consent of Landlord;
(g) Keep all air conditioning filters clean and free from dirt;
(h) Keep all lavatories, sinks, toilets, and all other water and plumbing apparatus in good order and repair and shall use same only for the purposes for which they were constructed. Tenant shall not allow any sweepings, rubbish, sand, rags, ashes or other substances to be thrown or deposited therein. Any damage to any such apparatus and the cost of clearing stopped plumbing resulting from misuse shall be borne by Tenant;
(i) And Tenant's family and guests shall at all times maintain order in the Premises and at all places on the Premises, and shall not make or permit any loud or improper noises, or otherwise disturb other residents;
(j) Keep all radios, television sets, stereos, phonographs, etc., turned down to a level of sound that does not annoy or interfere with other residents;
(k) Deposit all trash, garbage, rubbish or refuse in the locations provided therefor and shall not allow any trash, garbage, rubbish or refuse to be deposited or permitted to stand on the exterior of any building or within the common elements;
(l) Abide by and be bound by any and all rules and regulations affecting the Premises or the common area appurtenant thereto which may be adopted or promulgated by the Condominium or Homeowners' Association having control over them.
General Obligations 1. Each Party shall apply its measures relating to the provisions of this Chapter in accordance with Article 116 (General Principles) and, in particular, shall expeditiously apply those measures so as to avoid unduly impairing or delaying trade in goods or services or conduct of investment activities under this Agreement.
2. Nothing in this Chapter shall be construed to prevent a Party from applying measures to regulate the entry of natural persons into, or their temporary stay in, its territory, including those measures necessary to protect the integrity of, and to ensure the orderly movement of natural persons across, its borders, provided that such measures are not applied in such a manner as to unduly impair or delay trade in goods or services or conduct of investment activities under this Agreement.
Admission of New Members The Company may admit new Members (or transferees of any interests of existing Members) into the Company by the unanimous vote or consent of the Members. As a condition to the admission of a new Member, such Member shall execute and acknowledge such instruments, in form and substance satisfactory to the Company, as the Company may deem necessary or desirable to effectuate such admission and to confirm the agreement of such Member to be bound by all of the terms, covenants and conditions of this Agreement, as the same may have been amended. Such new Member shall pay all reasonable expenses in connection with such admission, including without limitation, reasonable attorneys’ fees and the cost of the preparation, filing or publication of any amendment to this Agreement or the Articles of Organization, which the Company may deem necessary or desirable in connection with such admission. No new Member shall be entitled to any retroactive allocation of income, losses, or expense deductions of the Company. The Company may make pro rata allocations of income, losses or expense deductions to a new Member for that portion of the tax year in which the Member was admitted in accordance with Section 706(d) of the Internal Revenue Code and regulations thereunder. In no event shall a new Member be admitted to the Company if such admission would be in violation of applicable Federal or State securities laws or would adversely affect the treatment of the Company as a partnership for income tax purposes. (Check if Applicable)
County Project Manager The County shall appoint a Project Manager to act as liaison with Contractor during the term of this Contract. The County’s Project Manager shall coordinate the activities of the County staff assigned to work with the Contractor.
Property Manager Any entity that has been retained to perform and carry out property rental, leasing, operation and management services at one or more of the Properties, excluding persons, entities or independent contractors retained or hired to perform facility management or other services or tasks at a particular Property.
