Goods Left Behind or Moved in Error Sample Clauses

Goods Left Behind or Moved in Error. You will ensure, to the best of Your ability, that all Goods to be removed (other than Goods being removed from store) or stored are uplifted by Us and that none is taken in error.
AutoNDA by SimpleDocs
Goods Left Behind or Moved in Error. We except no responsibility for goods/contents taken or left behind in our error. We expect the client to go through the premises at the end of the loading of the truck to ensure everything has been taken before we leave. Even if we were asked to take goods and mistakenly left them behind, it’s up to the customer to ensure they walk around the property and make sure all goods have gone on truck to be loaded by us. We except no responsibility. You will ensure all Goods to be removed or stored are uplifted by Us and that none is taken in error or left behind in error.

Related to Goods Left Behind or Moved in Error

  • CONDITIONS FOR EMERGENCY/HURRICANE OR DISASTER - TERM CONTRACTS It is hereby made a part of this Invitation for Bids that before, during and after a public emergency, disaster, hurricane, flood, or other acts of God that Orange County shall require a “first priority” basis for goods and services. It is vital and imperative that the majority of citizens are protected from any emergency situation which threatens public health and safety, as determined by the County. Contractor agrees to rent/sell/lease all goods and services to the County or other governmental entities as opposed to a private citizen, on a first priority basis. The County expects to pay contractual prices for all goods or services required during an emergency situation. Contractor shall furnish a twenty-four (24) hour phone number in the event of such an emergency.

  • Evidence Used In Evaluation The following categories of evidence shall be used in evaluating each Educator: A. Multiple measures of student learning, growth, and achievement, which shall include: i. Measures of student progress on classroom assessments that are aligned with the Massachusetts Curriculum Frameworks or other relevant frameworks and are comparable within grades or subjects in a school; ii. Common assessments of student learning, growth, and achievement related to the Massachusetts Curriculum Frameworks or the Massachusetts Vocational Technical Education Frameworks or other relevant frameworks that are comparable across grades and/or subjects district-wide. These measures may include: portfolios, approved commercial assessments and district-developed pre and post unit and course assessments, and capstone projects. iii. Measures of student progress and/or achievement toward student learning goals set between the Educator and Evaluator for the school year or some other period of time as established in the Educator Plan. iv. For Educators whose primary role is not as a classroom teacher, the appropriate measures of the Educator's contribution to student learning, growth, and achievement set by the District. The measures set by the District should be based on the Educator's role and responsibility. See rubrics in Appendix A. B. Judgments based on observations and artifacts of practice including: i. Unannounced observations which are typically at least 10 minutes. ii. Announced observation(s) for non-PTS Educators in their first year of practice in a school, PTS Educators, Educators on Improvement Plans, and as determined by the evaluator. iii. Examination of Educator work products. iv. Examination of student work samples. C. Evidence relevant to one or more Performance Standards, including but not limited to: i. Evidence compiled and presented by the Educator, including: • Evidence of fulfillment of Standard IV: Professional Culture, including, but not limited to, professional responsibilities and growth such as self-assessments, peer collaboration, professional development linked to goals in the Educator plans, contributions to the school community and professional culture; and/or other items as described under Standard IV: Professional Culture. • Evidence of fulfillment of Standard III: Family and Community Engagement, including, but not limited to active outreach to and engagement with families, for example, phone logs, newsletters, conferences, district approved applications and platforms such as websites and email correspondence and /or other items as described in Standard III: Family and Community Engagement. ii. Evidence of progress towards professional practice goal(s); iii. Evidence of progress toward student learning outcomes goal(s). iv. Student Feedback (subject to negotiations) v. Any other relevant evidence from any source that the Evaluator shares with the Educator. Other relevant evidence could include information provided by other evaluators/administrators such as the superintendent. Relevant information from other sources will be assessed by the Evaluator and information will be shared with the Educator. vi. An Educators submission of evidence to support meeting the indicators of performance for Standard I: Curriculum, Planning and Assessment and Standard II: Teaching All Students, is optional as this evidence is typically gathered by the Evaluator during a classroom observation. Submission of evidence supporting either Standards I or II can provide additional data for inclusion in the Formative or Summative Reports. If an Educator chooses to submit evidence for these categories, it is suggested that the evidence be included by the time the Summative Report will be written.

  • Particular Methods of Procurement of Goods and Works International Competitive Bidding. Goods and works shall be procured under contracts awarded on the basis of International Competitive Bidding.

  • No Additional Work or Material No claim for additional services, not specifically provided in this contract, performed or furnished by the contractor, will be allowed, nor may the contractor do any work or furnish any material not covered by the contract unless the work or material is ordered in writing by the Project Director and approved by the Agency Head.

  • CERTIFICATION OF NO ASBESTOS CONTAINING MATERIALS OR WORK 8.1 The Contractor shall be responsible for ensuring that no asbestos containing materials or work is included within the scope of the Work. The Contractor shall take whatever measures it deems necessary to insure that all employees, suppliers, fabricators, material men, subcontractors, or their assigns, comply with this requirement. 8.2 The Contractor shall ensure that Texas Department of Health licensed individuals, consultants or companies are used for any required asbestos work including asbestos inspection, asbestos abatement plans/specifications, asbestos abatement, asbestos project management and third-party asbestos monitoring.

  • Material Changes; Undisclosed Events, Liabilities or Developments Since the date of the latest audited financial statements included within the SEC Reports, except as set forth on Schedule 3.1(i), (i) there has been no event, occurrence or development that has had or that could reasonably be expected to result in a Material Adverse Effect, (ii) the Company has not incurred any liabilities (contingent or otherwise) other than (A) trade payables and accrued expenses incurred in the ordinary course of business consistent with past practice and (B) liabilities not required to be reflected in the Company’s financial statements pursuant to GAAP or disclosed in filings made with the Commission, (iii) the Company has not altered its method of accounting, (iv) the Company has not declared or made any dividend or distribution of cash or other property to its stockholders or purchased, redeemed or made any agreements to purchase or redeem any shares of its capital stock and (v) the Company has not issued any equity securities to any officer, director or Affiliate, except pursuant to existing Company stock option plans. The Company does not have pending before the Commission any request for confidential treatment of information. Except for the issuance of the Securities contemplated by this Agreement or as set forth on Schedule 3.1(i), no event, liability, fact, circumstance, occurrence or development has occurred or exists or is reasonably expected to occur or exist with respect to the Company or its Subsidiaries or their respective businesses, prospects, properties, operations, assets or financial condition that would be required to be disclosed by the Company under applicable securities laws at the time this representation is made or deemed made that has not been publicly disclosed at least 1 Trading Day prior to the date that this representation is made.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Random Testing Notwithstanding any provisions of the Collective Agreement or any special agreements appended thereto, section 4.6 of the Canadian Model will not be applied by agreement. If applied to a worker dispatched by the Union, it will be applied or deemed to be applied unilaterally by the Employer. The Union retains the right to grieve the legality of any imposition of random testing in accordance with the Grievance Procedure set out in this Collective Agreement.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

  • Goods, Standards and Appurtenances Any Goods delivered must be standard new Goods, latest model, except as otherwise specifically stated in the Contract. Remanufactured, refurbished or reconditioned equipment may be accepted but only to the extent allowed under the Contract. Where the Contract does not specifically list or describe any parts or nominal appurtenances of equipment for the Goods, it shall be understood that the Contractor shall deliver such equipment and appurtenances as are usually provided with the manufacturer's stock model.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!