Common use of Hardware Control Pins Clause in Contracts

Hardware Control Pins. The CFP2 Module supports real-time control functions via hardware pins, listed in Table 2-1. Specifications of the CFP2 hardware control pins are given in Ref. [1], with the following changes listed below. Table 2-1: Control Pins Pin # Symbol Description I/O Logic “H” “L” Pull-up /down Programmable Control 1 17 PRG_CNTL1 MSA Default: TRXIC_RSTn, TX & RX ICs reset, I 3.3V LVCMOS Pull – Up2 "0": reset, "1"or NC: enabled per CFP MSA MIS Ref. [7] 18 PRG_CNTL2 Programmable Control 2 MSA Default: Hardware Interlock LSB I 3.3V LVCMOS Pull – Up2 19 PRG_CNTL3 Programmable Control 3 MSA Default: Hardware Interlock MSB I 3.3V LVCMOS Pull – Up2 24 TX_DIS Transmitter Disable I 3.3V LVCMOS Disable Enable Pull – Up2 26 MOD_LOPWR Module Low Power Mode I 3.3V LVCMOS Low Power Enable Pull – Up2 28 MOD_RSTn Module Reset, Active Low (invert) I 3.3V LVCMOS Enable Reset Pull – Down3 2Pull-Up resistor (4.7 kOhm to 10 kOhm) is located within the CFP2 module 3Pull-Down resistor (4.7 kOhm to 10 kOhm) is located within the CFP2 module

Hardware Control Pins. The CFP2 Module supports real-time control functions via hardware pins, listed in Table 2-1. Specifications of the CFP2 hardware control pins are given in Ref. [1], with the following changes listed below. Table 2-1: Control Pins Pin # Symbol Description I/O Logic “H” “L” ³H´ ³L´ Pull-up /down Programmable Control 1 17 PRG_CNTL1 MSA Default: TRXIC_RSTn, TX & RX ICs reset, I 3.3V LVCMOS Pull – Up2 ±Up2 "0": reset, "1"or NC: enabled per CFP MSA MIS Ref. [7] 18 PRG_CNTL2 Programmable Control 2 MSA Default: Hardware Interlock LSB I 3.3V LVCMOS Pull – Up2 ±Up2 19 PRG_CNTL3 Programmable Control 3 MSA Default: Hardware Interlock MSB I 3.3V LVCMOS Pull – Up2 ±Up2 24 TX_DIS Transmitter Disable I 3.3V LVCMOS Disable Enable Pull – Up2 ±Up2 26 MOD_LOPWR Module Low Power Mode I 3.3V LVCMOS Low Power Enable Pull – Up2 ±Up2 28 MOD_RSTn Module Reset, Active Low (invert) I 3.3V LVCMOS Enable Reset Pull – ± Down3 2Pull-Up resistor (4.7 kOhm to 10 kOhm) is located within the CFP2 module 3Pull-Down resistor (4.7 kOhm to 10 kOhm) is located within the CFP2 module