Indications of Source and Country Names Sample Clauses

Indications of Source and Country Names. 1. The Parties shall ensure in their national laws adequate and effective means to protect indications of source, country names and flags, with regard to all goods and services. 2. For the purposes of this Agreement, “indications of source” are direct or indirect references to the geographical origin of goods or services. 3. With regard to the use of indications of source for goods or services, the Parties shall provide in their national laws for adequate and effective means to prevent the use of such indications for goods or services not originating in the place indicated by the designation in question. 4. The Parties shall provide the legal means for interested parties to prevent any incorrect or misleading use or registration of country names of a Party as trademarks, company names or names of associations. 5. The Parties shall provide the legal means for interested parties to prevent that armorial bearings, flags and other State emblems of a Party are used or registered as trademarks, or as company names or names of associations, in non-compliance with the conditions laid down in the laws and regulations of that Party. This protection shall also apply to signs that may be confused with armorial bearings, flags and other State emblems of the Parties.
AutoNDA by SimpleDocs

Related to Indications of Source and Country Names

  • Business Names Other than its full corporate name, Borrower has not conducted business using any trade names or fictitious business names except as shown on the Supplement.

  • Country and Territory Names The country and territory names (including their IDN variants, where applicable) contained in the following internationally recognized lists shall be withheld from registration or allocated to Registry Operator at All Levels: the short form (in English) of all country and territory names contained on the ISO 3166-1 list, as updated from time to time, including the European Union, which is exceptionally reserved on the ISO 3166-1 list, and its scope extended in August 1999 to any application needing to represent the name European Union <xxxx://xxx.xxx.xxx/iso/support/country_codes/iso_3166_code_lists/iso-3166-1_decoding_table.htm>; the United Nations Group of Experts on Geographical Names, Technical Reference Manual for the Standardization of Geographical Names, Part III Names of Countries of the World; and the list of United Nations member states in 6 official United Nations languages prepared by the Working Group on Country Names of the United Nations Conference on the Standardization of Geographical Names; provided, that the reservation of specific country and territory names (including their IDN variants according to the registry operator IDN registration policy, where applicable) may be released to the extent that Registry Operator reaches agreement with the applicable government(s). Registry Operator must not activate such names in the DNS; provided, that Registry Operator may propose the release of these reservations, subject to review by ICANN’s Governmental Advisory Committee and approval by ICANN. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD, all such names that remain withheld from registration or allocated to Registry Operator shall be transferred as specified by ICANN. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement.

  • Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).

  • Sublicense to Use the Scudder Trademarks As exclusive licensee of the rights to use anx xxxxxcense the use of the "Scudder," "Scudder Investments" and "Scudder, Stevens & Clark, Inx." xxxdemaxxx (xxgether, the "Scuddex Xxxxx"), xxx xerexx xxant the Trust a nonexclusive right xxx xxxlicense to use (i) the "Scudder" name and mark as part of the Trust's name (the "Fund Namx"), xxd (ii) the Scudder Marks in connection with the Trust's investment products xxx xxxvices, in each case only for so long as this Agreement, any other investment management agreement between you or any organization which shall have succeeded to your business as investment manager ("your Successor") and the Trust, or any extension, renewal or amendment hereof or thereof remains in effect, and only for so long as you are a licensee of the Scudder Marks, provided however, that you agree to use your best xxxxxxx to maintain your license to use and sublicense the Scudder Marks. The Trust agrees that it shall have no right to suxxxxxxxe or assign rights to use the Scudder Marks, shall acquire no interest in the Scudder Marks othxx xxxx the rights granted herein, that all of txx Xxxxt's uses of the Scudder Marks shall inure to the benefit of Scudder Trust Company xx xxxer and licensor of the Scudder Marks (xxx "Xrademark Owner"), and that the Trust shall nxx xxxxlenge the validity of the Scudder Marks or the Trademark Owner's ownership thereof. The Truxx xxxxher agrees that all services and products it offers in connection with the Scudder Marks shall meet commercially reasonable standards of duaxxxx, xs may be determined by you or the Trademark Owner from time to time, provided that you acknowledge that the services and products the Trust rendered during the one-year period preceding the date of this Agreement are acceptable. At your reasonable request, the Trust shall cooperate with you and the Trademark Owner and shall execute and deliver any and all documents necessary to maintain and protect (including but not limited to in connection with any trademark infringement action) the Scudder Marks and/or enter the Trust as a registered user thereof. Xx xxch time as this Agreement or any other investment management agreement shall no longer be in effect between you (or your Successor) and the Trust, or you no longer are a licensee of the Scudder Marks, the Trust shall (to the extent that, and as soon ax, xx xawfully can) cease to use the Fund Name or any other name indicating that it is advised by, managed by or otherwise connected with you (or your Successor) or the Trademark Owner. In no event shall the Trust use the Scudder Marks or any other name or mark confusingly similar therexx (xxxluding, but not limited to, any name or mark that includes the name "Scudder") if this Agreement or any other investment advisory agrexxxxx xetween you (or your Successor) and the Fund is terminated.

  • License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.

  • Trade Names No party shall use any other party's names, logos, trademarks or service marks, whether registered or unregistered, without the prior written consent of such other party, or after written consent therefor has been revoked. The Company shall not use in advertising, publicity or otherwise the name of the Trust, Distributor, or any of their affiliates nor any trade name, trademark, trade device, service xxxx, symbol or any abbreviation, contraction or simulation thereof of the Trust, Distributor, or their affiliates without the prior written consent of the Trust or the Distributor in each instance.

  • Products and Services General Information

  • Other Products and Services As our customer, you have access to a suite of financial products and services availed by ourselves, our affiliates and strategic partners designed to help you address and achieve your financial needs and goals. You agree that you can obtain information about such Products and Services via our website xxx.xxxxxxxx.xxx.xx and you further agree that we can from time to time communicate information in relation to such Products or Services to you specifically or generally to all cardmembers via such communication mode as we consider appropriate.

  • USE OF NASA NAME AND NASA EMBLEMS A. NASA Name and Initials Partner shall not use "National Aeronautics and Space Administration" or "NASA" in a way that creates the impression that a product or service has the authorization, support, sponsorship, or endorsement of NASA, which does not, in fact, exist. Except for releases under the "Release of General Information to the Public and Media" Article, Partner must submit any proposed public use of the NASA name or initials (including press releases and all promotional and advertising use) to the NASA Associate Administrator for the Office of Communications or designee ("NASA Communications") for review and approval. Approval by NASA Office of Communications shall be based on applicable law and policy governing the use of the NASA name and initials. B. NASA Emblems Use of NASA emblems (i.e., NASA Seal, NASA Insignia, NASA logotype, NASA Program Identifiers, and the NASA Flag) is governed by 14 C.F.R. Part 1221. Partner must submit any proposed use of the emblems to NASA Communications for review and approval.

  • Trade Names and Trademarks No Issuer Entity may use any company name, trade name, trademark or service xxxx or logo of Ameriprise or any person or entity controlling, controlled by, or under common control with Ameriprise without Ameriprise’s prior written consent.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!