Terms of Use The Clean Energy Council Limited (CEC) owns all intellectual property rights in the Solar PV Sale and Installation Agreement (Agreement).
Changes to the Terms of Use We may revise and update these Terms of Use from time to time in our sole discretion. All changes are effective immediately when we post them, and apply to all access to and use of the Website thereafter. However, any changes to the dispute resolution provisions set out in Governing Law and Jurisdiction will not apply to any disputes for which the parties have actual notice on or before the date the change is posted on the Website. Your continued use of the Website following the posting of revised Terms of Use means that you accept and agree to the changes. You are expected to check this page from time to time, so you are aware of any changes, as they are binding on you.
Effective Date and Term of Agreement This Agreement is effective and binding on the Company and Employee as of the date hereof; provided, however, that, subject to Section 2(d), the provisions of Sections 3 and 4 shall become operative only upon the Change in Control Date.
TERMS OF LICENSE The terms and conditions set forth in the Contract that are in effect and applicable to a Purchase Order at the time of order placement. kk. THIRD-PARTY SOFTWARE Any software that is developed independently of Contractor and which may be governed by a separate license.
Amendment of Terms of Rights The terms of the Rights and the Rights Agreement may be amended in any respect without the consent of the Rights holders on or prior to the Distribution Date; thereafter, the terms of the Rights and the Rights Agreement may be amended without the consent of the Rights holders in order to cure any ambiguities or to make changes which do not adversely affect the interests of Rights holders (other than the Acquiring Person).
Specific Provisions for Access Rights to Software For the avoidance of doubt, the general provisions for Access Rights provided for in this Section 9 are applicable also to Software. Parties’ Access Rights to Software do not include any right to receive source code or object code ported to a certain hardware platform or any right to receive respective Software documentation in any particular form or detail, but only as available from the Party granting the Access Rights.
Issuance and Terms of Equipment Notes The Equipment Notes shall be dated the date of issuance thereof, shall be issued in three separate series consisting of Series A, Series B and Series C and in the maturities and principal amounts and shall bear interest as specified in Schedule I hereto. On the date of the consummation of the Transactions, each Equipment Note shall be issued to the Subordination Agent on behalf of the Pass Through Trustees under the Pass Through Trust Agreements. The Equipment Notes shall be issued in registered form only. The Equipment Notes shall be issued in denominations of $1,000 and integral multiples thereof, except that one Equipment Note of each Series may be in an amount that is not an integral multiple of $1,000. Each Equipment Note shall bear interest at the Debt Rate (calculated on the basis of a year of 360 days comprised of twelve 30-day months) on the unpaid Original Amount thereof from time to time outstanding, payable in arrears on April 1, 1998, and on each October 1 and April 1 thereafter until maturity. The Original Amount of each Equipment Note shall be payable on the dates and in the installments equal to the corresponding percentage of the Original Amount as set forth in Schedule I hereto which shall be attached as Schedule I to the Equipment Notes. Notwithstanding the foregoing, the final payment made under each Equipment Note shall be in an amount sufficient to discharge in full the unpaid Original Amount and all accrued and unpaid interest on, and any other amounts due under, such Equipment Note. Each Equipment Note shall bear interest at the Payment Due Rate (calculated on the basis of a year of 360 days comprised of twelve 30-day months) on any part of the Original Amount, Make-Whole Amount, if any, and, to the extent permitted by applicable Law, interest and any other amounts payable thereunder not paid when due for any period during which the same shall be overdue, in each case for the period the same is overdue. Amounts shall be overdue if not paid when due (whether at stated maturity, by acceleration or otherwise). Notwithstanding anything to the contrary contained herein, if any date on which a payment under any Equipment Note becomes due and payable is not a Business Day then such payment shall not be made on such scheduled date but shall be made on the next succeeding Business Day and if such payment is made on such next succeeding Business Day, no interest shall accrue on the amount of such payment during such extension.
Publicity; Terms of Agreement (a) The Parties agree that the material terms of this Agreement are the Confidential Information of both Parties, subject to the special authorized disclosure provisions set forth in Section 12.2 and this Section 12.3. The Parties have agreed to make a joint public announcement of the execution of this Agreement substantially in the form of the press release attached as Exhibit F on or after the Effective Date.
(b) After issuance of such joint press release, if either Party desires to make a public announcement concerning the material terms of this Agreement, such Party shall give reasonable prior advance notice of the proposed text of such announcement to the other Party for its prior review and approval (except as otherwise provided herein), such approval not to be unreasonably withheld, except that in the case of a press release or governmental filing required by Applicable Law (where reasonably advised by the disclosing Party’s counsel), the disclosing Party shall provide the other Party with such advance notice as it reasonably can and shall not be required to obtain approval therefor. A Party commenting on such a proposed press release shall provide its comments, if any, within five (5) Business Days (or within three (3) Business Days in the event that Ambrx (or its Affiliate) is a public reporting company) after receiving the press release for review and the other Party shall give good faith consideration to same. Ambrx shall have the right to make a press release announcing the achievement of each milestone under this Agreement as it is achieved, and the achievements of Regulatory Approvals as they occur, subject only to the review procedure set forth in the preceding sentence. In relation to BMS’ review of such an announcement, BMS may make specific, reasonable comments on such proposed press release within the prescribed time for commentary, but shall not withhold its consent to disclosure of the information that the relevant milestone or Regulatory Approval has been achieved and triggered a payment hereunder. Neither Party shall be required to seek the permission of the other Party to repeat any information regarding the terms of this Agreement that have previously been publicly disclosed by such Party, or by the other Party, in accordance with this Section 12.3. For clarity, neither Party shall disclose the financial terms of this Agreement without the prior written approval of the other Party, except as and to the extent otherwise expressly permitted under this Agreement.
(c) The Parties acknowledge that either or both Parties may be obligated to file under Applicable Law a copy of this Agreement with the SEC or other Government Authorities. Each Party shall be entitled to make such a required filing, provided that it requests confidential treatment of at least the financial terms and sensitive technical terms hereof and thereof to the extent such confidential treatment is reasonably available to such Party. In the event of any such filing, each Party will provide the other Party with a copy of this Agreement marked to show provisions for which such Party intends to seek confidential treatment not less than five (5) Business Days prior to such filing (and any revisions to such portions of the proposed filing a reasonable time prior to the filing thereof), and shall reasonably consider the other Party’s comments thereon to the extent consistent with the legal requirements, with respect to the filing Party, governing disclosure of material agreements and material information that must be publicly filed, and shall only disclose Confidential Information which it is advised by counsel or the applicable Governmental Authority is legally required to be disclosed. No such notice shall be required under this Section 12.3(c) if the substance of the description of or reference to this Agreement contained in the proposed filing has been included in any previous filing made by either Party hereunder or otherwise approved by the other Party.
(d) Each Party shall require each of its Affiliates and private investors to which Confidential Information of the other Party is disclosed as permitted hereunder to comply with the covenants and restrictions set forth in Sections 12.1 through Section 12.3 as if each such Affiliate and each such investor were a Party to this Agreement and shall be fully responsible for any breach of such covenants and restrictions by any such Affiliate or investor.
Access to NID 2.7.3.1 NewPhone may access the customer’s premises wiring by any of the following means and NewPhone shall not disturb the existing form of electrical protection and shall maintain the physical integrity of the NID:
2.7.3.1.1 BellSouth shall allow NewPhone to connect its Loops directly to BellSouth’s multi-line residential NID enclosures that have additional space and are not used by BellSouth or any other telecommunications carriers to provide service to the premises;
2.7.3.1.2 Where an adequate length of the customer’s premises wiring is present and environmental conditions permit, either Party may remove the customer premises wiring from the other Party’s NID and connect such wiring to that Party’s own NID;
2.7.3.1.3 Either Party may enter the subscriber access chamber or dual chamber NID enclosures for the purpose of extending a cross-connect or spliced jumper wire from the customer premises wiring through a suitable “punch-out” hole of such NID enclosures; or
2.7.3.1.4 NewPhone may request BellSouth to make other rearrangements to the customer premises wiring terminations or terminal enclosure on a time and materials cost basis.
2.7.3.2 In no case shall either Party remove or disconnect the other Party’s loop facilities from either Party’s NIDs, enclosures, or protectors unless the applicable Commission has expressly permitted the same and the disconnecting Party provides prior notice to the other Party. In such cases, it shall be the responsibility of the Party disconnecting loop facilities to leave undisturbed the existing form of electrical protection and to maintain the physical integrity of the NID. It will be NewPhone’s responsibility to ensure there is no safety hazard, and NewPhone will hold BellSouth harmless for any liability associated with the removal of the BellSouth Loop from the BellSouth NID. Furthermore, it shall be the responsibility of the disconnecting Party, once the other Party’s loop has been disconnected from the NID, to reconnect the disconnected loop to a nationally recognized testing laboratory listed station protector, which has been grounded as per Article 800 of the National Electrical Code. If no spare station protector exists in the NID, the disconnected loop must be appropriately cleared, capped and stored.
2.7.3.3 NewPhone shall not remove or disconnect ground wires from BellSouth’s NIDs, enclosures, or protectors.
2.7.3.4 NewPhone shall not remove or disconnect NID modules, protectors, or terminals from BellSouth’s NID enclosures.
2.7.3.5 Due to the wide variety of NID enclosures and outside plant environments, BellSouth will work with NewPhone to develop specific procedures to establish the most effective means of implementing this section if the procedures set forth herein do not apply to the NID in question.
Use of Attachment Facilities by Third Parties Purpose of Attachment Facilities. Except as may be required by Applicable Laws and Regulations, or as otherwise agreed to among the Parties, the Attachment Facilities shall be constructed for the sole purpose of interconnecting the Large Generating Facility to the New York State Transmission System and shall be used for no other purpose.
