Initial Disbursement Conditions Sample Clauses

Initial Disbursement Conditions. Prior to the Initial Disbursement the following conditions shall have been satisfied, in addition to those in Article IV: 5.1.1 Recordation of the Trust Deed, the Regulatory Agreement, the [City Subordination Agreement, and the County Subordination Agreement, and memorandum of the Ground Lease] shall have occurred. 5.1.2 There shall exist no Event of Default, as defined in this Borrower Loan Agreement, or Event of Default as defined in any of the other Borrower Loan Documents or event, omission or failure of condition which would constitute an Event of Default after notice or lapse of time, or both, and no breach of the Project Document, the Partnership Agreement, or the LIHTC Documents. 5.1.3 Title Insurer shall have issued or agreed to issue the Title Policy described in Section 8.2 hereof, naming Funding Lender as insured to the extent of the Borrower Loan Amount.
AutoNDA by SimpleDocs

Related to Initial Disbursement Conditions

  • Payment Conditions The price of the whole accommodation service booked is always payable by the Guest in advance, at the latest upon arrival in the hotel. Set-off by the Guest is excluded unless the set- off relates to an undisputed or legally confirmed claim. Valid means of payment are cash in Euros, EC card, Master Card, Visa Card, Diners Card and American Express. For payment settlement we use the 3D Secure 2.0 system for secure and additional customer authorisation. For further information on data processing for payment transactions see xxxxx://xxx.xxxxx-xxx.xxx/en/data-privacy/.

  • ADDITIONAL SPECIAL CONTRACT CONDITIONS Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:

  • Termination Conditions Such license shall not be terminated or its exploitation enjoined, until and unless: (i) Hitachi has committed a material breach of its obligations under this IP License Agreement, Opto-Device has given written notice of such breach to Hitachi and such breach remains uncured after the Cure Period, or, in the case of a breach, which cannot be cured within such Cure Period, Hitachi has not instituted within such Cure Period steps necessary to remedy the default and/or thereafter has not diligently pursued the same to completion; or (ii) such a material breach is incurable. In the event the breach is a curable breach that cannot be cured within the Cure Period but with respect to which Hitachi has instituted steps necessary to remedy the default and is thereafter diligently pursuing such cure, both parties shall negotiate to determine whether further pursuit of such cure is reasonable. If the parties cannot agree on a resolution in such negotiations, then this issue shall be referred to arbitration pursuant to the arbitration procedures set forth in Exhibit B hereto to decide whether such breach can be cured or any other alternative remedy should be adopted. In the event the breach is an incurable breach, the parties agree that the matter shall be referred to arbitration pursuant to the arbitration procedures set forth in Exhibit B hereto to determine the appropriate remedy. In the event that either party submits the dispute to arbitration, both parties shall cooperate in such binding arbitration in accordance with Exhibit B.

  • Funding Date (A) If the Hotspot Acquisition is consummated on the Funding Date, the obligations of the B-1 Term Loan Lenders and the Incremental B-2 Term Loan Lenders, respectively, to make such Borrowings, are subject to the satisfaction (or waiver by the Administrative Agent) of following conditions precedent: (a) The Acquisition shall have been consummated in all material respects in accordance with the terms of the Purchase Agreement. (b) The Specified Purchase Agreement Representations shall be true and correct in all material respects and the Specified Representations shall be true and correct in all material respects (except in the case of any Specified Purchase Agreement Representation or any Specified Representation which expressly relates to a given date or period, such representation and warranty shall be true and correct in all material respects as of the respective date or for the respective period, as the case may be). (c) After giving effect to the application of the proceeds of the Term B-1 Term Loans and the Incremental B-2 Term Loans, the Target and its subsidiaries shall have outstanding no third-party indebtedness for borrowed money, other than indebtedness permitted to be outstanding under this Agreement. The Administrative Agent shall have received reasonably satisfactory evidence of repayment of all indebtedness to be repaid on the Funding Date and of the discharge of all indebtedness and liens other than indebtedness and liens permitted to remain outstanding under this Agreement (or customary arrangements for such repayment or discharge shall have been made). (d) The (i) Borrower shall have paid the Amendment Fees (as defined the Amendment) and (ii) Administrative Agent shall have received all fees (including the Funding Fees) and other amounts due and payable by any Loan Party on or prior to the Funding Date, including, to the extent invoiced at least three (3) business days prior to the Funding Date., reimbursement or payment of all reasonable out-of-pocket expenses (including fees, charges and disbursements of counsel) required to be reimbursed or paid by the Borrower under the JPM Fee Letter and any Loan Document. (e) Since September 30, 2014, the Acquired Business and its Transferred Subsidiaries (as defined in the Acquisition Agreement), taken as a whole, have not suffered any adverse change to their respective businesses, assets, operations or financial position, except such changes which have not had, individually or in the aggregate, a Company Material Adverse Effect. For purposes of this clause (e), “Company Material Adverse Effect” shall have the meaning set forth in the Purchase Agreement.

  • Monthly Disbursements On or before the fifth (5th) day of each calendar month, during the design and construction of the Tenant Improvements (or such other date as Landlord may designate), Tenant shall deliver to Landlord: (i) a request for reimbursement of amounts paid to the “Contractor,” as that term is defined in Section 4.1.1 of this Tenant Work Letter, approved by Tenant, in a commercially reasonable form to be provided by Landlord, showing the schedule, by trade, of percentage of completion of the Tenant Improvements in the Premises, detailing the portion of the work completed and the portion not completed; (ii) invoices from all of “Tenant’s Agents,” as that term is defined in Section 4.1.2 of this Tenant Work Letter, for labor rendered and materials for the Premises; (iii) executed mechanic’s lien releases, as applicable, from all of Tenant’s Agents which shall comply with the appropriate provisions, as reasonably determined by Landlord, of California Civil Code Section 3262(d); and (iv) all other information reasonably requested by Landlord. Tenant’s request for payment shall be deemed Tenant’s acceptance and approval of the work furnished and/or the materials supplied as set forth in Tenant’s payment request. Within forty-five (45) days thereafter, Landlord shall deliver a check to Tenant made payable to Tenant in payment of the lesser of: (A) the amounts so requested by “tenant as set forth in this Section 2.2.3.1, above (or, subject to the terms of Section 4.2.1, below, a percentage thereof), and (B) the balance of any remaining available portion of the Tenant Improvement Allowance, provided that Landlord does not dispute any request for payment based on non-compliance of any work with the “Approved Working Drawings,” as that term is defined in Section 3.5 below, or due to any substandard work. Landlord’s payment of such amounts shall not be deemed Landlord’s approval or acceptance of the work furnished or materials supplied as set forth in Tenant’s payment request.

  • Conditions Precedent to the Initial Extension of Credit The obligation of each Lender to make the initial extensions of credit provided for hereunder is subject to the fulfillment, to the satisfaction of Agent and each Lender, of each of the conditions precedent set forth on Schedule 3.1 to this Agreement (the making of such initial extensions of credit by a Lender being conclusively deemed to be its satisfaction or waiver of the conditions precedent).

  • Conditions to Closing and Initial Extensions of Credit The obligation of the Lenders to close this Agreement and to make the initial Loan or issue or participate in the initial Letter of Credit, if any, is subject to the satisfaction of each of the following conditions:

  • Conditions Precedent to Disbursement Agency’s obligation to disburse Grant Funds to Grantee under this Grant is subject to satisfaction of each of the following conditions precedent: 7.2.1 Agency has received sufficient funding, appropriations, expenditure limitation, allotments or other necessary expenditure authorizations to allow Agency, in the exercise of its reasonable administrative discretion, to make the disbursement from the Funding Source; 7.2.2 No default as described in Section 15 has occurred; and 7.2.3 Grantee’s representations and warranties set forth in Section 8 are true and correct on the date of disbursement(s) with the same effect as though made on the date of disbursement.

  • Loan Commitment Disbursement to Borrower Except as expressly and specifically set forth herein, Lender has no obligation or other commitment to loan any funds to Borrower or otherwise make disbursements to Borrower. Borrower hereby waives any right Borrower may have to make any claim to the contrary.

  • Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!