Interim and Final True-Ups Sample Clauses

Interim and Final True-Ups. During the Supply Term, on an annual basis, following the first (1st) calendar year from launch of Product and on a Product-by-Product basis, ETON shall perform an interim “true-up” reconciliation and shall provide Sintetica with a written report of such outlining the deductions specified in the definition of Net Sales. The reconciliation shall be based on actual cash paid or credits issued plus an estimate for any remaining liabilities incurred related to the specified Product, but not yet paid at the end of the preceding calendar year. If the foregoing reconciliation report shows either an underpayment or an overpayment between the Parties, the Party owing payment to the other Party shall pay the amount of the difference to the other Party within thirty (30) days after the date of delivery of such report. In addition, within twenty-five (25) months after the termination or expiration of the Term or Supply Term and on a Product-by-Product basis, ETON shall perform a final “true-up” reconciliation and shall provide Sintetica with a written report of such outlining the deductions specified in the definition of Net Sales. If the foregoing reconciliation report shows either an underpayment or an overpayment between the Parties, the Party owing payment to the other Party shall pay the amount of the difference to the other Party within thirty (30) days after the date of delivery of such report.
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Interim and Final True-Ups

  • FINAL COMPLETION AND FINAL PAYMENT 9.9.1 Upon receipt of written notice that the Work is ready for final inspection and acceptance and upon receipt of a final Application for Payment, the Architect will promptly make such 9.9.2 Neither the final payment nor the remaining retained percentage shall become due until the Contractor submits to the Architect (1) an affidavit that all payrolls, bills for materials and equipment, and other indebtedness connected with the Work for which the State or its property might in any way be responsible, have been paid or otherwise satisfied; (2) consent of surety, if any, to final payment; (3) Other data establishing payment or satisfaction of all such obligations, including, but not limited to, receipts, releases, or other supporting documentation. and (4) final waivers of liens arising out of the Contract, to the extent and in such form as may be designated by the State. If any Subcontractor refuses to furnish a release or waiver required by the State, the Contractor may furnish a bond satisfactory to the State to indemnify him against any such lien. If any such lien remains unsatisfied after all payments are made, the Contractor shall refund to the State all moneys that the latter may be compelled to pay in discharging such lien, including all costs and reasonable attorneys' fees. 9.9.3 If, after Substantial Completion of the Work, final completion thereof is materially delayed through no fault of the Contractor or by the issuance of Change Orders affecting final completion, and the Architect so confirms, the State shall, upon application by the Contractor and certification by the Architect, and without terminating the Contract, make payment of the balance due for that portion of the Work fully completed and accepted. If the remaining balance for Work not fully completed or corrected is less than the retainage stipulated in the Contract Documents, and if bonds have been furnished as required by the Contract Documents, the written consent of the surety to the payment of the balance due for that portion of the Work fully completed and accepted shall be submitted by the Contractor to the Architect prior to certification of such payment. Such payment shall be made under the terms and conditions governing final payment, except that it shall not constitute a waiver of claims. 9.9.4 The making of final payment shall constitute a waiver of all claims by the State except those arising from: (a) unsettled liens, (b) faulty or defective Work appearing after Substantial Completion, (c) failure of the Work to comply with the requirements of the Contract Documents, or (d) terms of any special warranties required by the Contract Documents. 9.9.5 The acceptance of final payment shall constitute a waiver of all claims by the Contractor except those previously made in writing and identified by the Contractor as unsettled at the time of the final Application for Payment.

  • Reconciliation and Final Payment Seller and Buyer shall reasonably cooperate after Closing to make a final determination of the allocations and prorations required under this Contract within one hundred eighty (180) days after the Closing Date. Upon the final reconciliation of the allocations and prorations under this Section, the party which owes the other party any sums hereunder shall pay such party such sums within ten (10) days after the reconciliation of such sums. The obligations to calculate such prorations, make such reconciliations and pay any such sums shall survive the Closing.

  • Full and Final Settlement 21.1 This agreement is in full and final settlement of all Union or employee claims relating to employee rights and entitlements. Accordingly, the Union or employees shall not pursue any extra claims, nor take any industrial or protest action concerning any matter explicitly or implicitly dealt with in this agreement. 21.2 In any event: (a) Any work that commences or resumes on a day or shift following a stoppage of work not authorised by management, shall attract ordinary time rates of pay until the full duration of the normal ordinary time period has actually been worked, so that employees shall not be over compensated for work that would have been done in ordinary time but for the stoppage. (b) The Union or employees under this agreement shall not encourage or incite employees (or other persons) not covered by this agreement to take industrial or protest action of any kind.

  • ACCEPTANCE AND FINAL PAYMENT Upon written notice to the Owner

  • Billing and Payment Procedures and Final Accounting 6.1.1 The Connecting Transmission Owner shall xxxx the Interconnection Customer for the design, engineering, construction, and procurement costs of Interconnection Facilities and Upgrades contemplated by this Agreement on a monthly basis, or as otherwise agreed by those Parties. The Interconnection Customer shall pay all invoice amounts within 30 calendar days after receipt of the invoice. 6.1.2 Within three months of completing the construction and installation of the Connecting Transmission Owner’s Interconnection Facilities and/or Upgrades described in the Attachments to this Agreement, the Connecting Transmission Owner shall provide the Interconnection Customer with a final accounting report of any difference between (1) the Interconnection Customer’s cost responsibility for the actual cost of such facilities or Upgrades, and (2) the Interconnection Customer’s previous aggregate payments to the Connecting Transmission Owner for such facilities or Upgrades. If the Interconnection Customer’s cost responsibility exceeds its previous aggregate payments, the Connecting Transmission Owner shall invoice the Interconnection Customer for the amount due and the Interconnection Customer shall make payment to the Connecting Transmission Owner within 30 calendar days. If the Interconnection Customer’s previous aggregate payments exceed its cost responsibility under this Agreement, the Connecting Transmission Owner shall refund to the Interconnection Customer an amount equal to the difference within 30 calendar days of the final accounting report. 6.1.3 If the Interconnection Customer disputes an amount to be paid, the Interconnection Customer shall pay the disputed amount to the Connecting Transmission Owner or into an interest bearing escrow account, pending resolution of the dispute in accordance with Article 10 of this Agreement. To the extent the dispute is resolved in the Interconnection Customer’s favor, that portion of the disputed amount will be credited or returned to the Interconnection Customer with interest at rates applicable to refunds under the Commission’s regulations. To the extent the dispute is resolved in the Connecting Transmission Owner’s favor, that portion of any escrowed funds and interest will be released to the Connecting Transmission Owner.

  • Royalty Reports and Payments After the first sale of a Product on which royalties are payable by a Party hereunder, such Party shall make quarterly written reports to the other Party within sixty (60) days after the end of each calendar quarter, stating in each such report, separately the number, description, and aggregate Net Sales, by territory, of each such Product sold during the calendar quarter upon which a royalty is payable under Section 6.3 or Section 6.4 above, as applicable. Concurrently with the making of such reports, such Party shall pay to the other Party royalties due at the rates specified in Section 6.3 or Section 6.4 above, as applicable.

  • Commercial Operation Date Testing and Modifications Prior to the Commercial Operation Date, the Connecting Transmission Owner shall test the Connecting Transmission Owner’s Attachment Facilities and System Upgrade Facilities and System Deliverability Upgrades and Developer shall test the Large Generating Facility and the Developer Attachment Facilities to ensure their safe and reliable operation. Similar testing may be required after initial operation. Developer and Connecting Transmission Owner shall each make any modifications to its facilities that are found to be necessary as a result of such testing. Developer shall bear the cost of all such testing and modifications. Developer shall generate test energy at the Large Generating Facility only if it has arranged for the injection of such test energy in accordance with NYISO procedures.

  • Requirements Pertaining Only to Federal Grants and Subrecipient Agreements If this Agreement is a grant that is funded in whole or in part by Federal funds:

  • Payments of Post-Closing Adjustment Except as otherwise provided herein, any payment of the Post-Closing Adjustment, together with interest calculated as set forth below, shall (A) be due (x) within five (5) Business Days of acceptance of the applicable Closing Working Capital Statement or (y) if there are Disputed Amounts, then within five (5) Business Days of the resolution described in clause (v) above; and (B) be paid by wire transfer of immediately available funds to such account(s) as is directed by Buyer or Sellers, as the case may be.

  • Equipment Testing and Inspection 2.1.1 The Interconnection Customer shall test and inspect its Small Generating Facility and Interconnection Facilities prior to interconnection. The Interconnection Customer shall notify the NYISO and the Connecting Transmission Owner of such activities no fewer than five Business Days (or as may be agreed to by the Parties) prior to such testing and inspection. Testing and inspection shall occur on a Business Day. The Connecting Transmission Owner may, at its own expense, send qualified personnel to the Small Generating Facility site to inspect the interconnection and observe the testing. The Interconnection Customer shall provide the NYISO and Connecting Transmission Owner a written test report when such testing and inspection is completed. The Small Generating Facility may not commence parallel operations if the NYISO, in consultation with the Connecting Transmission Owner, finds that the Small Generating Facility has not been installed as agreed upon or may not be operated in a safe and reliable manner. 2.1.2 The NYISO and Connecting Transmission Owner shall each provide the Interconnection Customer written acknowledgment that it has received the Interconnection Customer’s written test report. Such written acknowledgment shall not be deemed to be or construed as any representation, assurance, guarantee, or warranty by the NYISO or Connecting Transmission Owner of the safety, durability, suitability, or reliability of the Small Generating Facility or any associated control, protective, and safety devices owned or controlled by the Interconnection Customer or the quality of power produced by the Small Generating Facility.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!