Non-Medicaid-Funded Hours Worked Effective July 1, 2021, the Employer shall contribute the Healthcare Rate or three dollars and seventy-nine cents ($3.79), whichever is higher to the Trust for each Non-Medicaid- Funded hour worked. Non-Medicaid-Funded Hour(s) worked shall be defined as all hours worked by all employees covered by this Agreement in the Employer's in‐home care program that are paid by a payor other than Medicaid, excluding vacation hours, paid-time off, and training hours. Effective July 1 2022, the Employer shall contribute the Healthcare rate or three dollars and ninety-eight cents ($3.98), whichever is higher, to the Trust for each Non-Medicaid-Funded Hour worked. Contributions required by Section 21.2 shall be paid periodically as required by the Trust.
Christmas/New Year’s Scheduling K-1 Employees will receive at least five (5) consecutive days off at Christmas or New Year's. The Hospital will provide time off from the completion of the night shift the day before the holiday that the Employee is granted (either Christmas Day or New Year's Day). Christmas will include Christmas Eve Day, Christmas Day, and Boxing Day and New Year's will include New Year's Eve Day and New Year's Day. Where an Employee requests not to be scheduled off five (5) consecutive days at Christmas or New Year’s, such an Employee is to put her/his request in writing to the Clinical Manager.
How Are Distributions from a Xxxxxxxxx Education Savings Account Taxed For Federal Income Tax Purposes? Amounts distributed are generally excludable from gross income if they do not exceed the beneficiary’s “qualified higher education expenses” for the year or are rolled over to another Xxxxxxxxx Education Savings Account according to the requirements of Section (4). “Qualified higher education expenses” generally include the cost of tuition, fees, books, supplies, and equipment for enrollment at (i) accredited post-secondary educational institutions offering credit toward a bachelor’s degree, an associate’s degree, a graduate-level or professional degree or another recognized post-secondary credential and (ii) certain vocational schools. In addition, room and board may be covered if the beneficiary is at least a “half-time” student. This amount may be reduced or eliminated by certain scholarships, qualified state tuition programs, HOPE, Lifetime Learning tax credits, proceeds of certain savings bonds, and other amounts paid on the beneficiary’s behalf as well as by any other deductions or credits taken for the same expenses. The definition of “qualified education expenses” includes expenses more frequently and directly related to elementary and secondary school education, including the purchase of computer technology or equipment or Internet access and related services. To the extent payments during the year exceed such amounts, they are partially taxable and partially non-taxable similar to payments received from an annuity. Any taxable portion of a distribution is generally subject to a 10% penalty tax in addition to income tax unless the distribution is (i) due to the death or disability of the beneficiary, (ii) made on account of a scholarship received by the beneficiary, or (iii) is made in a year in which the beneficiary elects the HOPE or Lifetime Learning credit and waives the exclusion from income of the Xxxxxxxxx Education Savings Account distribution. You may be allowed to take both the HOPE or Lifetime Learning credits while simultaneously taking distributions from Xxxxxxxxx Education Savings Accounts. However, you cannot claim a credit for the same educational expenses paid for through Xxxxxxxxx Education Savings Account distributions. To the extent a distribution is taxable, capital gains treatment does not apply to amounts distributed from the account. Similarly, the special five- and ten-year averaging rules for lump-sum distributions do not apply to distributions from a Xxxxxxxxx Education Savings Account. The taxable portion of any distribution is taxed as ordinary income. The IRS does not require withholding on distributions from Xxxxxxxxx Education Savings Accounts.
Special Permit from Relevant Ministerial/ Government Agencies and Foreign Capital Ownership Limitation Raw Material for Explosives (Ammonium Nitrate) with maximum foreign equity ownership of 49% and a special permit from the Minister of Defense (ISIC 2411) Industry of explosive materials and its components for industry need with maximum foreign equity ownership of 49% and a special permit from the Minister of Defense (ISIC 2429) Sugar Industry (Xxxxx Xxxxxxx Sugar, Refined Crystal Sugar and Raw Crystal Sugar) with maximum foreign equity ownership of 95% and a special permit from the Minister of Industry and the Minister of Agriculture, and it has to be integrated with the sugar plantation. The manufacturing of raw crystal sugar is required for any sugar manufacturer with sugarcane input capacity exceeding 8000 tons per day (ISIC 1542) Processing of plantation product industry (similar capacity or exceeding a certain capacity, according to Regulation of Minister of Agriculture Number 26 of 2007 with maximum foreign capital ownership of 95% with a special permit from Minister of Agriculture. - Fiber and Seed Cotton Industry (ISIC1514, 1711) - Crude oil industry (edible oil) from vegetable and animal, coconut oil industry, palm oil industry, rubber to be sheet, thick latex, crumb rubber industry, raw castor oil industry, sugar, sugar cane and sugar cane residue industry, black tea/green tea industry, dry tobacco leaves industry, Copra, Fiber, Coconut Charcoal, Dust, Nata de coco industry, Coffee sorting, cleaning and peeling industry, Cocoa cleaning, peeling and drying industry, cleaning and peeling seed other than coffee and cacao industry, cashew to be dry seed cashew and Cashew Nut Shell Liquid (CNSL) Industry, Peppercorn to be dry white pepper and dry black pepper industry (ISIC 1514, 2429, 1542, 1549, 1600, 2519, 1531)
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
When Must Distributions from a Xxxxxxxxx Education Savings Account Begin? Distribution of a Xxxxxxxxx Education Savings Account must be made (or otherwise will be deemed made) no later than 30 days from the earlier of the beneficiary’s death or attainment of age 30. A distribution from a Xxxxxxxxx Education Savings Account may be rolled over to another beneficiary’s Xxxxxxxxx Education Savings Account according to the requirements of Section (4). Note that the Economic Growth and Tax Relief Reconciliation Act of 2001 waives the distribution age limitation if the beneficiary of the Xxxxxxxxx Education Savings Account is a “Special Needs” student.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
ADMISSION REQUIREMENTS FOR SENIOR COLLEGE PROGRAM The A.A. degree and a minimum GPA of 2.00 Grade of C or better in a credit-bearing mathematics course worth three or more credits* Grade of C or better in freshman composition, its equivalent, or a higher-level English course* *(Effective 10/1/08, per University policy) Students who wish to transfer but do not meet all of the above requirements or are unable to enroll within two years after graduation will receive admission consideration under our standard transfer credit policies. Total transfer credits granted toward the baccalaureate degree: 60 Total additional credits required at the senior college to complete baccalaureate degree: 60 Total credits required for the B.A. in Global History: 120
Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67
PRICING OF After Hours Coefficient What is your after hours coefficient for the RS Means Price Book for work performed after normal working hours? Remember that this is a ceiling price proposed. You can discount to any TIPS Member customer a lower coefficient than your proposed contract coefficient, but not higher. This is one of three pricing questions that are required for consideration for award on this solicitation. Please consider your answer carefully. An explanation of the TIPS scoring of pricing titled "Pricing Coefficient Instruction" is included in the attachments for your information. The below is an EXAMPLE of how the pricing model works (It is not intended to influence your proposed coefficient, you should propose a coefficient that you determine is reasonable for your business for the life of the contract): The most common after hours coefficient is time and a half of the RS Means Unit Price Book prices. To illustrate this coefficient, if your regular hours coefficient is .95, your after hours coefficient would be 1.45.
