Licenses Supply and Technology Transfer Sample Clauses

Open Split View

Download

Share

Cite

Licenses Supply and Technology Transfer 

Sample 1Sample 2

Save

Copy

Related to Licenses Supply and Technology Transfer

• Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

• End User License Agreement This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. xxxx://xxxxxxxxxxxxxxx.xxx/licenses/by-nc-nd/3.0/ You are free to: Share: to copy, distribute and transmit the work Under the following conditions: Attribution: You must attribute the work in the manner specified by the author (but not in any way that suggests that they endorse you or your use of the work).

• Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner. 4.2 The Parties shall negotiate with each other to enter into specific technology license contracts to expressly specify the detail matters such as the technology to be licensed, the method to license the technology, license fees and payment.

• Technology Transfer (a) Sublicensee acknowledges and agrees that ECC has delivered and made to Sublicensee a disclosure of a general introduction to the Technology and to its commercial feasibility prior to the execution of this Agreement. Except to the extent such information falls within one or more of the exceptions to the definition of "Confidential Information", all information disclosed by ECC to Sublicensee prior to the execution of this Agreement shall be deemed to constitute part of the Technology and shall be deemed to be confidential. The timing and extent of additional disclosure by ECC to Sublicensee shall be as set forth in subparagraph 22(b) hereof. (b) Upon execution of this Agreement, ECC shall provide Sublicensee with copies of the patents listed in Section B of Exhibit "B" hereto. Beyond that, ECC shall not be required to provide additional information concerning, or disclosure of, the Technology to Sublicensee until Sublicensee provides to ECC (i) written notice of Sublicensee's intent to commercialize a Product, which written notice shall include detailed specifications for the designated Product, and (ii) evidence, reasonably satisfactory to ECC, of Sublicensee's intent to commercialize the designated Product in the form of written documentation of orders placed by Sublicensee of the equipment needed by Sublicensee to produce and commercialize the designated Product or in the form of written documentation from Sublicensee confirming the dedication and/or modification of existing equipment necessary to produce the designated Product. Within ninety (90) days after ECC's receipt of the items described in the preceding sentence, ECC shall provide to Sublicensee the following additional disclosure: (w) a Product specific recipe for the production of the designated Product; (x) Product specific process specifications for the production of the designated Product; (y) copies of all patent applications listed in the Exhibits hereto that ECC deems relevant to the production of the designated Product; and (z) a list of known raw materials suppliers and preferred equipment vendors.

• License Agreement The Trust shall have the non-exclusive right to use the name "Invesco" to designate any current or future series of shares only so long as Invesco Advisers, Inc. serves as investment manager or adviser to the Trust with respect to such series of shares.

• Sublicense Agreements Sublicenses under this Section 2.3 shall be granted only pursuant to written agreements, which shall be subject to and consistent with the terms and conditions of this Agreement. Such Sublicense agreements shall contain, among other things, provisions to the following effect: 2.3.2.1 all provisions necessary to ensure Licensee’s ability to comply with Licensee’s obligation under or not violate the provisions of Sections 4.4, 4.5, 4.6, 5.1, 5.3, 5.4, 8.1 and 11.1; 2.3.2.2 a section substantially the same as Article 9 (Indemnification), which also shall state that the Indemnitees (as defined in Section 9.1) are intended third party beneficiaries of such Sublicense agreement for the purpose of enforcing such indemnification; 2.3.2.3 in the event of termination of the license set forth in Section 2.1.1 above (in whole or in part (e.g., termination of the license as to a Licensed Product or in a particular country)), any existing Sublicense shall terminate to the extent of such terminated license; provided, however, that, for each Sublicensee, upon termination of the license, if the Sublicensee is not then in breach of the Sublicense agreement such that Licensee would have the right to terminate such Sublicense agreement, such Sublicensee shall have the right to obtain a license from Harvard on the same terms and conditions as set forth herein, which shall not impose any representations, warranties, obligations or liabilities on Harvard that are not included in this Agreement, provided that (a) the scope of the license granted directly by Harvard to such Sublicensee shall be coextensive with the scope of the license granted by Licensee to such Sublicensee, (b) if the Sublicense granted to such Sublicensee was non-exclusive, such Sublicensee shall not have the right to participate in the prosecution or enforcement of the Patent Rights under the license granted to it directly by Harvard and (c) if there are more than one Sublicensee, each Sublicensee that is granted a direct license shall be responsible for a pro rata share of the reimbursement due under Section 6.2.3 of this Agreement (based on the number of direct licenses under the Patent Rights in effect on the date of reimbursement); 2.3.2.4 the Sublicensee shall only be entitled to sublicense its rights under such Sublicense agreement on the terms set forth in this Section 2.3; and 2.3.2.5 the Sublicensee shall not be entitled to assign the Sublicense agreement without the prior written consent of Harvard, except that Sublicensee may assign the Sublicense agreement to a successor in connection with the merger, consolidation or sale of all or substantially all of its assets or that portion of its business to which the Sublicense agreement relates; provided, however, that any permitted assignee agrees in writing in a manner reasonably satisfactory to Harvard to be bound by the terms of such Sublicense agreement.

• Software License Agreement 1) Customers acquiring software licenses under the Contract shall hold, use and operate such software subject to compliance with the Software License Agreement set forth in Appendix D of this Contract. No changes to the Software License Agreement terms and conditions may be made unless previously agreed to between Vendor and DIR. Customers may not add, delete or alter any of the language in Appendix D; provided however, that a Customer and Vendor may agree to additional terms and conditions that do not diminish a term or condition in the Software License Agreement, or in any manner lessen the rights or protections of Customer or the responsibilities or liabilities of Vendor. Order Fulfiller shall make the Software License Agreement terms and conditions available to all Customers at all times. 2) Compliance with the Software License Agreement is the responsibility of the Customer. DIR shall not be responsible for any Customer’s compliance with the Software License Agreement. If DIR purchases software licenses for its own use under this Contract, it shall be responsible for its compliance with the Software License Agreement terms and conditions.

• Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

• SOFTWARE LICENSE GRANT Where Product is acquired on a licensed basis the following shall constitute the license grant:

• Research License Each Collaborator shall allow the other Collaborator to practice any of its Non- Subject Inventions for the purpose of performing the Cooperative Work. No license, express or implied, for commercial application(s) is granted to either Collaborator in Non-Subject Inventions by performing the Cooperative Work. For commercial application(s) of Non-Subject Inventions, a license must be obtained from the owner.