Limitations of Area Eps Facilities Sample Clauses

Limitations of Area Eps Facilities 
AutoNDA by SimpleDocs

Related to Limitations of Area Eps Facilities

  • Working Facilities During the Term of Employment, the Company shall furnish the Executive with an office, secretarial help and such other facilities and services suitable to his position and adequate for the performance of his duties hereunder.

  • Conditions to Obligations of the Parties The obligation of the Parties to effect the Generation Exchange and the other transactions contemplated by this Agreement shall be subject to the fulfillment at or prior to the Exchange Closing Date, of the following conditions: (a) The waiting period under the HSR Act applicable to the consummation of the exchange of the Exchange Assets contemplated hereby shall have expired or been terminated; (b) No preliminary or permanent injunction or other order or decree by any Governmental Authority which prevents the consummation of the exchange of the Exchange Assets contemplated herein shall have been issued and remain in effect (each Party agreeing to use its reasonable best efforts to have any such injunction, order or decree lifted) and no statute, rule or regulation shall have been enacted by any state or federal government or Governmental Authority prohibiting the consummation of the exchange of the Exchange Assets; (c) The DLC Nuclear Closing as defined in the Nuclear Conveyance Agreement shall have occurred; (d) The CAPCO Settlement Agreement shall have been executed by DLC, the FE Subsidiaries and TEC; (e) The Support Agreement shall have been executed by FE and DLC; (f) All consents or approvals, filings with, or notices to any Governmental Authority that are necessary for the consummation of the transactions contemplated by each of the CAPCO Settlement Agreement and the Electrical Facilities Agreement shall have been obtained or made, other than such consents, approvals, filings or notices which are not required in the ordinary course to be obtained or made prior to the consummation of the transactions thereunder or which, if not obtained or made, will not prevent the parties thereto from performing their material obligations thereunder; and (g) There shall be no court order requiring DQE to consummate the transactions contemplated under the Agreement and Plan of Merger between DQE and Allegheny Energy, Inc.

  • Access to Facilities Each of the Company and each of its Subsidiaries will permit any representatives designated by the Purchaser (or any successor of the Purchaser), upon reasonable notice and during normal business hours, at such person's expense and accompanied by a representative of the Company, to: (a) visit and inspect any of the properties of the Company or any of its Subsidiaries; (b) examine the corporate and financial records of the Company or any of its Subsidiaries (unless such examination is not permitted by federal, state or local law or by contract) and make copies thereof or extracts therefrom; and (c) discuss the affairs, finances and accounts of the Company or any of its Subsidiaries with the directors, officers and independent accountants of the Company or any of its Subsidiaries. Notwithstanding the foregoing, neither the Company nor any of its Subsidiaries will provide any material, non-public information to the Purchaser unless the Purchaser signs a confidentiality agreement and otherwise complies with Regulation FD, under the federal securities laws.

  • Safe Working Conditions The Employer undertakes to maintain office furniture, equipment, etc., in a practical and safe condition in order to avoid injury to employees or damage to their attire. Employees, for their part and in their own interest, are expected to advise the Employer of any such potentially injurious equipment.

  • GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.

  • CONDITIONS OF PREMISES A. Within seven (7) days after you move-in, you are required to submit an online Room Condition Update to notify us in writing of any defects or damages in your assigned space (including common area, fixtures, appliances and furniture). Failure to do so will result in the assigned space being considered to be in a clean, safe and good working condition and you will be responsible for defects or damages that may have occurred before you moved in. B. With the exception of the items emailed to you or that you have submitted through the online Room Condition Update, you accept your assigned space, the fixtures, appliances and furniture in their “AS-IS” condition, with any faults. With regard to your assigned space, and the fixtures, appliances and furniture within, we make no express warranties and disclaim any and all implied warranties (other than the warranty of habitability). C. Excluding ordinary wear and tear from normal usage, you will be solely responsible to the Housing Office for damages to your assigned space and the furnishings provided in the assigned space. You are responsible for the cost of all repairs made necessary by you and/or your guest(s) or, as set forth below, any other person in violation of the License. This includes the negligent or careless use of your assigned space or any part of the residence hall, including, without limitation, damage from waste water stoppages caused by foreign or improper objects in lines serving the bathroom used by you, damages to furniture, appliances, doors, windows or screens, damage from windows or doors being left open and repairs or replacements to security devices necessitated by misuse or damage. You may be required to prepay for these repairs, or, if we decide to advance the funds for the repairs, you will be responsible for repaying us within ten (10) days. In addition, you could be charged for damages that may have been caused by other Residents if we cannot determine who did it, and you will be jointly and severally liable for all damages to other shared areas of the assigned space and any furnishings provided in those shared areas. If the party responsible for damages is identified, we may nonetheless determine, in our sole discretion, if you and other potentially responsible parties are allowed to renew for the next year. Your obligations to pay the charges described in this paragraph will continue after the end of this License. D. Furnishings Removal. You assume full responsibility for items furnished by us and agree to return them to us at the end of the License Term in as good condition as when you receive them, reasonable wear and tear excepted. You will be responsible for returning all furniture to its original position prior to vacating your assigned space. You will not remove our furniture, fixtures, and/or furnishings from the assigned space for any purpose.

  • RIGHT OF ALLOTTEE TO USE COMMON AREAS AND FACILITIES SUBJECT TO PAYMENT OF TOTAL MAINTENANCE CHARGES The Allottee hereby agrees to purchase the [Apartment/Plot] on the specific understanding that is/her right to the use of Common Areas shall be subject to timely payment of total maintenance charges, as determined and thereafter billed by the maintenance agency appointed or the association of allottees (or the maintenance agency appointed by it) and performance by the Allottee of all his/her obligations in respect of the terms and conditions specified by the maintenance agency or the association of allottees from time to time.

  • Use of Interconnection Facilities by Third Parties 6551 Error! Hyperlink reference not valid.9.9.1 Purpose of Interconnection Facilities. 6551

  • Conditions of Property a. The property is believed and shall be taken to be correctly described and is sold subject to all express and implied conditions, restrictions in interest, easements, common rights, leases, tenancies, occupiers, encroachment, trespass, nuisance, charges, liens, caveats, covenants, liabilities, encumbrances, all public and private rights of way, support, drainage, light and all other rights or other incidents (if any) subsisting thereon without any obligation arising for the Assignee/Bank to define the same respectively and any error, mis- statement, omission or mis-description discovered in the contract shall not annul the sale nor shall any compensation be allowed by or to either party in respect thereof. The Purchaser shall be deemed to have full knowledge of the state and condition of the property. b. The Purchaser shall be deemed to have inspected and investigated the conditions of the property as is where is and shall raise no requisition or objection thereon or thereto. No representation warranty or undertaking whatsoever is made or should be implied as to whether or not the property complies with any relevant building by-laws or legislation. The Purchaser shall take the property as is where is and shall not require the connection of water, electricity or other utilities thereto nor removal of any rubbish thereat. The fact (if such be the case) that the property or renovations thereat may contravene building by-laws or legislation shall not annul the sale or entitle the Purchaser to rescind the sale or claim damages or diminution in price. c. The Assignee/Bank makes no representation as to the ownership of furniture fittings and fixtures situated at the property which items may be on hire purchase, lease or deferred sale from third parties. In such cases the Assignee/Bank accepts no liability for any payments which may be outstanding in respect thereof and the property is sold subject thereto.

  • Conditions to the Obligations of the Parties The obligations of each Party to consummate the Transactions shall be subject to the satisfaction or written waiver (where permissible) by the Company and CCTS of the following conditions: (a) the applicable waiting period (and any extension(s) thereof) relating to the Transactions shall have expired or been terminated and any other applicable Consent shall have been obtained (or deemed, by applicable Law, to have been obtained), as applicable, so that the Transactions are deemed to be cleared, approved or consented to under any applicable Antitrust Law; (b) no Order or Law issued by any court of competent jurisdiction or other Governmental Entity or other legal restraint or prohibition, in each case preventing the consummation of the Transactions, shall be in effect, including, for the avoidance of doubt, a failure to obtain the requisite auditor’s statements required under Dutch law in order to consummate the Holdco Reorganization and issuance of the Holdco Shares in connection with the Merger; (c) the Registration Statement/Proxy Statement shall have become effective in accordance with the provisions of the Securities Act, no stop order suspending the effectiveness of the Registration Statement/Proxy Statement shall have been issued under the Securities Act and shall remain in effect with respect to the Registration Statement/Proxy Statement, and no Proceeding seeking such a stop order shall have been threatened or initiated by the SEC and remain pending; (d) the Required CCTS Shareholder Approval shall have been obtained; (i) Holdco’s initial listing application with Nasdaq in connection with the Transactions shall have been approved such that, immediately following the Closing, Holdco shall satisfy any applicable initial and continuing listing requirements of Nasdaq, (ii) Holdco shall not have received any notice of non-compliance therewith, and (iii) the Holdco Shares and Holdco Warrants to be issued in connection with the Transactions shall have been approved for listing on Nasdaq, subject to official notice of issuance; (f) after giving effect to the Transactions (including the CCTS Shareholder Redemption), Holdco shall have at least $5,000,001 of net tangible assets (as determined in accordance with Rule 3a51-1(g)(1) of the Exchange Act) immediately after the Closing; provided, that the condition set forth in this Section ‎7.1(f) shall not be applicable to the extent that such requirement has been validly removed from the Governing Documents of CCTS prior to or in connection with the CCTS Shareholders Meeting.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!