Maintenance and Modification of the Facilities by the Company Sample Clauses

Maintenance and Modification of the Facilities by the Company. The Company agrees that, at all times during the Term, the Company shall, at its own expense, operate and maintain, preserve and keep the Facilities or cause the Facilities to be maintained, preserved and kept with the appurtenances and every part and parcel thereof in good repair, working order and condition (loss by fire or other casualty, condemnation, ordinary wear, tear and obsolescence and acts of God excepted). The Company agrees during the Term to comply at all times in all material respects with all governmental laws, ordinances, approvals, rules, regulations and requirements relating to the Facilities, including, but not limited to, such zoning, sanitary, pollution, environmental, safety ordinances, laws and such rules and regulations thereunder as shall be binding upon the Company under applicable laws, except during any period in which the Company at its expense and in its name, and subject to this Section 5.5 and Section 5.6, shall be in good faith contesting compliance with any of the aforesaid laws, ordinances, approvals, rules, regulations, restrictions and requirements. The Company shall have the privilege of renovating the Facilities or making substitutions, additions, modifications, deletions and improvements to the Facilities from time to time as the Company, in its discretion, may deem to be desirable for its uses and purposes, provided, however, that the nature of the Facilities shall not be changed if such change would cause the Facilities to fail as a “manufacturing facility” under the Code or the use of the Facilities to fail as an industrial or manufacturing purpose within the meaning of the Act. The Company shall have the privilege from time to time of removing from the Facilities any Equipment or Improvements provided that such Equipment or Improvements are removed in the ordinary course of business or is replaced at the expense of the Company and such replacement shall not cause the Facilities to fail as a “manufacturing facility” under the Code or the use of the Facilities to fail as an industrial or manufacturing purpose within the meaning of the Act.
Sample 1Sample 2See All (5)
AutoNDA by SimpleDocs

Related to Maintenance and Modification of the Facilities by the Company

  • Implementation of Agreement Each Party must promptly execute all documents and do all such acts and things as is necessary or desirable to implement and give full effect to the provisions of this Agreement.

  • Withdrawal, Substitution, and Modification of Tenders 23.1 A Tenderer may withdraw, substitute, or modify its Tender after it has been submitted by sending a written notice, duly signed by an authorized representative, and shall include a copy of the authorization (the power of attorney) in accordance with ITT19.3, (except that withdrawal notices do not require copies). The corresponding substitution or modification of the Tender must accompany the respective written notice. All notices must be: a) prepared and submitted in accordance with ITT 20 and 21 (except that withdrawal notices do not require copies), and in addition, the respective envelopes shall be clearly marked “WITHDRAWAL,” “SUBSTITUTION,” or “MODIFICATION;” and b) received by the Procuring Entity prior to the deadline prescribed for submission of Xxxxxxx, in accordance with ITT 22. 23.3 Tenders requested to be withdrawn in accordance with ITT 23.1 shall be returned unopened to the Tenderers. 23.4 No Tender may be withdrawn, substituted, or modified in the interval between the deadline for submission of Tenders and the expiration of the period of Tender validity specified by the Tenderer on the Form of Tender or any extension thereof.

  • ALTERATION OF AGREEMENT A. It is hereby agreed that any alteration or modification of this Agreement shall be binding upon the parties only if agreed to in writing by both parties. B. The waiver of any condition of this Agreement by either party shall not constitute a precedent in the future enforcement of all terms and conditions herein.

  • Integration and Modification This Agreement sets forth the entire understanding and agreement of the Parties with respect to the subject matter of this Agreement and supersedes all prior agreements, understandings, negotiations, and communications, whether oral or written, with respect to such subject matter. Neither this Agreement, nor any provision or term of this Agreement, may be amended, modified, revoked, supplemented, waived, or otherwise changed except by a writing signed by all of the Parties.

  • Use of Interconnection Facilities by Third Parties 6551 Error! Hyperlink reference not valid.9.9.1 Purpose of Interconnection Facilities. 6551

  • Term, Termination and Modification This Agreement is effective for the time period indicated on Appendix A, unless sooner terminated as provided below in this Paragraph. This Agreement may be terminated by mutual agreement of the parties at any time or by the Registrant on behalf of any one or more of the Funds upon thirty (30) days’ written notice to the Adviser. In addition, this Agreement shall terminate with respect to a Fund upon termination of the Advisory Agreement with respect to such Fund.

  • TERMINATION AND MODIFICATION 271 - This Agreement shall continue in full force and effect from the date hereof until 11:59 p.m., June 30, 2002, and from year to year thereafter unless notice of termination or modification is given as provided in Paragraphs 273, 274, and 275 below. 272 - If either party desires to terminate this Agreement, it shall, sixty (60) days prior to the termination date, give written notice of termination. If neither party shall give notice of termination of this Agreement as provided in this paragraph or notice of amendment, as hereinafter provided, or if each party giving a notice of termination withdraws the same prior to termination date, this Agreement shall continue in effect from year to year thereafter subject to notice of termination by either party on sixty (60) days written notice prior to the current year's termination date. 273 - If either party desires to modify or change this Agreement, it shall sixty (60) days prior to the termination date or any subsequent termination date, give written notice of amendment in which event the notice of amendment shall set forth the nature of the amendment or amendments desired. If notice of amendment of this Agreement has been given in accordance with this paragraph, this Agreement may be terminated by either party on ten (10) days written notice of termination but not before the effective termination date of this Agreement. Any amendments that may be agreed upon shall become and be a part of this Agreement without modifying or changing any of the other terms of this Agreement. 274 - Notice of Termination Modification. Notice shall be in writing and shall be sufficient if sent by certified mail addressed to the Union, and if to the Employer, addressed to Director, Employee Relations, or to any such address as the Union or the Employer may make available to each other. 275 - This Agreement shall be effective from and after July 1, 1999, until and including June 30, 2002, with respect to all provisions of this Agreement.

  • Inspection of Agreement A copy of this Agreement shall be available at all reasonable times at the principal corporate trust office of the Warrant Agent for inspection by the holder of any Warrant Certificate. The Warrant Agent may require such holder to submit his Warrant Certificate for inspection by it.

  • Modification of Agreement This Agreement may be modified, amended, suspended or terminated, and any terms or conditions may be waived, but only by a written instrument executed by the parties hereto.

  • Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!