Maintenance and Modification of the Plant by Borrower Sample Clauses

Maintenance and Modification of the Plant by Borrower. The Borrower agrees that, until Payment of the Bonds shall be made, it will at its own expense, (i) keep the Plant and the Project Site or cause the Plant and the Project Site to be kept in as reasonably safe condition as its operations shall permit, (ii) make or cause to be made from time to time all necessary repairs thereto and renewals and replacements thereof and otherwise keep the Plant in good repair and in good operating condition and (iii) not permit or suffer others to commit a nuisance on or about the Plant or the Project Site. The Borrower shall pay or cause to be paid all costs and expenses of operation and maintenance of the Plant. The Borrower may, at its own expense, make from time to time any additions, modifications or improvements to the Plant that it may deem desirable for its business purposes and that do not materially impair the effective use, or decrease the value, of the Project.
Sample 1Sample 2See All (5)
AutoNDA by SimpleDocs

Related to Maintenance and Modification of the Plant by Borrower

  • Integration and Modification This Agreement sets forth the entire understanding and agreement of the Parties with respect to the subject matter of this Agreement and supersedes all prior agreements, understandings, negotiations, and communications, whether oral or written, with respect to such subject matter. Neither this Agreement, nor any provision or term of this Agreement, may be amended, modified, revoked, supplemented, waived, or otherwise changed except by a writing signed by all of the Parties.

  • Amendment and Modification This Agreement may only be amended, modified or supplemented by an agreement in writing signed by each party hereto.

  • Amendment and Modifications This Agreement may not be amended, modified or supplemented except by an instrument or instruments in writing signed by the party against whom enforcement of any such amendment, modification or supplement is sought.

  • TERMINATION AND MODIFICATION 271 - This Agreement shall continue in full force and effect from the date hereof until 11:59 p.m., June 30, 2002, and from year to year thereafter unless notice of termination or modification is given as provided in Paragraphs 273, 274, and 275 below. 272 - If either party desires to terminate this Agreement, it shall, sixty (60) days prior to the termination date, give written notice of termination. If neither party shall give notice of termination of this Agreement as provided in this paragraph or notice of amendment, as hereinafter provided, or if each party giving a notice of termination withdraws the same prior to termination date, this Agreement shall continue in effect from year to year thereafter subject to notice of termination by either party on sixty (60) days written notice prior to the current year's termination date. 273 - If either party desires to modify or change this Agreement, it shall sixty (60) days prior to the termination date or any subsequent termination date, give written notice of amendment in which event the notice of amendment shall set forth the nature of the amendment or amendments desired. If notice of amendment of this Agreement has been given in accordance with this paragraph, this Agreement may be terminated by either party on ten (10) days written notice of termination but not before the effective termination date of this Agreement. Any amendments that may be agreed upon shall become and be a part of this Agreement without modifying or changing any of the other terms of this Agreement. 274 - Notice of Termination Modification. Notice shall be in writing and shall be sufficient if sent by certified mail addressed to the Union, and if to the Employer, addressed to Director, Employee Relations, or to any such address as the Union or the Employer may make available to each other. 275 - This Agreement shall be effective from and after July 1, 1999, until and including June 30, 2002, with respect to all provisions of this Agreement.

  • Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.

  • Waiver and Modifications Any Party may (a) waive, in whole or in part, any inaccuracy of, or consent to the modification of, any representation or warranty made to it hereunder or in any document to be delivered pursuant hereto, (b) extend the time for the performance of any of the obligations or acts of the other Parties (c) waive or consent to the modification of any of the covenants herein contained for its benefit or waive or consent to the modification of any of the obligations of the other Parties hereto or (d) waive the fulfillment of any condition to its own obligations contained herein. No waiver or consent to the modifications of any of the provisions of this Agreement will be effective or binding unless made in writing and signed by the Party or Parties purporting to give the same and, unless otherwise provided, will be limited to the specific breach or condition waived. The rights and remedies of the Parties hereunder are cumulative and are in addition to, and not in substitution for, any other rights and remedies available at law or in equity or otherwise. No single or partial exercise by a Party of any right or remedy precludes or otherwise affects any further exercise of such right or remedy or the exercise of any other right or remedy to which that Party may be entitled. No waiver or partial waiver of any nature, in any one or more instances, will be deemed or construed a continued waiver of any condition or breach of any other term, representation or warranty in this Agreement.

  • Withdrawal, Substitution, and Modification of Tenders 23.1 A Tenderer may withdraw, substitute, or modify its Tender after it has been submitted by sending a written notice, duly signed by an authorized representative, and shall include a copy of the authorization (the power of attorney) in accordance with ITT19.3, (except that withdrawal notices do not require copies). The corresponding substitution or modification of the Tender must accompany the respective written notice. All notices must be: a) prepared and submitted in accordance with ITT 20 and 21 (except that withdrawal notices do not require copies), and in addition, the respective envelopes shall be clearly marked “WITHDRAWAL,” “SUBSTITUTION,” or “MODIFICATION;” and b) received by the Procuring Entity prior to the deadline prescribed for submission of Xxxxxxx, in accordance with ITT 22. 23.3 Tenders requested to be withdrawn in accordance with ITT 23.1 shall be returned unopened to the Tenderers. 23.4 No Tender may be withdrawn, substituted, or modified in the interval between the deadline for submission of Tenders and the expiration of the period of Tender validity specified by the Tenderer on the Form of Tender or any extension thereof.

  • Waiver and Modification Any waiver, alteration, or modification of any of the provisions of this Agreement shall be valid only if made in writing and signed by the parties hereto. Each party hereto, may waive any of its rights hereunder without affecting a waiver with respect to any subsequent occurrences or transactions hereof.

  • Construction of Agreement The parties mutually acknowledge that they and their attorneys have participated in the preparation and negotiation of this Agreement. In cases of uncertainty this Agreement shall be construed without regard to which of the parties caused the uncertainty to exist.

  • CONSTRUCTION AND RENOVATION Construction and renovation projects for a state, local, territorial, or Tribal government’s principal Emergency Operations Center (EOC) as defined by the State Administrative Agency are allowable under the EMPG Program. Written approval must be provided by FEMA prior to the use of any EMPG Program funds for construction or renovation. Requests for EMPG Program funds for construction of an EOC must be accompanied by an EOC Investment Justification (located in the Related Documents tab of the EMPG xxxxxx.xxx posting) to their Regional EMPG Manager for review. Additionally, recipients are required to submit a SF-424C Form and Budget detail citing the project costs. When applying for funds to construct communication towers Sub-Recipients must submit evidence that the Federal Communication Commission’s (FCC) Section 106 review process has been completed and submit all documentation resulting from that review to Grants Program Directorate (GPD) prior to submitting materials for EHP review. Sub-Recipients are also encouraged to have completed as many steps as possible for a successful EHP review in support of their proposal for funding (e.g., coordination with their State Historic Preservation Office to identify potential historic preservation issues and to discuss the potential for project effects, compliance with all state and EHP laws and requirements). Projects for which the Sub-Recipient believes an Environmental Assessment (EA) may be needed, as defined in as defined in DHS Instruction Manual 023-01-001-01, Revision 01, FEMA Directive 108-1 and FEMA Instruction 108-1-1, must also be identified to the FEMA EMPG Regional Program Manager within six months of the award, and completed EHP review materials must be submitted no later than 12 months before the end of the period of performance. EHP review packets should be sent to xxxxxxxxxx@xxxx.xxx. EMPG Program Sub-Recipients using funds for construction projects must comply with the Xxxxx-Xxxxx Act (40 U.S.C. §§ 3141 et seq.). Grant Sub-Recipients must ensure that their contractors or subcontractors for construction projects pay workers no less than the prevailing wages for laborers and mechanics employed on projects of a character similar to the contract work in the civil subdivision of the state in which the work is to be performed. Additional information regarding compliance with the Xxxxx- Xxxxx Act, including Department of Labor (DOL) wage determinations, is available from the following website: xxxxx://xxx.xxx.xxx/whd/govcontracts/dbra.htm In general, Sub-Recipients should consult with their Grant Manager prior to making any investment that does not clearly meet the allowable expense criteria established in this Guidance.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!