Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment
PROMOTIONS AND STAFF CHANGES 11.01 Job Postings a) When a vacancy occurs or a new position is created for a regular position which the Employer has decided to fill it shall be posted on all bulletin boards for five (5) working days and filled within forty (40) working days of the posting closing. Positions may be advertised in the media only after the Employer has determined an internal applicant is not the successful applicant. Where the Employer decides not to fill a vacant position, the Employer will provide an explanation to the Union if so requested. b) The Employer, on a temporary basis, may fill a posted position during the posting and selection period. c) For temporary positions of up to forty-two (42) days, a posting is not required. Positions of longer than forty-two (42) days (seventy-eight (78) days only in the case of temporary aquatic program positions) shall be posted except where the vacancy is created by the absence of an Employee due to vacation. d) If a temporary position is made into a regular position, the new regular position shall be posted at least 14 days prior to the end of the temporary position. (i) A posting shall include the following information: Nature of position, qualifications, skills, required knowledge and education, current shift hours and days, number of hours of work per week, and wage rate. (ii) Such qualifications may not be established in an arbitrary or discriminatory manner, and shall reflect the contents of the Job Description. 11.02 Role of Seniority in Appointments, Promotions, Demotions and Transfers a) Both parties recognize the principle of promotion within the service of the Employer in the bargaining unit (i) For classifications required by their job description to supervise other employees in the bargaining unit listed in XXX#4, appointments, promotions, demotions, and transfers shall be based on the ability, knowledge, qualifications and seniority of the Regular Employees considered. Where the ability, qualifications and knowledge of the applicants are relatively equal, the senior applicant will be the successful candidate. (ii) For all other classifications, where the ability, qualifications and knowledge are sufficient to perform the functions of the posted position, the senior applicant shall be appointed. c) If the position is not filled by a Regular Employee in (i) or (ii) above, the ability and qualifications of Casual, Temporary and Seasonal Employees shall be considered, and if relatively equal, the senior applicant as determined in Article 10.05 shall be appointed. d) If the position is not filled by an Employee in b (i), (ii), or c) above, all other applicants shall be considered.
Business Locations Set forth on Schedule 6.20(a) is a list of all Real Properties located in the United States that are owned or leased by the Loan Parties as of the Closing Date. Set forth on Schedule 6.20(b) is a list of all locations where any tangible personal property of a Loan Party is located as of the Closing Date. Set forth on Schedule 6.20(c) is the chief executive office, jurisdiction of incorporation or formation and principal place of business of each Loan Party as of the Closing Date.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
New Collateral Locations Borrower may open any new location within the continental United States provided Borrower (a) gives Lender thirty (30) days prior written notice of the intended opening of any such new location and (b) executes and delivers, or causes to be executed and delivered, to Lender such agreements, documents, and instruments as Lender may deem reasonably necessary or desirable to protect its interests in the Collateral at such location, including UCC financing statements.
Collateral Locations All of such Grantor’s locations where Collateral is located are listed on Exhibit A. All of said locations are owned by such Grantor except for locations (i) which are leased by the Grantor as lessee and designated in Part VII(b) of Exhibit A and (ii) at which Inventory is held in a public warehouse or is otherwise held by a bailee or on consignment as designated in Part VII(c) of Exhibit A.
Relocations When an employee is permanently reassigned or transferred to a new work location thirty-five (35) or more miles away from his/her present work location to accommodate the State's operational needs, he/she shall be reimbursed for actual reasonable and necessary moving expenses by common carrier. If the State requires an employee to live in a specified zone or district after initial assignment, the employee will be reimbursed for actual reasonable and necessary moving expenses by common carrier. An employee will not be permanently reassigned or transferred for disciplinary or arbitrary or capricious reasons. Unless specific requirements dictate otherwise, transfers and reassignments shall be on a voluntary basis from among qualified employees. The most senior employee who is qualified to perform the duties of the position shall be entitled to the transfer or reassignment. If there are no qualified volunteers, the least senior qualified employee shall be transferred. In the event the least senior qualified employee has children of elementary or secondary school age, he/she shall be exempted from this provision in the event no schools are available in the new assignment area or if suitable educational arrangements for such children cannot be mutually agreed to. When an employee is reassigned to a new work location under this Article, he/she will have the option, in lieu of relocation, to have recall rights under the Seniority Article of this Agreement as though he/she were laid off as of the effective date of the reassignment. The State shall provide ninety (90) days advance notice of such relocations whenever possible, and in the event that less than ninety (90) days notice is provided, the State will pay reasonable temporary relocation expenses, pursuant to the Lodging and Meals Article of this Agreement, for any period of less than ninety (90) days notice. This Article does not apply to employees relocating in connection with any reduction in force or to employees in job classes which traditionally have required performance of duties at other than a fixed location.
UNDERGROUND LOCATIONS Prior to the Company commencing any work the Customer must advise the Company of the precise location of all underground services on the site and clearly xxxx the location. The underground mains and services the Customer must identify include, but are not limited to, telephone cables, fibre optic cables, electrical services, gas services, sewer services, pumping services, sewer connections, sewer sludge mains, water mains, irrigations pipes, oil pumping mains and any other services that may be on site. Whilst the Company will take all care to avoid damage to any underground services the Customer agrees to indemnify the Company in respect of all any liability claims, loss, damage, cost and fines as a result of damage to services not precisely located and notified pursuant to this clause.
Changes in Locations, Name, etc The Borrower shall not (i) change the location of its chief executive office/chief place of business from that specified in Section 6 hereof or (ii) change its name, identity or corporate structure (or the equivalent) or change the location where it maintains its records with respect to the Collateral unless it shall have given the Lender at least 30 days prior written notice thereof and shall have delivered to the Lender all Uniform Commercial Code financing statements and amendments thereto as the Lender shall request and taken all other actions deemed necessary by the Lender to continue its perfected status in the Collateral with the same or better priority.
Provisioning Line Splitting and Splitter Space 3.8.1 The Data LEC, Voice CLEC or BellSouth may provide the splitter. When Southern Telecom or its authorized agent owns the splitter, Line Splitting requires the following: a non-designed analog Loop from the serving wire center to the NID at the End User’s location; a collocation cross connection connecting the Loop to the collocation space; a second collocation cross connection from the collocation space connected to a voice port; the high frequency spectrum line activation, and a splitter. The Loop and port cannot be a Loop and port combination (i.e. UNE-P), but must be individual stand-alone Network Elements. When BellSouth owns the splitter, Line Splitting requires the following: a non designed analog Loop from the serving wire center to the NID at the End User’s location with CFA and splitter port assignments, and a collocation cross connection from the collocation space connected to a voice port. 3.8.2 An unloaded 2-wire copper Loop must serve the End User. The meet point for the Voice CLEC and the Data LEC is the point of termination on the MDF for the Data LEC's cable and pairs. 3.8.3 The foregoing procedures are applicable to migration to Line Splitting Service from a UNE-P arrangement, BellSouth Retail Voice Service, BellSouth High Frequency Spectrum (CO Based) Line Sharing. 3.8.4 For other migration scenarios to line splitting, BellSouth will work cooperatively with CLECs to develop methods and procedures to develop a process whereby a Voice CLEC and a Data LEC may provide services over the same Loop.