EEO Provisions During the performance of this Contract the Contractor agrees as follows:
(1) The Contractor shall not discriminate against any employee or applicant for employment because of race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. The Contractor shall take affirmative action to insure that applicants are employed and that employees are treated equally during employment, without regard to race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. Such action shall include but not be limited to the following: employment, upgrading, demotion, transfer, recruitment or advertising, layoff or termination, rates of pay or other forms of compensation, and selection for training, including apprenticeship. The Contractor shall post in conspicuous places, available to employees and applicants for employment, notices setting forth these EEO provisions.
(2) The Contractor shall in all solicitations or advertisement for employees placed by or on behalf of the Contractor, state that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, political affiliation or belief, age, or handicap.
(3) The Contractor shall send a copy of the EEO provisions to each labor union or representative of workers with which it has a collective bargaining agreement or other contract or understanding.
(4) In the event of the Contractor's noncompliance with these EEO provisions, the City may cancel, terminate, or suspend this contract, in whole or in part, and the City may declare the Contractor ineligible for further City contracts.
(5) Unless exempted by the City Council of the City of Durham, the Contractor shall include these EEO provisions in every purchase order for goods to be used in performing this contract and in every subcontract related to this contract so that these EEO provisions will be binding upon such subcontractors and vendors.
Lock-Up Provisions (a) The Subject Party hereby agrees not to, during the period commencing from the Closing and ending on the earliest of (x) six (6) months after the date of the Closing and (y) the date after the Closing on which the Purchaser consummates a liquidation, merger, capital stock exchange, reorganization, or other similar transaction with an unaffiliated third party that results in all of the Purchaser’s stockholders having the right to exchange their shares of the Purchaser Common Stock for cash, securities, or other property (the “Lock-Up Period”): (i) lend, offer, pledge, hypothecate, encumber, donate, assign, sell, contract to sell, sell any option or contract to purchase, purchase any option or contract to sell, grant any option, right or warrant to purchase, or otherwise transfer or dispose of, directly or indirectly, any Restricted Securities, (ii) enter into any swap or other arrangement that transfers to another, in whole or in part, any of the economic consequences of ownership of the Restricted Securities, or (iii) publicly disclose the intention to do any of the foregoing, whether any such transaction described in clauses (i), (ii), or (iii) above is to be settled by delivery of Restricted Securities or other securities, in cash or otherwise (any of the foregoing described in clauses (i), (ii), or (iii), a “Prohibited Transfer”).
(b) The foregoing shall not apply to the transfer of any or all of the Restricted Securities (I) to any Permitted Transferee or (II) pursuant to a court order or settlement agreement related to the distribution of assets in connection with the dissolution of marriage or civil union; provided, however, that in either of cases (I) or (II), it shall be a condition to such transfer that such transfer complies with the Securities Act of 1933, as amended, and other applicable law, and that the transferee executes and delivers to the Purchaser an agreement stating that the transferee is receiving and holding the Restricted Securities subject to the provisions of this Agreement applicable to the Subject Party, and there shall be no further transfer of such Restricted Securities except in accordance with this Agreement. As used in this Agreement, the term “Permitted Transferee” shall mean: (1) the members of the Subject Party’s immediate family (for purposes of this Agreement, “immediate family” shall mean with respect to any natural person, any of the following: such person’s spouse or domestic partner, the siblings of such person and his or her spouse or domestic partner, and the direct descendants and ascendants (including adopted and step children and parents) of such person and his or her spouses or domestic partners and siblings), (2) any trust for the direct or indirect benefit of the Subject Party or the immediate family of the Subject Party, (3) if the Subject Party is a trust, to the trustor or beneficiary of such trust or to the estate of a beneficiary of such trust, (4) in the case of an entity, officers, directors, general partners, limited partners, members, or stockholders of such entity that receive such transfer as a distribution, or related investment funds or vehicles controlled or managed by such persons or their respective affiliates, (5) to any affiliate of the Subject Party, and (6) any transferee whereby there is no change in beneficial ownership. The Subject Party further agrees to execute such agreements as may be reasonably requested by the Purchaser that are consistent with the foregoing or that are necessary to give further effect thereto.
Governing Provisions This Agreement is made under and subject to the provisions of the Plan, and all of the provisions of the Plan are also provisions of this Agreement. If there is a difference or conflict between the provisions of this Agreement and the provisions of the Plan, the provisions of the Plan will govern. By signing this Agreement, the Grantee confirms that he or she has received a copy of the Plan.
CLOSING PROVISIONS (a) Subscriber agrees to be identified as a customer of JetBrains and agrees that JetBrains may refer to Subscriber by name, trade name and trademark, if applicable, and may briefly describe Subscriber’s business in JetBrains marketing materials, on JetBrains Site, and in public or legal documents. Subscriber hereby grants JetBrains a worldwide, non- exclusive, royalty-free license to use Subscriber’s name and any of Subscriber’s trade names and trademarks solely pursuant to this marketing section.
(b) This Agreement is governed by the laws of the Czech Republic. All disputes arising from the present Agreement and/or in connection with it shall be finally brought to and decided by any relevant competent common court in the Czech Republic. The parties agree that the United Nations Convention on Contracts for the International Sale of Goods does not apply to this Agreement.
(c) JetBrains may modify this Agreement at any time by posting a revised version of the Agreement on JetBrains Site. The modified terms will become effective upon posting of a revised version of the Agreement on JetBrains Site. By continuing to use Service after the effective date of any modification to this Agreement, Subscriber agrees to be bound by the modified terms. It is Subscriber’s responsibility to check JetBrains Site regularly for modifications to this Agreement.
(d) The parties are independent contractors. This Agreement does not create a partnership, franchise, joint venture, agency, or a fiduciary or employment relationship between the parties.
(e) Sections 7, 8, 9, 10, 12 (c), 12(d), 14(a), 14(b), and 14(c) shall survive any termination or expiration of this Agree- ment.
(f) There are no third-party beneficiaries to this Agreement.
(g) If any provision of this Agreement is held by a court of competent jurisdiction to be contrary to law, the provision shall be modified by the court and interpreted so as best to accomplish the objectives of the original provision to the fullest extent permitted by law, and the remaining provisions of this Agreement shall remain in effect.
COMMON PROVISIONS Article 16. Quantitative restrictions on imports and all measures having equivalent effect shall be prohibited between the Community and Israel.
Article 17. Quantitative restrictions on exports and all measures having equivalent effect shall be prohibited between the Community and Israel.
1. Products originating in Israel shall not on importation into the Community be accorded a treatment more favourable than that which the Member States apply among themselves.
2. Application of the provisions of this Agreement shall be without prejudice to Council Regulation (EEC) No. 1911/91 of 26 June 1991 on the application of the provisions of Community law to the Canary Islands.
1. The Parties shall refrain from any measure or practice of an internal fiscal nature establishing, whether directly or indirectly, discrimination between the products of one Party and like products originating in the territory of the other Party.
2. Products exported to the territory of one of the Parties may not benefit from repayment of indirect internal taxation in excess of the amount of indirect taxation imposed on them directly or indirectly.
1. In the event of specific rules being established as a result of the implementation of its agricultural policy or of any alteration of the current rules or in the event of any alteration or extension of the provisions relating to the implementation of the agricultural policy, the Party in question may amend the arrangements resulting from the Agreement in respect of the products which are the subject of those rules or alterations.
2. In such cases the Party in question shall take due account of the interests of the other Party. To this end the Parties may consult each other within the Association Council.
1. The Agreement shall not preclude the maintenance or establishment of customs unions, free-trade areas or arrangements for frontier trade, except in so far as they alter the trade arrangements provided for in the Agreement.
2. Consultation between the Community and Israel shall take place within the Association Council concerning agreements establishing customs unions or free-trade areas and, where required, on other major issues related to their respective trade policy with third countries. In particular, in the event of a third country acceding to the European Union, such consultation shall take place so as to ensure that account can be taken of the mutual interests of the Community and Israel.
Article 22. If one of the Parties finds that dumping is taking place in trade with the other Party within the meaning of Article VI of the GATT, it may take appropriate measures against this practice in accordance with the Agreement on implementation of Article VI of the GATT and with its relevant internal legislation, under the conditions and in accordance with the procedures laid down in Article 25.
Article 23. Where any product is being imported in such increased quantities and under such conditions as to cause or threaten to cause: - serious injury to domestic producers of like or directly competitive products in the territory of one of the Parties, or - serious disturbances in any sector of the economy, or - difficulties which could bring about serious deterioration in the economic situation of a region, the Community or Israel may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 25.
Article 24. Where compliance with the provisions of Article 17 leads to:
(i) re-export towards a third country against which the exporting Party maintains, for the product concerned, quantitative export restrictions, export duties, or measures having equivalent effect, or
(ii) a serious shortage, or threat thereof, of a product essential to the exporting Party, and where the situations referred to above give rise, or are likely to give rise, to major difficulties for the exporting Party, that Party may take appropriate measures under the conditions and in accordance with the procedures laid down in Article
Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments.
24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation.
24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments.
24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation.
24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation.
24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments.
24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation.
24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation.
24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation.
24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.
Remaining Provisions Except as expressly modified by this Amendment, the Employment Agreement shall remain in full force and effect. This Amendment embodies the entire agreement and understanding of the parties hereto with respect to the subject matter hereof, and supersedes all prior and contemporaneous agreements and understandings, oral or written, relative thereto.
Penalty Provisions Failure to comply with the regulatory requirements is a violation of state law that may result in penalties up to ten thousand nine hundred ten dollars ($10,910.00 USD) for strict liability violations for each day in which the violation occurs. (Cal. Code Regs., tit.17, § 94507 et seq.; Health & Saf. Code §§ 39674, 39675, 42400 et seq., 42402 et seq., and 42410.)
Surviving Provisions Notwithstanding any termination of this Agreement, each party’s obligations under Article VIII to indemnify other parties shall survive and not be affected by any termination of this Agreement. In addition, with respect to Existing Contracts, all provisions of this Agreement shall also survive and not be affected by any termination of this Agreement.
Data Provisions Subject to the limitations contained in CA Government Code Section 3558, the City shall provide the Union with all required information on newly-hired employees to the extent it is made available to the City. In addition, within ten (10) business days of the conclusion of each NEO, the City agrees to provide the Union with a stand-alone report containing a list of employees, including classification code and division, who were scheduled to, but did not attend each NEO.
