Common use of ODUF Physical File Characteristics Clause in Contracts

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality Telephone. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone will be the responsibility of Quality Telephone. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone end for the purpose of data transmission will be the responsibility of Quality Telephone. 6.2.3 If Quality Telephone utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality Telephone.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone SPARDI via CONNECT:Direct or Secure File Transfer Protocol (FTP) Direct, Connect: Enterprise Client or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone SPARDI for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone XXXXXX will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone XXXXXX will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneSPARDI. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone SPARDI will be the responsibility of Quality TelephoneSPARDI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone SPARDI end for the purpose of data transmission will be the responsibility of Quality TelephoneSPARDI. 6.2.3 If Quality Telephone SPARDI utilizes Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client for data file transmission, purchase of the Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client software will be the responsibility of Quality TelephoneSPARDI.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone MCI via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone MCI for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone MCI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone MCI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneMCI. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone MCI will be the responsibility of Quality TelephoneMCI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone MCI end for the purpose of data transmission will be the responsibility of Quality TelephoneMCI. 6.2.3 If Quality Telephone MCI utilizes Secure File Transfer Protocol (FTP) for data file transmission, ; purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneMCI.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone DTM via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone DTM for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone DTM will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone DTM will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneDTM. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone DTM will be the responsibility of Quality TelephoneDTM. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone DTM end for the purpose of data transmission will be the responsibility of Quality TelephoneDTM. 6.2.3 If Quality Telephone DTM utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneDTM.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone AllSouth Phone via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone AllSouth Phone for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone AllSouth Phone will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone AllSouth Phone will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneAllSouth Phone. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone AllSouth Phone will be the responsibility of Quality TelephoneAllSouth Phone. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone AllSouth Phone end for the purpose of data transmission will be the responsibility of Quality TelephoneAllSouth Phone. 6.2.3 If Quality Telephone AllSouth Phone utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneAllSouth Phone.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone Xxxx via CONNECT:Direct or Secure File Transfer Protocol (FTP) Direct, Connect: Enterprise Client or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone Xxxx for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone Xxxx will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone Xxxx will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneXxxx. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone Xxxx will be the responsibility of Quality TelephoneXxxx. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone Xxxx end for the purpose of data transmission will be the responsibility of Quality TelephoneXxxx. 6.2.3 If Quality Telephone Xxxx utilizes Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client for data file transmission, purchase of the Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client software will be the responsibility of Quality TelephoneXxxx.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone TelSouth via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone TelSouth for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone TelSouth will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone TelSouth will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneTelSouth. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone TelSouth will be the responsibility of Quality TelephoneTelSouth. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone TelSouth end for the purpose of data transmission will be the responsibility of Quality TelephoneTelSouth. 6.2.3 If Quality Telephone TelSouth utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneTelSouth.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone ABC Telcom via CONNECT:Direct or Secure File Transfer Protocol (FTP) Direct, Connect: Enterprise Client or another mutually agreed medium. The ODUF feed will be a variable block formatformat (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non- compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone ABC Telcom for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone ABC Telcom will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone ABC Telcom will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneABC Telcom. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone ABC Telcom will be the responsibility of Quality TelephoneABC Telcom. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone ABC Telcom end for the purpose of data transmission will be the responsibility of Quality TelephoneABC Telcom. 6.2.3 If Quality Telephone ABC Telcom utilizes Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client for data file transmission, purchase of the Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client software will be the responsibility of Quality TelephoneABC Telcom.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone BSE via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone BSE for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone BSE will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone BSE will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneBSE. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone BSE will be the responsibility of Quality TelephoneBSE. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone BSE end for the purpose of data transmission will be the responsibility of Quality TelephoneBSE. 6.2.3 If Quality Telephone BSE utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneBSE.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone CM Tel via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone CM Tel for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone CM Tel will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone CM Tel will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneCM Tel. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone CM Tel will be the responsibility of Quality TelephoneCM Tel. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone CM Tel end for the purpose of data transmission will be the responsibility of Quality TelephoneCM Tel. 6.2.3 If Quality Telephone CM Tel utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneCM Tel.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone Access Point via CONNECT:Direct or Secure File Transfer Protocol (FTP) Direct, Connect: Enterprise Client or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone Access Point for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone Access Point will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone Access Point will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneAccess Point. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone Access Point will be the responsibility of Quality TelephoneAccess Point. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone Access Point end for the purpose of data transmission will be the responsibility of Quality TelephoneAccess Point. 6.2.3 If Quality Telephone Access Point utilizes Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client for data file transmission, purchase of the Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client software will be the responsibility of Quality TelephoneAccess Point.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone DPI via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone DPI for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone DPI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone DPI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneDPI. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone DPI will be the responsibility of Quality TelephoneDPI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone DPI end for the purpose of data transmission will be the responsibility of Quality TelephoneDPI. 6.2.3 If Quality Telephone DPI utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneDPI.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone PLI via CONNECT:Direct or Secure File Transfer Protocol (FTP) Direct, Connect: Enterprise Client or another mutually agreed medium. The ODUF feed will be a variable block formatformat (2476) with an LRECL of 2472. The data on the ODUF feed will be in a non- compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone PLI for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone PLI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone PLI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephonePLI. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone PLI will be the responsibility of Quality TelephonePLI. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone PLI’s end for the purpose of data transmission will be the responsibility of Quality TelephonePLI. 6.2.3 If Quality Telephone PLI utilizes Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client for data file transmission, purchase of the Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client software will be the responsibility of Quality TelephonePLI.

ODUF Physical File Characteristics. 6.2.1 The 7.2.1 ODUF will be distributed to Quality Telephone FPB via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 7.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone FPB for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone FPB will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone FPB will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneFPB. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone FPB will be the responsibility of Quality TelephoneFPB. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone FPB’s end for the purpose of data transmission will be the responsibility of Quality TelephoneFPB. 6.2.3 7.2.3 If Quality Telephone FPB utilizes Secure File Transfer Protocol (FTP) FTP for data file transmission, purchase of the Secure File Transfer Protocol (FTP) FTP software will be the responsibility of Quality TelephoneFPB.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone NuStar via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone NuStar for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone NuStar will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone NuStar will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneNuStar. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone NuStar will be the responsibility of Quality TelephoneNuStar. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone NuStar end for the purpose of data transmission will be the responsibility of Quality TelephoneNuStar. 6.2.3 If Quality Telephone NuStar utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneNuStar.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone JCM via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone JCM for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone JCM will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone JCM will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneJCM. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone JCM will be the responsibility of Quality TelephoneJCM. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone JCM end for the purpose of data transmission will be the responsibility of Quality TelephoneJCM. 6.2.3 If Quality Telephone JCM utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneJCM.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone KMC Data via CONNECT:Direct or Secure File Transfer Protocol (FTP) Direct, Connect: Enterprise Client or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one (1) dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone KMC Data for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone KMC Data will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone KMC Data will also be responsible for any charges associated with this line. Equipment CSU/DSU equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basisthe responsibility of KMC Data. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneKMC Data. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone KMC Data will be the responsibility of Quality TelephoneKMC Data. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Partiesresponsibility of BellSouth. All equipment, including modems and software, that is required on Quality Telephone KMC Data end for the purpose of data transmission will be the responsibility of Quality TelephoneKMC Data. 6.2.3 If Quality Telephone KMC Data utilizes Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client for data file transmission, purchase of the Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client software will be the responsibility of Quality TelephoneKMC Data.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone DSL via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone DSL for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone DSL will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone DSL will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneDSL. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone DSL will be the responsibility of Quality TelephoneDSL. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone DSL end for the purpose of data transmission will be the responsibility of Quality TelephoneDSL. 6.2.3 If Quality Telephone DSL utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneDSL.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone Solution Telecom via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone Solution Telecom for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone Solution Telecom will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone Solution Telecom will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneSolution Telecom. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone Solution Telecom will be the responsibility of Quality TelephoneSolution Telecom. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone Solution Telecom end for the purpose of data transmission will be the responsibility of Quality TelephoneSolution Telecom. 6.2.3 If Quality Telephone Solution Telecom utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneSolution Telecom.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone Paramount via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone Paramount for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone Paramount will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone Paramount will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneParamount. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone Paramount will be the responsibility of Quality TelephoneParamount. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone Paramount end for the purpose of data transmission will be the responsibility of Quality TelephoneParamount. 6.2.3 If Quality Telephone Paramount utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneParamount.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone ALTICOMM via CONNECT:Direct or Secure File Transfer Protocol (FTP) Direct, Connect: Enterprise Client or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone ALTICOMM for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone ALTICOMM will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone ALTICOMM will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneALTICOMM. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone ALTICOMM will be the responsibility of Quality TelephoneALTICOMM. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone ALTICOMM end for the purpose of data transmission will be the responsibility of Quality TelephoneALTICOMM. 6.2.3 If Quality Telephone ALTICOMM utilizes Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client for data file transmission, purchase of the Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client software will be the responsibility of Quality TelephoneALTICOMM.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone Cutting Edge via CONNECT:Direct or Secure File Transfer Protocol (FTP) Direct, Connect: Enterprise Client or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone Cutting Edge for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone Cutting Edge will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone Cutting Edge will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneCutting Edge. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone Cutting Edge will be the responsibility of Quality TelephoneCutting Edge. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone Cutting Edge end for the purpose of data transmission will be the responsibility of Quality TelephoneCutting Edge. 6.2.3 If Quality Telephone Cutting Edge utilizes Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client for data file transmission, purchase of the Secure File Transfer Protocol (FTP) CONNECT:Enterprise Client software will be the responsibility of Quality TelephoneCutting Edge.

ODUF Physical File Characteristics. 6.2.1 The ODUF will be distributed to Quality Telephone Think 12 via CONNECT:Direct or Secure File Transfer Protocol (FTP) or another mutually agreed medium. The ODUF feed will be a variable block format. The data on the ODUF feed will be in a non- non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis Monday through Friday except holidays. Details such as dataset name and delivery schedule will be addressed during negotiations of the distribution medium. There will be a maximum of one dataset per workday per OCN. 6.2.2 Data circuits (private line or dial-up) will be required between BellSouth and Quality Telephone Think 12 for the purpose of data transmission when utilizing CONNECT:Direct. Where a dedicated line is required, Quality Telephone Think 12 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. Quality Telephone Think 12 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit data will be negotiated on an individual case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to Quality TelephoneThink 12. Additionally, all message toll charges associated with the use of the dial circuit by Quality Telephone Think 12 will be the responsibility of Quality TelephoneThink 12. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Quality Telephone Think 12 end for the purpose of data transmission will be the responsibility of Quality TelephoneThink 12. 6.2.3 If Quality Telephone Think 12 utilizes Secure File Transfer Protocol (FTP) for data file transmission, purchase of the Secure File Transfer Protocol (FTP) software will be the responsibility of Quality TelephoneThink 12.