OPERATOR'S PLATFORM Sample Clauses

OPERATOR'S PLATFORM. A slide-out platform shall be located below the driver's side running board step. The platform shall be constructed from 2" aluminum tubing with Grip-Strut material inserts the step shall have a minimum weight rating of 500 pounds. Deployment of this platform shall be connected to the DO NOT MOVE TRUCK warning circuit. The step shall slide on stainless steel pins fitted in a machined frame which shall mount to the pump house frame. Drawer slides are not acceptable. ****** WATER TANK ******* WATER TANK CAPACITY The current water tank will be removed and replaced with a poly tank built to have a maximum capacity of 500 gallons. NOTE: The capacity of the new water tank will be limited by the body dimensions. WARRANTY The UPF Poly IIE water tank shall be furnished with a lifetime warranty upon delivery.
AutoNDA by SimpleDocs
OPERATOR'S PLATFORM. The operator's platform shall be of a height that, in a seated position, the operator can see an object located at an elevation of 42 inches above the road surface, 24 inches from the leading edge of the bumper. Notwithstanding this requirement, the platform height shall not position the operator such that the operator's vertical upward view is less than 15°. A warning decal or sign shall be provided to alert operator to the change in floor level. The following schematic diagram illustrates a means by which the platform height can be determined, using the Critical Line of Sight.

Related to OPERATOR'S PLATFORM

  • Trading Platform You agree and acknowledge that:

  • Use of the Platform 5.1. The Client agrees that he:

  • Platform (i) Each Loan Party agrees that the Administrative Agent may, but shall not be obligated to, make the Communications (as defined below) available to the Lenders by posting the Communications on Debt Domain, Intralinks, Syndtrak or a substantially similar electronic transmission system (the “Platform”).

  • Joint Network Implementation and Grooming Process Upon request of either Party, the Parties shall jointly develop an implementation and grooming process (the “Joint Grooming Process” or “Joint Process”) which may define and detail, inter alia:

  • Platforms Except where explicitly stated otherwise, these terms apply to Optimized Service (denoted with a “+” and sometimes referred to as Rapid Delivery) and non-Optimized Services Ethernet Access and Network Services Local Access Service. In particular, standard and optional features that apply to both are set out in this General Section 1. Section 2 (Available Versions) describes the characteristics particular to Optimized Service – Access +, and then to the non-Optimized Services – Ethernet Access and Network Services Local Access Service.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CBB chooses to subtend a Verizon access Tandem, CBB’s NPA/NXX must be assigned by CBB to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG.

  • Access to System If Business Associate needs access to a Covered Entity Information Technology system to comply with its obligations under the Contract or this Agreement, Business Associate shall request, review, and comply with any and all policies applicable to Covered Entity regarding such system including, but not limited to, any policies promulgated by the Office of Information Technology and available at xxxx://xxx.xxxxx.xx.xx/about/policies.

  • Project Website The State will develop and maintain a website that will be made available in advance of the first public meeting for this project. The Engineer shall provide project information for the project website to the State including documents related to project background, study area limits, study objectives, project photos, study area maps, material presented at public meetings, and contact information for requesting additional information. The project website will be updated with the documents and other information provided by the Engineer to the State after each set of public meetings and the final report in PDF format provided by the Engineer will be posted by the State to give the general public access to the document.

  • Operator Materials Operator retains all right, title and interest in and to any and all of Operator’s software, materials, tools, forms, documentation, training and implementation materials and intellectual property (“Operator Materials”). Operator grants to the LEA a personal, nonexclusive license to use the Operator Materials for its own non-commercial, incidental use as set forth in the Service Agreement. Operator represents that it has all intellectual property rights necessary to enter into and perform its obligations in this DPA and the Service Agreement, warrants to the District that the District will have use of any intellectual property contemplated by the Service Agreement free and clear of claims of any nature by any third Party including, without limitation, copyright or patent infringement claims, and agrees to indemnify the District for any related claims.

  • ELECTRONIC WORKFLOW SYSTEM OGS reserves the right to incorporate an electronic workflow system that may include elements of the Authorized User RFQ process. OGS reserves the right to post Authorized User Contract usage of Centralized Contracts. TRAVEL, MEALS AND LODGING - LOT 4 – IMPLEMENTATION ONLY For Lot 4 only, when provided for in the RFQ and resultant Authorized User Agreement, the Authorized Users may reimburse travel expenses. All rules and regulations associated with this travel can be found at xxxx://xxx.xxxxx.xx.xx/agencies/travel/travel.htm. In no case will any travel reimbursement be charged that exceeds these rates. All travel will be paid only as specified within the Authorized User Agreement and must be billed with the associated services on the same Invoice with receipts attached. The Contractor shall receive prior approval from the Authorized User for any travel that occurs during the term of an Authorized User Agreement. Parking fees and/or parking tickets shall not be paid by an Authorized User. Unless otherwise specified in writing by the Authorized User, a vehicle will not be provided by Authorized User to the Contractor for travel. Therefore, the Contractor will be responsible for ensuring that the Contractor has access to an appropriate vehicle (e.g., personal vehicle or rental vehicle) or common carrier with which to carry out any necessary travel. For the Contractor to obtain reimbursement for the use of a rental vehicle, such use must be justified as the most cost- effective mode of transportation under the circumstances (including consideration of the most effective use of time). The Contractor is responsible for keeping adequate records to substantiate any claims for travel reimbursement. All services provided under the resultant Authorized User Agreement must be performed within CONUS. PERFORMANCE AND BID BONDS There are no BONDS for this Contract. However, an Authorized User may require in an RFQ a performance, payment or Bid bond, or negotiable irrevocable letter of credit or other form of security for the faithful performance for the resultant Authorized User Agreement. CONTRACTOR REQUIREMENTS AND PROCEDURES FOR PARTICIPATION BY NEW YORK STATE CERTIFIED MINORITY- AND WOMEN-OWNED BUSINESS ENTERPRISES AND EQUAL EMPLOYMENT OPPORTUNITIES FOR MINORITY GROUP MEMBERS AND WOMEN I. New York State Law Pursuant to New York State Executive Law Article 15-A and Parts 140-145 of Title 5 of the New York Codes, Rules and Regulations (“NYCRR”), the New York State Office of General Services (“OGS”) is required to promote opportunities for the maximum feasible participation of New York State-certified Minority- and Women-owned Business Enterprises (“MWBEs”) and the employment of minority group members and women in the performance of OGS contracts.

Time is Money Join Law Insider Premium to draft better contracts faster.