Oxidation Reduction Potential (ORP) Sensor Sample Clauses

Oxidation Reduction Potential (ORP) Sensor. 3.8.1 ORP calibration standard is made by mixing 125ml of DIW with YSI’s 3682 Xxxxxx ORP Calibration Solution. This NIST traceable ORP standard is created specifically by YSI to calibrate the EXO’s ORP sensor. 3.8.2 Pour the correct amount of standard with a known oxidation reduction potential value in a clean, dry or calibration cup.
AutoNDA by SimpleDocs

Related to Oxidation Reduction Potential (ORP) Sensor

  • WORKFORCE REDUCTION SECTION 1 Layoffs (A) When employees are to be laid off as defined in the F.S., the state shall implement such layoff in the following manner: (1) The competitive area for the bargaining unit shall be statewide unless the Department and PBA agree otherwise. (2) Layoff shall be by class or occupational level within the Security Services Bargaining Unit. (3) An employee who has not attained permanent status in his current position may be laid off without applying the provision for retention rights. (4) No employee with permanent status in his current position shall be laid off while an employee who does not hold permanent status in his current position is serving in that class or level unless the permanent employee does not elect to exercise his retention rights or does not meet the selective competition criteria. (5) All employees who have permanent status in their current positions shall be ranked on a layoff list for the affected class or level based on the total retention points derived as follows: (a) Length of service retention points shall be based on one point for each month of continuous service in a Career Service position. 1. An employee who resigns from one Career Service position to accept employment in another Career Service position is not considered to have a break in service. 2. An employee who has been laid off and is reemployed within one year from the date of the layoff shall not be considered to have a break in service. 3. Moving from Career Service to Selected Exempt Service or Senior Management Service and back to Career Service does not constitute a break in service unless the employee’s break in service is more than 31 calendar days. Only time spent in the Career Service is counted in calculating retention points. (b) Retention points deducted for performance not meeting performance standards or work expectations defined for the position shall be based on the five years immediately prior to the agency’s established cutoff date. Five points shall be deducted for each month an employee has a rating below performance expectations. (6) The layoff list shall be prepared by totaling retention points. Employees eligible for veterans’ preference pursuant to section 295.07(1)(a) or (b), F.S., shall have 15 percent added to their total retention points, those eligible pursuant to section 295.07(1)(c), (d), or (e), F.S., shall have 10 percent added to their total retention points, and those eligible pursuant to section 295.071(1)(f), or (g), F.S., shall have five percent added to their total retention points. (7) The employee with the highest total retention points is placed at the top of the list, and the employee with the lowest retention points is placed at the bottom of the list. (8) The employee at the top of the list shall bump the employee at the bottom of the list. The next highest employee on the list and the remaining employees shall be handled in the same manner until the total number of filled positions in the class to be abolished is complete. (9) Should two or more employees have the same combined total of retention points, the order of layoff shall be determined by giving preference for retention in the following sequence: (a) The employee with the longest service in the affected class. (b) The employee with the longest continuous service in the Career Service. (c) The employee who is entitled to veterans’ preference pursuant to section 295.07(1), F.S. (10) An employee who has permanent status in his current position and is to be laid off shall be given at least 14 calendar days’ notice of such layoff or two weeks’ pay, or a combination of days of notice and pay. Any payment will be made at the employee’s current hourly base rate of pay. The notice of layoff shall be in writing and sent to the employee by certified mail, return receipt requested. Within seven calendar days after receiving the notice of layoff, the employee shall have the right to request, in writing, a lateral action, reassignment, or demotion within the competitive area in lieu of layoff to a position in a class within the bargaining unit in which the employee held permanent status, or to a position in a class at the level of or below the class in the bargaining unit in which the employee held permanent status. (11) An employee’s request for lateral action, reassignment, or demotion shall be granted unless it would cause the layoff of another employee who possesses a greater total of retention points. (12) An employee adversely affected as a result of another employee having a greater number of retention points shall have the same right of lateral action, reassignment or demotion under the same procedure as provided in this section. (13) If an employee requests a lateral action, reassignment, or demotion in lieu of layoff, the same formula and criteria for establishing retention points for that class shall be used as prescribed in this section. (B) If there is to be a layoff of employees, the state shall take all reasonable steps to place any adversely affected employees in existing vacancies for which they are qualified. (C) If work performed by employees in this unit is to be performed by non-state employees, the state agrees to encourage the employing entity to consider any adversely affected unit employees for employment in its organization if the state has been unable to place the employees in other positions within the State Personnel System.

  • How Do I Correct an Excess Contribution? If you make a contribution in excess of your allowable maximum, you may correct the excess contribution and avoid the 6% penalty tax under Section 4973 of the Internal Revenue Code for that year by withdrawing the excess contribution and its earnings on or before the due date, including extensions, of the tax return for the tax year for which the contribution was made (generally October 15th). Any earnings on the withdrawn excess contribution may be subject to a 10% early distribution penalty tax if you are under age 59½. In addition, in certain cases an excess contribution may be withdrawn after the time for filing your tax return. Finally, excess contributions for one year may be carried forward and applied against the contribution limitation in succeeding years.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

  • Staff Reduction 11.1 When a reduction within the District is needed, the affected employee(s) and the Association will be notified as to which position(s) will be eliminated or reduced at least fourteen (14) calendar days prior to the reduction. 11.2 When a reduction within the District is needed, the Board will determine which position(s) will be eliminated or reduced. An employee whose position will be eliminated or reduced shall have the right to displace an employee in his/her present job classification or another job classification in accordance with the following: a. The laid off or reduced employee has greater seniority than the employee to be displaced. b. The laid off or reduced employee had an equal or greater number of hours in his/her regular schedule than the employee to be displaced. c. The laid off or reduced employee presently has the necessary qualifications to perform the work. d. The laid off or reduced employee elects to exercise his/her displacement rights within five (5) working days of notification of his/her layoff or reduction. An employee displaced under this section is also entitled to displacement rights under this section. 11.3 When filling vacancies which occur after a reduction in staff, laid off bargaining unit members who have been released less than two (2) years, shall be recalled in the order of seniority, with the most senior member being recalled first to any position for which he/she is qualified. Effective July 1, 1991, newly hired bargaining unit members shall be subject to recall for two (2) years. If the employee fails to report to work within ten (10) working days from the receipt of the recall notice via certified or registered mail, that person shall be considered a voluntary terminated employee. However, if an employee is recalled to a position of lesser hours, he/she shall have the option to refuse the position and shall not be removed from the recall list as a result of this action. 11.4 An employee may elect to accept layoff rather than exercise his/her bumping rights. 11.5 For the purposes of this agreement, qualified shall be defined as capable of skillfully and efficiently performing the job duties as summarized in the job description in a competent manner with minimal instruction. The District reserves the right to test employees as needed. Qualified includes the following: a. Any licenses, certification and training necessary to perform the job, and b. demonstrated skills and merits. The most senior qualified employee shall be selected, excepting that a less senior candidate may be selected if he/she has greatly superior training and skills. The burden of proof of greatly superior training and skills shall be on the Board.

  • Food Service Waste Reduction Requirements Contractor shall comply with the Food Service Waste Reduction Ordinance, as set forth in San Francisco Environment Code Chapter 16, including but not limited to the remedies for noncompliance provided therein.

  • SPECIALIZED JOB CLASSES Where there is a particular specialized job class in which the pay rate is below the local market value assessment of that job class, the parties may use existing means under the collective agreement to adjust compensation for that job class.

  • RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

  • Reallocation to a Class with a Lower Salary Range Maximum 1. If the employee meets the skills and abilities requirements of the position and chooses to remain in the reallocated position, the employee retains the existing appointment status and has the right to be placed on the Employer’s internal layoff list for the classification occupied prior to the reallocation. 2. If the employee chooses to vacate the position or does not meet the skills and abilities requirements of the position, the layoff procedure specified in Article 31 of this Agreement applies.

  • REDUCTION IN FORCE A. In any reduction in the bargaining unit as a result of budgetary actions or curriculum and/or administrative organization, every effort will be made to transfer affected teachers to other similar positions within the school system where vacancies exist and for which the affected teachers are certified. B. If no similar positions are available, rehired retirees, provisionally certificated teachers and non- tenured teachers in the subjects and/or grade levels affected will be laid off or separated from the active employment rolls prior to tenured teachers in the same subjects and/or grade levels. If it becomes necessary to lay off tenured teachers, they shall be laid off in the inverse order of their seniority. An appropriate seniority list will be made available for inspection when a tenured teacher has been laid off and disputes a seniority ranking. The seniority list will be developed from the last date of employment and furnished to the Association. If there is a tie, the affected teachers will have seniority calculated as defined in Article I, Section B.7. Teachers on an unpaid leave of absence shall retain accrued seniority. Teachers on military leave, Association leave and on layoff shall continue to accrue seniority during that time. A countywide list of all certificated personnel employed as of July 1 of each year shall be compiled and available upon request of FCTA. The list will indicate name, date of first employment, date of current employment and department and location code. C. Teachers on layoff shall be placed on a priority recall list in accordance with their seniority. The teachers shall be recalled as vacancies become available in accordance with their position on the list and their certification for said vacancies. D. When vacancies become available, the teacher will be notified of the vacancy by phone and email sent to the last known address. The teacher so notified shall notify the responsible administrator, in writing, in not more than ten (10) days after receipt of notification of the vacancy as to whether or not the position will be accepted. The teacher may decline the first offer of employment. If the teacher declines the second offer of a position, reemployment rights shall be forfeited. All teachers shall remain on the priority recall list for a maximum of three (3) years. E. While a layoff continues, no new teachers shall be hired except in those unique circumstances where (a) there are no teachers on the priority recall list qualified to fill the vacancy or (b) all qualified teachers on the priority recall list decline the offer to fill the vacancy. F. Any layoff due to reduction in force shall not be subject to any dismissal procedure required elsewhere in this Agreement. G. Teachers recalled under these provisions shall have restored to them all previously accrued sick leave and personal leave. H. The Board and the Association recognize that appropriate governmental agencies that have jurisdiction may promulgate rulings and/or regulations that may impact this Article. If such rulings or regulations cause any provisions to be in conflict, the parties shall meet within ten (10) days for the purpose of renegotiating only the provision(s) held to be contrary.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!