Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A Government N/A Government 1500 N/A Government N/A Government 2000 N/A Government N/A Government 2500 N/A Government N/A Government 3000 N/A Government N/A Government 3500 N/A Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
Appears in 3 contracts
Samples: imlive.s3.amazonaws.com, imlive.s3.amazonaws.com, imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A 0001 Destination Government N/A Destination Government 1500 N/A 0002 Destination Government N/A Destination Government 2000 N/A 0003 Origin Government N/A Origin Government 2500 N/A 0004 Destination Government N/A Destination Government 3000 N/A 0005 Origin Government N/A Origin Government 3500 N/A 0006 Destination Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H014 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES (NAVSEA) (OCT 2018) Item(s) 0001 and 0002 - Inspection and acceptance shall be made by the Contracting Officer’s Representative (COR) or a designated representative of the Government. (End of Text) E-246-H015 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (NAVSEA) (FEB 2019) Item(s) 0001 and 0002 - For engineering services in support of delivered supplies, authorization for services shall be made by the PCO or Contracting Officer’s Representative (COR). Inspection and acceptance shall be made by the COR or a designated representative of the Government following the receipt of the certification of performance on the delivered hardware. (End of text) E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0004 - Inspection and acceptance shall be made at destination by a representative of the Government. (End of text) E-246-H017 INSPECTION AND ACCEPTANCE OF F.O.B. ORIGIN DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0003 - Inspection and acceptance shall be made at source by a representative of the cognizant Contract Administration Office or other representative of the Government. (End of text) E-246-H019 INSPECTION AND ACCEPTANCE OF PROVISIONING TECHNICAL DOCUMENTATION (NAVSEA) (OCT 2018) Item(s) 0005 - The Government may accept, conditionally accept, or reject the Provisioning Technical Documentation (PTD) within sixty days after its delivery, or as specified on the applicable CDRL(s). A notice of conditional acceptance shall state any corrective action required by the Contractor. If PTD is rejected, the Contractor may be required, at the option of the Government, to correct any or all of the PTD. The Contractor shall at no additional cost to the Government make any necessary changes, modifications, or corrections to the PTD. The Government shall take action on the corrected PTD within the time limit specified above. Government action under this requirement shall not affect or limit any other rights it may have under this contract. (End of text) E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11 HIGHER11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-LEVEL CONTRACT QUALITY REQUIREMENT H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. (End of text) Section F - Deliveries or Performance DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 0002 POP 26-FEB-2021 TO 25-FEB-2026 N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N63394 0003 180 dys. ADC N/A FOB: Origin (Shipping Point) 0004 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 0005 180 dys. ADC 1 N/A FOB: Origin (Shipping Point) 0006 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 CLAUSES INCORPORATED BY REFERENCE 52.211-8 Alt III Time of Delivery (Jun 1997) Alternate III APR 1984 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-30 F.O.B. Origin, Contractor's Facility FEB 2006 CLAUSES INCORPORATED BY FULL TEXT F-242-H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (NAVSEA) (OCT 2018) In the event the contractor anticipates or encounters difficulty in complying with the contract delivery schedule or date, the contractor shall immediately notify, in writing, the Contracting Officer and the cognizant Contract Administration Services Office, if assigned. The notice shall give the pertinent details; however, such notice shall not constitute a waiver by the Government of any contract delivery schedule, or of any rights or remedies provided by law or under this contract. (End of text) CLAUSES INCORPORATED BY FULL TEXT F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018) All data to be furnished under this contract shall be delivered prepaid to the destination(s) and at the time(s) specified on the Contract Data Requirements List(s), DD Form 1423. (End of Text) F-247-H003 F.O.B. ORIGIN (NAVSEA) (OCT 2018) All supplies hereunder shall be delivered free of expense to the Government in accordance with instructions specified in the clause hereof entitled "F.O.B. Origin" (FAR 52.247-29) at or near the Contractor's plant, (insert city, county, and state), for shipment at Government expense (normally on Government bill(s) of lading) in accordance with the delivery instructions specified herein. This paragraph is required pursuant to 52.247-29 (a)(1). FMS item(s), if any, shall be shipped on a separate bill of lading and Interstate Commerce Act 49 U.S.C. Section 10721 and 13712 rates do not apply. (End of text) F-247-H004 RESTRICTIONS FOR SHIPPING TO MILITARY AIR OR WATER PORT/ TERMINAL (NAVSEA) (OCT 2018) The Contractor shall not ship directly to a military air or water port/terminal without authorization by the cognizant Contract Administration Office. (End of text) Section G - Contract Administration Data CLAUSES INCORPORATED BY REFERENCE 252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DEC 2018 252.246-7001 Warranty Of Data MAR 2014 G-216-H003 ORDERING PROCESS FOR MULTIPLE AWARD CONTRACTS (MACS) (NAVSEA) (MAY 2019) JAN 2020 CLAUSES INCORPORATED BY FULL TEXT 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 20142018)
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to (End of text) D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the above cited MIL-STD use of yellow wrapping or packaging material is prohibited except where used for marking the containment of assorted (related-unrelated) itemsradioactive material. Loose fill polystyrene is prohibited for shipboard use. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A 0001 Destination Government N/A Destination Government 1500 N/A 0002 Destination Government N/A Destination Government 2000 N/A 0003 Destination Government N/A Destination Government 2500 N/A 0004 Destination Government N/A Destination Government 3000 N/A 0005 Destination Government N/A Destination Government 3500 N/A 0006 Destination Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 252.246-7000 Material Inspection And Receiving Report MAR 2008 252.246-7007 Contractor Counterfeit Electronic Part Detection and AUG 2016 Avoidance System 252.246-7008 Sources of Electronic Parts MAY 2018 E-246-H014 INSPECTION AND ACCEPTANCE OF ENGINEERING OCT 2018 SERVICES (NAVSEA) (OCT 2018) CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A 0001 Destination Government N/A Destination Government 1500 N/A 0002 Destination Government N/A Destination Government 2000 N/A 0003 Origin Government N/A Origin Government 2500 N/A 0004 Destination Government N/A Destination Government 3000 N/A 0005 Origin Government N/A Origin Government 3500 N/A 0006 Destination Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H014 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES (NAVSEA) (OCT 2018) Item(s) 0001 and 0002 - Inspection and acceptance shall be made by the Contracting Officer’s Representative (COR) or a designated representative of the Government. (End of Text) E-246-H015 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (NAVSEA) (FEB 2019) Item(s) 0001 and 00020001 and 0002 - For engineering services in support of delivered supplies, authorization for services shall be made by the PCO or Contracting Officer’s Representative (COR). Inspection and acceptance shall be made by the COR or a designated representative of the Government following the receipt of the certification of performance on the delivered hardware. (End of text) E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 00040004 - Inspection and acceptance shall be made at destination by a representative of the Government. (End of text) E-246-H017 INSPECTION AND ACCEPTANCE OF F.O.B. ORIGIN DELIVERIES (NAVSEA) (OCT 2018) Item(s) 00030003 - Inspection and acceptance shall be made at source by a representative of the cognizant Contract Administration Office or other representative of the Government. (End of text) E-246-H019 INSPECTION AND ACCEPTANCE OF PROVISIONING TECHNICAL DOCUMENTATION (NAVSEA) (OCT 2018) Item(s) 00050005 - The Government may accept, conditionally accept, or reject the Provisioning Technical Documentation (PTD) within sixty days after its delivery, or as specified on the applicable CDRL(s). A notice of conditional acceptance shall state any corrective action required by the Contractor. If PTD is rejected, the Contractor may be required, at the option of the Government, to correct any or all of the PTD. The Contractor shall at no additional cost to the Government make any necessary changes, modifications, or corrections to the PTD. The Government shall take action on the corrected PTD within the time limit specified above. Government action under this requirement shall not affect or limit any other rights it may have under this contract. (End of text) E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11 HIGHER11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-LEVEL CONTRACT QUALITY REQUIREMENT H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. (End of text) Section F - Deliveries or Performance DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 0002 POP 26-FEB-2021 TO 25-FEB-2026 N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N63394 0003 180 dys. ADC N/A FOB: Origin (Shipping Point) 0004 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 0005 180 dys. ADC 1 N/A FOB: Origin (Shipping Point) 0006 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 CLAUSES INCORPORATED BY REFERENCE 52.211-8 Alt III Time of Delivery (Jun 1997) Alternate III APR 1984 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-30 F.O.B. Origin, Contractor's Facility FEB 2006 CLAUSES INCORPORATED BY FULL TEXT F-242-H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (NAVSEA) (OCT 2018) In the event the contractor anticipates or encounters difficulty in complying with the contract delivery schedule or date, the contractor shall immediately notify, in writing, the Contracting Officer and the cognizant Contract Administration Services Office, if assigned. The notice shall give the pertinent details; however, such notice shall not constitute a waiver by the Government of any contract delivery schedule, or of any rights or remedies provided by law or under this contract. (End of text) CLAUSES INCORPORATED BY FULL TEXT F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018) All data to be furnished under this contract shall be delivered prepaid to the destination(s) and at the time(s) specified on the Contract Data Requirements List(s), DD Form 1423. (End of Text) F-247-H003 F.O.B. ORIGIN (NAVSEA) (OCT 2018) All supplies hereunder shall be delivered free of expense to the Government in accordance with instructions specified in the clause hereof entitled "F.O.B. Origin" (FAR 52.247-29) at or near the Contractor's plant, (insert city, county, and state), for shipment at Government expense (normally on Government bill(s) of lading) in accordance with the delivery instructions specified herein. This paragraph is required pursuant to 52.247-29 (a)(1). FMS item(s), if any, shall be shipped on a separate bill of lading and Interstate Commerce Act 49 U.S.C. Section 10721 and 13712 rates do not apply. (End of text) F-247-H004 RESTRICTIONS FOR SHIPPING TO MILITARY AIR OR WATER PORT/ TERMINAL (NAVSEA) (OCT 2018) The Contractor shall not ship directly to a military air or water port/terminal without authorization by the cognizant Contract Administration Office. (End of text) Section G - Contract Administration Data CLAUSES INCORPORATED BY REFERENCE 252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DEC 2018 252.246-7001 Warranty Of Data MAR 2014 G-216-H003 ORDERING PROCESS FOR MULTIPLE AWARD CONTRACTS (MACS) (NAVSEA) (MAY 2019) JAN 2020 CLAUSES INCORPORATED BY FULL TEXT 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 20142018)
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to (End of text) D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the above cited MIL-STD use of yellow wrapping or packaging material is prohibited except where used for marking the containment of assorted (related-unrelated) itemsradioactive material. Loose fill polystyrene is prohibited for shipboard use. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A 0001 Destination Government N/A Destination Government 1500 N/A 0002 Destination Government N/A Destination Government 2000 N/A 0003 Destination Government N/A Government 2500 N/A Government N/A Government 3000 N/A Government N/A Government 3500 N/A Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246E-246-11 HIGHERH013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-LEVEL CONTRACT H014 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES (NAVSEA) (OCT 2018) Item(s) 0001 - Inspection and acceptance shall be made by the Contracting Officer’s Representative (COR) or a designated representative of the Government. (End of Text) E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002 - Inspection and acceptance shall be made at destination by a representative of the Government. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H023 QUALITY REQUIREMENT FOR SOFTWARE DEVELOPMENT OR PRODUCTION (DEC 2014)NAVSEA) (JAN 2019) The contractor's software quality program shall be an integral part of the overall Quality Management System. Software quality program controls shall be applicable to all project software that is developed, maintained, or modified within the following categories:
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A 0001 Destination Government N/A Destination Government 1500 N/A 0002 Destination Government N/A Destination Government 2000 N/A 0003 Origin Government N/A Origin Government 2500 N/A 0004 Destination Government N/A Destination Government 3000 N/A 0005 Origin Government N/A Origin Government 3500 N/A 0006 Destination Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H014 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES (NAVSEA) (OCT 2018) Item(s) 0 001 and 0002 - Inspection and acceptance shall be made by the Contracting Officer’s Representative (COR) or a designated representative of the Government. (End of Text) E-246-H015 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES IN SUPPORT OF SUPPLIES (NAVSEA) (FEB 2019) Item(s) 0 001 and 0002 - For engineering services in support of delivered supplies, authorization for services shall be made by the PCO or Contracting Officer’s Representative (COR). Inspection and acceptance shall be made by the COR or a designated representative of the Government following the receipt of the certification of performance on the delivered hardware. (End of text) E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0 004 - Inspection and acceptance shall be made at destination by a representative of the Government. (End of text) E-246-H017 INSPECTION AND ACCEPTANCE OF F.O.B. ORIGIN DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0 003 - Inspection and acceptance shall be made at source by a representative of the cognizant Contract Administration Office or other representative of the Government. (End of text) E-246-H019 INSPECTION AND ACCEPTANCE OF PROVISIONING TECHNICAL DOCUMENTATION (NAVSEA) (OCT 2018) Item(s) 0 005 - The Government may accept, conditionally accept, or reject the Provisioning Technical Documentation (PTD) within sixty days after its delivery, or as specified on the applicable CDRL(s). A notice of conditional acceptance shall state any corrective action required by the Contractor. If PTD is rejected, the Contractor may be required, at the option of the Government, to correct any or all of the PTD. The Contractor shall at no additional cost to the Government make any necessary changes, modifications, or corrections to the PTD. The Government shall take action on the corrected PTD within the time limit specified above. Government action under this requirement shall not affect or limit any other rights it may have under this contract. (End of text) E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11 HIGHER11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-LEVEL CONTRACT QUALITY REQUIREMENT H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. (End of text) Section F - Deliveries or Performance DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 0002 POP 26-FEB-2021 TO 25-FEB-2026 N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N63394 0003 180 dys. ADC N/A FOB: Origin (Shipping Point) 0004 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 0005 180 dys. ADC 1 N/A FOB: Origin (Shipping Point) 0006 POP 26-FEB-2021 TO 25-FEB-2026 N/A NAVAL SURFACE WARFARE CENTER RECEIVING OFFICER 0000 XXXXXXX XXX BUILDING 000 XXXX XXXXXXX XX 00000-4307 805-228-8747 FOB: Destination N63394 CLAUSES INCORPORATED BY REFERENCE 52.211-8 Alt III Time of Delivery (Jun 1997) Alternate III APR 1984 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-30 F.O.B. Origin, Contractor's Facility FEB 2006 CLAUSES INCORPORATED BY FULL TEXT F-242-H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (NAVSEA) (OCT 2018) In the event the contractor anticipates or encounters difficulty in complying with the contract delivery schedule or date, the contractor shall immediately notify, in writing, the Contracting Officer and the cognizant Contract Administration Services Office, if assigned. The notice shall give the pertinent details; however, such notice shall not constitute a waiver by the Government of any contract delivery schedule, or of any rights or remedies provided by law or under this contract. (End of text) CLAUSES INCORPORATED BY FULL TEXT F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018) All data to be furnished under this contract shall be delivered prepaid to the destination(s) and at the time(s) specified on the Contract Data Requirements List(s), DD Form 1423. (End of Text) F-247-H003 F.O.B. ORIGIN (NAVSEA) (OCT 2018) All supplies hereunder shall be delivered free of expense to the Government in accordance with instructions specified in the clause hereof entitled "F.O.B. Origin" (FAR 52.247-29) at or near the Contractor's plant, (insert city, county, and state), for shipment at Government expense (normally on Government bill(s) of lading) in accordance with the delivery instructions specified herein. This paragraph is required pursuant to 52.247-29 (a)(1). FMS item(s), if any, shall be shipped on a separate bill of lading and Interstate Commerce Act 49 U.S.C. Section 10721 and 13712 rates do not apply. (End of text) F-247-H004 RESTRICTIONS FOR SHIPPING TO MILITARY AIR OR WATER PORT/ TERMINAL (NAVSEA) (OCT 2018) The Contractor shall not ship directly to a military air or water port/terminal without authorization by the cognizant Contract Administration Office. (End of text) Page 55 of 128 Section G - Contract Administration Data CLAUSES INCORPORATED BY REFERENCE 252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving DEC 2018 Reports 252.246-7001 Warranty Of Data MAR 2014 G-216-H003 ORDERING PROCESS FOR MULTIPLE AWARD JAN 2020 CONTRACTS (MACS) (NAVSEA) (MAY 2019) CLAUSES INCORPORATED BY FULL TEXT 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 20142018)
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to (End of text) D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the above cited MIL-STD use of yellow wrapping or packaging material is prohibited except where used for marking the containment of assorted (related-unrelated) itemsradioactive material. Loose fill polystyrene is prohibited for shipboard use. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Page 40 of 146 Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A 0001 Destination Government N/A Destination Government 1500 N/A 0002 Destination Government N/A Destination Government 2000 N/A 0003 Destination Government N/A Government 2500 N/A Government N/A Government 3000 N/A Government N/A Government 3500 N/A Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246E-246-11 HIGHERH013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-LEVEL CONTRACT H014 INSPECTION AND ACCEPTANCE OF ENGINEERING SERVICES (NAVSEA) (OCT 2018) Item(s) 0001 - Inspection and acceptance shall be made by the Contracting Officer’s Representative (COR) or a designated representative of the Government. (End of Text) E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 0002 - Inspection and acceptance shall be made at destination by a representative of the Government. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H023 QUALITY REQUIREMENT FOR SOFTWARE DEVELOPMENT OR PRODUCTION (DEC 2014)NAVSEA) (JAN 2019) The contractor's software quality program shall be an integral part of the overall Quality Management System. Software quality program controls shall be applicable to all project software that is developed, maintained, or modified within the following categories:
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A Government N/A Government 1500 N/A Government N/A Government 2000 N/A Government N/A Government 2500 N/A Government N/A Government 3000 N/A Government N/A Government 3500 N/A Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 Reimbursement 52.246-8 Alt I Inspection Of Research And Development-Cost APR 1984 Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to the above cited MIL-STD for marking of assorted (related-unrelated) items. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A 0001 Destination Government N/A Destination Government 1500 N/A 0002 Destination Government N/A Destination Government 2000 N/A 0003 Destination Government N/A Destination Government 2500 N/A 0004 Destination Government N/A Destination Government 3000 N/A 0005 Destination Government N/A Destination Government 3500 N/A 0006 Destination Government N/A Destination Government 4000 N/A 0007 Destination Government N/A Destination Government 4500 N/A 0008 Destination Government N/A Destination Government 5000 N/A 0009 Destination Government N/A Destination Government 5500 N/A 0010 Destination Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT 52.246E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) CLIN 0001- 0009 - Inspection and acceptance shall be made at destination by a representative of the Government. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. (End of text) Section F - Deliveries or Performance DELIVERY INFO DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODA AC / CAGE 0001 210 dys. ADC 3 NAVAL SURFACE WARFARE CENTER N00164 CRANE DIV M/F: XXXXXXX XXXXXXXX (BLDG 41) BLDG 41 SE CENTRAL RECEIVING 000 XXX 000 CRANE IN 47522-5001 000-000-0000 FOB: Destination 0002 210 dys. ADC 2 (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0003 210 dys. ADC 32 (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0004 210 dys. after delivery order N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0005 210 dys. after delivery order N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0006 210 dys. after delivery order N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0007 210 dys. after delivery order N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0008 210 dys. after delivery order N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0009 210 dys. after delivery order N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0010 IAW CDRLs. See DD1423 N/A IAW DD1423 N00164 ** Early and/or partial deliveries are acceptable at no additional cost to the Government.** CLAUSES INCORPORATED BY REFERENCE 52.211-11 HIGHERLiquidated Damages--Supplies, Services, or Research and SEP 2000 Development 52.242-LEVEL CONTRACT QUALITY REQUIREMENT 15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991 CLAUSES INCORPORATED BY FULL TEXT F-247-H001 DELIVERY OF DATA (DEC 2014NAVSEA) (OCT 2018) All data to be furnished under this contract shall be delivered prepaid to the destination(s) and at the time(s) specified on the Contract Data Requirements List(s), DD Form 1423. (End of Text) Section G - Contract Administration Data DELIVERY ORDER EVALUATION Each Awardee will be given a fair opportunity to be considered for each delivery order exceeding $3,500.00, IAW FAR 16.505(b)(1). Awardees will be requested to provide a delivery schedule for each requirement under the anticipated contract unless an exception IAW FAR 16.505(b)(2) applies. A maximum delivery schedule is established at the basic contract level in Section F. Pricing is also established at the basic contract level in Section B. A delivery schedule faster than the maximum delivery schedule stated in Section F will be requested for each delivery order. The contractor shall provide a delivery schedule for the machined items being solicited. Single Or Multiple Awards of Delivery Order Line Items: The government reserves the right to award any item or group of items of a proposal. The contractor shall submit a proposal with the appropriate delivery schedule for split awards of line items between the awardees and a single award of all items being solicited. The government will evaluate all delivery schedules for the best overall schedule to the government and make either a single or split award accordingly. Award decisions for delivery orders will be based on the following in descending order of importance: Fastest Schedule for Delivery Dates Acceptable past-performance during post-award Established Price CLAUSES INCORPORATED BY FULL TEXT 252.204-7006 BILLING INSTRUCTIONS (OCT 2005) When submitting a request for payment, the Contractor shall--
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number. Refer to (End of text) D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018) The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the above cited MIL-STD use of yellow wrapping or packaging material is prohibited except where used for marking the containment of assorted (related-unrelated) itemsradioactive material. Loose fill polystyrene is prohibited for shipboard use. (End of text) NOTE: Additional text and/ or additional clauses will be inserted in the DO/TO’s as appropriate. Section E - Inspection and Acceptance NOTE NOTE: Inspection and Acceptance Terms will be inserted in the DO/TO’s as appropriate including specific inspection and acceptance locations. For example, destination/ origin. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: XXXX INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 1000 N/A 0001 Destination Government N/A Destination Government 1500 N/A 0002 Destination Government N/A Destination Government 2000 N/A 0003 Destination Government N/A Government 2500 N/A Government N/A Government 3000 N/A Government N/A Government 3500 N/A Government N/A Government 4000 N/A Government N/A Government 4500 N/A Government N/A Government 5000 N/A Government N/A Government 5500 N/A Government N/A Government 6000 N/A Government N/A Government 6500 N/A Government N/A Government 7000 N/A Government N/A Government 7500 N/A Government N/A Government 8000 N/A Government N/A Destination Government CLAUSES INCORPORATED BY REFERENCE 52.246-3 Inspection Of Supplies Cost-Reimbursement MAY 2001 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-5 Inspection Of Services Cost-Reimbursement APR 1984 52.246-7 Inspection Of Research And Development Fixed Price AUG 1996 52.246-8 Inspection Of Research And Development Cost Reimbursement MAY 2001 52.246-8 Alt I Inspection Of Research And Development-Cost Reimbursement (May 2001) - Alternate I APR 1984 52.246-16 Responsibility For Supplies APR 1984 CLAUSES INCORPORATED BY FULL TEXT E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H016 INSPECTION AND ACCEPTANCE OF F.O.B. DESTINATION DELIVERIES (NAVSEA) (OCT 2018) Item(s) 001-036 - Inspection and acceptance shall be made at destination by a representative of the Government. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018) The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11 HIGHER11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements. (End of text) CLAUSES INCORPORATED BY FULL TEXT E-246-LEVEL H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019) Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative. (End of text) Section F - Deliveries or Performance DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC / CAGE 0001 30-SEP-2019 5 NAVAL SURFACE WARFARE CENTER CRANE DIV M/F: XXXXXXX XXXXXXXXXXXX (BLDG 3330 C) BLDG 41 SE CENTRAL RECEIVING 000 XXX 000 XXXXX XX 00000-5001 812-854-4880 FOB: Destination N00164 0002 6 mths. AOE 25 (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 0003 POP 10-JAN-2020 TO 10-JAN-2022 N/A (SAME AS PREVIOUS LOCATION) FOB: Destination N00164 CLAUSES INCORPORATED BY REFERENCE 52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991 CLAUSES INCORPORATED BY FULL TEXT F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018) All data to be furnished under this contract shall be delivered prepaid to the destination(s) and at the time(s) specified on the Contract Data Requirements List(s), DD Form 1423. (End of Text) Section G - Contract Administration Data CLAUSES INCORPORATED BY FULL TEXT G-242-W001 CONTRACT QUALITY REQUIREMENT ADMINISTRATION FUNCTIONS (DEC 2014NAVSEA) (OCT 2018)
Appears in 1 contract
Samples: imlive.s3.amazonaws.com
