PEMHCA Opt Out. An employee who elects to opt-out of PEMHCA shall forgo the District contribution to the Cafeteria Plan identified in section I.A above.
PEMHCA Opt Out Sample Clauses
Related to PEMHCA Opt Out
Opt Out An employee who is eligible for membership in the USLB may ‘opt out’ for any reason by notifying the USLB in writing of his/her desire to withdraw from the USLB. Employees who opt out of the USLB will remain eligible for membership and may request to be re-enrolled by making a written request to the USLB. Employees who have opted out and request to be re-enrolled must meet the eligibility requirements. Employees who opt out in the fiscal year the initial assessment is made will have that sick leave time returned to them.
Agreement to Buy and Sell Subject to the terms and conditions set forth herein, Seller agrees to sell the Property to Buyer, and Buyer hereby agrees to acquire the Property from Seller.
Agreement to Purchase and Sell Stock Subject to the terms and conditions of this Agreement, the Company agrees to sell to each of the Investors at the Closing (as defined below), and each of the Investors agrees to purchase from the Company at the Closing, the number of shares of the Company's Common Stock set forth opposite such Investor's name on the Schedule of Investors (collectively, the "Shares") at a price of $39.00 per share.
Agreement to Sell and Purchase (a) The Company and each Selling Shareholder hereby agree to sell to each Underwriter, and upon the basis of the representations, warranties and agreements of the Company and the Selling Shareholders herein contained and subject to all the terms and conditions of this Agreement, each Underwriter agrees, severally and not jointly, to purchase from the Company and each Selling Shareholder, at a price of $_____ per share, that number of Firm Shares (rounded up or down as determined by you in your discretion, in order to avoid fractions of a share) obtained by multiplying the number of Firm Shares to be sold by the Company or the number of Firm Shares to be sold by each Selling Shareholder as set forth opposite the name of such Selling Shareholder in Schedule I hereto, as the case may be, by a fraction the numerator of which is the number of Firm Shares set forth opposite the name of each Underwriter in Schedule II hereto (or such number of Firm Shares increased as set forth in Section 9 hereof) and the denominator of which is the total number of Firm Shares. The difference of $_____ per Firm Share between the initial public offering price and the price at which the Company and each Selling Shareholder will sell the Firm Shares to the Underwriter is the "Underwriters' Discount." (b) Subject to all the terms and conditions of this Agreement, the Company hereby grants the Option to the Underwriters to purchase, severally and not jointly, up to 240,000 Option Shares from the Company at the same price per share as the Underwriters shall pay for the Firm Shares. The Option may be exercised only to cover overallotments in the sale of the Firm Shares by the Underwriters and may be exercised in whole or in part at any time (but not more than once) on or before the 30th day after the date of this Agreement upon written or telegraphic notice (the "Option Shares Notice") by the Representatives to the Company no later than 12:00 noon, Charlotte, North Carolina time, at least two and no more than five business days before the date specified for closing in the Option Shares Notice (the "Option Closing Date") setting forth the aggregate number of Option Shares to be purchased and the time and date for such purchase. On the Option Closing Date, the Company will issue and sell to the Underwriters the number of Option Shares set forth in the Option Shares Notice, and each Underwriter will purchase, severally and not jointly, such percentage of the Option Shares as is equal to the percentage of Firm Shares that it is purchasing. (c) Certificates in negotiable form for the Firm Shares to be sold by the Selling Shareholders hereunder have been placed in custody for delivery under this Agreement, under a custody agreement (the "Custody Agreement") made with _________, as custodian (the "Custodian").
Opt-Outs (a) A Class Member who wishes to exclude himself or herself from this Agreement, and from the release of claims and defenses provided for under the terms of this Agreement, shall submit an Exclusion Letter by mail to the Claims Administrator. For an Exclusion Letter to be valid, it must be postmarked on or before the Bar Date to Opt Out. Any Exclusion Letter shall identify the Class Member, state that the Class Member wishes to exclude himself or herself from the Agreement, and shall be signed and dated. (b) The Claims Administrator shall maintain a list of persons who have excluded themselves and shall provide such list to Defendant’s Counsel and Class Counsel at least five (5) days prior to the date Class Counsel is required to file the Motion for Final Approval. The Claims Administrator shall retain the originals of all Exclusion Letters (including the envelopes with the postmarks). The Claims Administrator shall make the original Exclusion Letters available to Class Counsel, Defendant’s Counsel and/or the Court upon two (2) court days’ written notice.
Agreement to Sell 2.1 Vendor hereby agrees to sell to Purchaser such Products and Services as Purchaser may order from time to time by Purchase Order, all in accordance with and subject to the terms, covenants and conditions of this Agreement. Purchaser agrees to purchase those Products and Services ordered by Purchaser by Purchase Order in accordance with and subject to the terms, covenants and conditions of this Agreement. 2.2 Vendor may add additional products and services to the contract provided that any additions reasonably fall within the intent of the original RFP specifications. Pricing on additions shall be equivalent to the percentage discount for other similar products. Vendor may provide a web-link with current product listings, which may be updated periodically, as allowed by the terms of the resulting Master Price Agreement. Vendor may replace or add product lines to an existing contract if the line is replacing or supplementing products on contract, is equal or superior to the original products offered, is discounted in a similar or to a greater degree, and if the products meet the requirements of the solicitation. No products may be added to avoid competitive procurement requirements. LOC may reject any additions without cause. 2.3 All Purchase Orders issued by Purchaser to Vendor for Products during the term (as hereinafter defined) of this Agreement are subject to the provisions of this Agreement as though fully set forth in such Purchase Order. The Vendor retains authority to negotiate above and beyond the terms of this Agreement to meet the Purchaser or Vendor contract requirements. In the event that the provisions of this Agreement conflict with any Purchase Order issued by Purchaser to Vendor, the provisions of this Agreement shall govern. No other terms and conditions, including, but not limited to, those contained in Vendor’s standard printed terms and conditions, on Vendor’s order acknowledgment, invoices or otherwise, shall have any application to or effect upon or be deemed to constitute an amendment to or to be incorporated into this Agreement, any Purchase Order, or any transactions occurring pursuant hereto or thereto, unless this Agreement shall be specifically amended to adopt such other terms and conditions in writing by the Parties. 2.4 Notwithstanding any other provision of this Agreement to the contrary, the Lead Contracting Agency shall have no obligation to order or purchase any Products and Services hereunder and the placement of any Purchase Order shall be in the sole discretion of the Participating Agencies. This Agreement is not exclusive. Vendor expressly acknowledges and agrees that Purchaser may purchase at its sole discretion, Products and Services that are identical or similar to the Products and Services described in this Agreement from any third party. 2.5 In case of any conflict or inconsistency between any of the Contract Documents, the documents shall prevail and apply in the following order of priority: (i) This Agreement; (ii) The RFP; (iii) Vendor’s Proposal; 2.6 Extension of contract terms to Participating Agencies: 2.6.1 Vendor agrees to extend the same terms, covenants and conditions available to Purchaser under this Agreement to Participating Agencies, that have executed an Intergovernmental Cooperative Purchasing Agreement (“IGA”) as may be required by each Participating Agency’s local laws and regulations, in accordance with Attachment C. Each Participating Agency will be exclusively responsible for and deal directly with Vendor on matters relating to ordering, delivery, inspection, acceptance, invoicing, and payment for Products and Services in accordance with the terms and conditions of this Agreement as if it were “Purchaser” hereunder. Any disputes between a Participating Agency and Vendor will be resolved directly between them under and in accordance with the laws of the State in which the Participating Agency exists. Pursuant to the IGA, the Lead Contracting Agency shall not incur any liability as a result of the access and utilization of this Agreement by other Participating Agencies. 2.6.2 This Solicitation meets the public contracting requirements of the Lead Contracting Agency and may not be appropriate under or meet Participating Agencies’ procurement laws. Participating Agencies are urged to seek independent review by their legal counsel to ensure compliance with all local and state solicitation requirements. 2.6.3 Vendor acknowledges execution of a Vendor Administration Fee Agreement with NPPGov, pursuant to the terms of the RFP. 2.7 Oregon Public Agencies are prohibited from use of Products and Services offered under this Agreement that are already provided by qualified nonprofit agencies for disabled individuals as listed on the Department of Administrative Service’s Procurement List (“Procurement List”) pursuant to ORS 279.835-.855. See xxx.XxxxxxXxxxxxxxxxxxxx.xxx/xxx for more information. Vendor shall not sell products and services identified on the Procurement List (e.g., reconditioned toner cartridges) to Purchaser or Participating Agencies within the state of Oregon.
Freedom to Trade in Company Securities The Rights Agent and any stockholder, director, officer or employee of the Rights Agent may buy, sell or deal in any of the Rights or other securities of the Company or become pecuniarily interested in any transaction in which the Company may be interested, or contract with or lend money to the Company or otherwise act as fully and freely as though it were not Rights Agent under this Agreement. Nothing herein shall preclude the Rights Agent from acting in any other capacity for the Company or for any other legal entity.
Agreement to Sell and Contribute on the Closing Date On the terms and subject to the conditions set forth in this Agreement, Santander Consumer does hereby irrevocably sell, transfer, assign, contribute and otherwise convey to the Purchaser without recourse (subject to the obligations herein) on the Closing Date all of Santander Consumer’s right, title and interest in, to and under the Receivables, the Collections after the Cut-Off Date, the Receivable Files and the Related Security relating thereto, whether now owned or hereafter acquired, as evidenced by an assignment substantially in the form of Exhibit A delivered on the Closing Date (collectively, the “Purchased Assets”). The sale, transfer, assignment, contribution and conveyance made hereunder does not constitute and is not intended to result in an assumption by the Purchaser of any obligation of the Originator to the Obligors, the Dealers, insurers or any other Person in connection with the Receivables or the other assets and properties conveyed hereunder or any agreement, document or instrument related thereto.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
