Common use of Personnel of the Contractor Clause in Contracts

Personnel of the Contractor. All employees whom the Contractor proposes to engage to perform the work should not have adverse health conditions to fulfill their duties in accordance with the requirements of the legislation of the Russian Federation. Before starting work under the Agreement, the personnel of the Contractor, including the subcontractor, should undergo an induction briefing on occupation health, familiarization with the internal procedures of the Customer regarding the occupation health and industrial safety, as well as environmental aspects of activities of the Contractor on the territory of the Holcim Russia Group as the Customer. Induction briefing is performed only upon submission of documents in accordance with the list in Clause 2.1.2. After the briefings, the representative of the Customer signs the application of the Contractor, on basis of which the employee of Security Service of the Customer issues a pass card of the established form. While on the territory of the Customer, the workers of the Contractor should have a graphic sign of their company on a protective helmet or in a visible area of clothing, and also have a pass card issued by an authorized representative of the Holcim Russia Group. The scope of training required for the workers of the Contractor depends on the type of work performed and is established by the Customer. If necessary, the Customer may perform additional briefings with the workers of the Contractor regarding the compliance with internal documentation on the prevention of accidents and emergency situations that are in force on the territory of the Customer. If the Customer reveals insufficient competence, professional knowledge, and skills of employees of the Contractor, then the Customer has the right to require the Contractor to perform an extraordinary knowledge testing or replace the employee. Contractor shall ensure that all personnel of the Contractor and its subcontractors engaged in the performance of the work, maintain their workplaces in the proper order and as clean as possible under the given conditions in order to reduce the risk of personal injury, property damage and delays in the performance of the work. Unless other conditions are stipulated by the Agreement, the Contractor shall independently arrange sanitary conditions for its workers (amenity premises, toilets, meals). While on the territory of the Customer, the personnel of the Contractor and the engaged subcontractors are prohibited to go beyond the boundaries of the territory allotted to the Contractor for performing of work. If a responsibility assignment matrix is not provided, then the personnel of the Contractor are obliged to move around the territory of the Customer only for needs established by their duty obligations. In this case, entry to the existing production and work areas is permitted only by prior agreement obtained from the Coordinator of the Customer. The Customer has the right to object to the engagement for performing the work or to block access to its territory for the workers of the Contractor, its subcontractors, as well as to demand their dismissal from the work, and the Contractor is obliged to dismiss the workers from the work if such workers violate the regulations of occupational health, industrial safety, fire safety and environmental protection established by the legislation of the Russian Federation, this Agreement, show unacceptable behavior, show incompetence or negligence in the performance of their duties. 3.1.1. To perform work under the Agreement, the Contractor appoints the person responsible for compliance with the regulations of occupational health, industrial safety, fire safety and environmental protection, which should be in the territory of the work during the working time along entire term of the Agreement. This person should have the qualifications necessary to perform this work, and also have the authority to give directions and take measures to prevent the consequences of non-compliance with the requirements of occupational health, industrial safety, fire safety and environmental protection, to sign Certificates of Violations Revealed, as well as perform the necessary trainings, briefings, and prepare Reports on occupational health, industrial safety, fire safety and environmental protection, to perform production supervision and have other powers necessary to fulfill its duties. In case of performance of work on the territory of the Customer by the personnel of the Contractor consisting of 50 or more workers, the Contractor is obliged to ensure the permanent presence on the territory of the Customer of an occupational health specialist (specialists) with the appropriate qualifications. 3.1.2. The Contractor guarantees that its workers, workers of its subcontractors, and, if necessary, workers of its suppliers and sub-suppliers are familiar with the requirements set forth in this Agreement and are comply with them. 3.1.3. In case several Contracting Organizations are located on the territory of the work, the Contractor should agree with the Coordinator of the Customer additional measures on occupational health, industrial safety, fire safety and environmental protection to ensure safety during performing the related work. 3.1.4. Contractor is obliged to issue a permit to work before performing the following hazardous types of work: - Work with the use of lifting mechanisms and other construction machines in the secured areas of overhead power transmission lines, gas and oil pipelines, product pipelines, warehouses of flammable or combustible liquids, combustible or liquefied gases; - Electric welding and gas welding work outside permanent welding stations at temporary places; - Gas hazardous work; - Hot work of all types inside industrial premises, in material warehouses at the areas for storage of fuels and lubricants and other combustible materials; - Preparatory, cleaning, lining, inspection and repair work related to the presence of workers in bunkers, drying drums, gas ducts, xxxxx, xxxxx (raw materials and cement xxxxx), dust xxxxxxxx, rotary kilns, silos, filters, refrigerators, aspiration shafts, sludge pools, storage tanks for fuels and lubricants and in other closed tanks, pits and hard-to-reach spaces; - Work with combustible heat insulators; - Earthworks in the secured areas of underground electric networks, gas pipelines, oil pipelines, water supply and sanitation systems and other utilities; - Work with the use of caustic, poisonous, explosive substances; - Work on the dismantling of buildings, structures; - Work at heights near unfenced height differences of 1.8 m and more; - Work in a confined space; - In other cases established by legislation requirements and the Customer’s requirements. In the event of a change in the conditions for the performing of work, the permit to work is canceled, and work performing is allowed only after making changes to the risk assessment form and issuing a new permit to work. In the risk assessment, construction arrangement plan and method statement, it is necessary to indicate specific safety measures that will be used when performing this work with reference to specific conditions and place. 3.1.5. It is prohibited to use communications (electricity, water, compressed air, etc.) without the written permission of an authorized representative of the Customer. Switching the process equipment on and off should be performed by the personnel of Customer after receiving a written request from the authorized representative of the Contractor. 3.1.6. The Contractor should equip all places of work with collective protective equipment, safety signs (warning, prohibiting, indicating, prescribing), as well as fire protection equipment (fire extinguishers) where necessary, in accordance with the requirements of the legislation of the Russian Federation and this Agreement.

Appears in 1 contract

Samples: Accession Agreement

AutoNDA by SimpleDocs

Personnel of the Contractor. All employees whom the Contractor proposes to engage to perform the work should not have adverse health conditions to fulfill their duties in accordance with the requirements of the legislation of the Russian Federation. Before starting work under the Agreement, the personnel of the Contractor, including the subcontractor, should undergo an induction briefing on occupation health, familiarization provide a Familiarization with the internal procedures of the Customer regarding the occupation health and industrial safetyLocal HSE Regulations/Policies/Provisions/Procedures, as well as environmental aspects of activities of the Contractor Cementum Group on the territory of the Holcim Russia Group as the Customer, and undergo an induction briefing on occupation health. Induction briefing is performed only upon submission of documents in accordance with the list in Clause 2.1.2. After the briefings, the representative of the Customer signs the application of the Contractor, on basis of which the employee of Security Service of the Customer issues a pass card of the established form. While on the territory of the Customer, the workers of the Contractor should have a graphic sign of their company on a protective helmet or in a visible area of clothing, and also have a pass card issued by an authorized representative of the Holcim Russia Customer of the Cementum Group. The scope of training required for the workers of the Contractor depends on the type of work performed and is established by the Customer. If necessary, the Customer may perform additional briefings with the workers of the Contractor regarding the compliance with internal documentation on the prevention of accidents and emergency situations that are in force on the territory of the Customer. If the Customer reveals insufficient competence, professional knowledge, and skills of employees of the Contractor, then the Customer has the right to require the Contractor to perform an extraordinary knowledge testing or replace the employee. Contractor shall ensure that all personnel of the Contractor and its subcontractors engaged in the performance of the work, maintain their workplaces in the proper order and as clean as possible under the given conditions in order to reduce the risk of personal injury, property damage and delays in the performance of the work. Unless other conditions are stipulated by the Agreement, the Contractor shall independently arrange sanitary conditions for its workers (amenity premises, toilets, meals). While on the territory of the Customer, the personnel of the Contractor and the engaged subcontractors are prohibited to go beyond the boundaries of the territory allotted to the Contractor for performing of work. If a responsibility assignment matrix is not provided, then the personnel of the Contractor are obliged to move around the territory of the Customer only for needs established by their duty obligations. In this case, entry to the existing production and work areas is permitted only by prior agreement obtained from the Coordinator of the Customer. The Customer has the right to object to the engagement for performing the work or to block access to its territory for the workers of the Contractor, its subcontractors, as well as to demand their dismissal from the work, and the Contractor is obliged to dismiss the workers from the work if such workers violate the regulations of occupational health, industrial safety, fire safety and environmental protection established by the legislation of the Russian Federation, this Agreement, show unacceptable behavior, show incompetence or negligence in the performance of their duties. 3.1.1. To perform work under the Agreement, the Contractor appoints the person responsible for compliance with the regulations of occupational health, industrial safety, fire safety and environmental protection, which should be in the territory of the work during the working time along entire term of the AgreementAgreement (manager, contractor/performer or person designated as responsible at the time of their absence). This person should have the qualifications necessary to perform this work, and also have the authority to give directions and take measures to prevent the consequences of non-compliance with the requirements of occupational health, industrial safety, fire safety and environmental protection, to sign Certificates of Violations Revealed, as well as perform the necessary trainings, briefings, and prepare Reports on occupational health, industrial safety, fire safety and environmental protection, to perform production supervision and have other powers necessary to fulfill its duties. In case of performance of work on the territory of the Customer by the personnel of the Contractor consisting of 50 or more workers, the Contractor is obliged to ensure the permanent presence on the territory of the Customer of an occupational health specialist (specialists) with the appropriate qualifications. 3.1.2. The Contractor guarantees that its workers, workers of its subcontractors, and, if necessary, workers of its suppliers and sub-suppliers are familiar with the requirements set forth in this Agreement and are comply with them. 3.1.3. In case several Contracting Organizations are located on the territory of the work, the Contractor should agree with the Coordinator of the Customer additional measures on occupational health, industrial safety, fire safety and environmental protection to ensure safety during performing the related work. 3.1.4. Contractor is obliged to issue a permit to work before performing the following hazardous types of work: - Work work in accordance with the use of lifting mechanisms and other construction machines in the secured areas of overhead power transmission lines, gas and oil pipelines, product pipelines, warehouses of flammable or combustible liquids, combustible or liquefied gases; - Electric welding and gas welding work outside permanent welding stations at temporary places; - Gas hazardous work; - Hot work of all types inside industrial premises, in material warehouses at the areas for storage of fuels and lubricants and other combustible materials; - Preparatory, cleaning, lining, inspection and repair work related to the presence of workers in bunkers, drying drums, gas ducts, xxxxx, xxxxx (raw materials and cement xxxxx), dust xxxxxxxx, rotary kilns, silos, filters, refrigerators, aspiration shafts, sludge pools, storage tanks for fuels and lubricants and in other closed tanks, pits and hard-to-reach spaces; - Work with combustible heat insulators; - Earthworks in the secured areas of underground electric networks, gas pipelines, oil pipelines, water supply and sanitation systems and other utilities; - Work with the use of caustic, poisonous, explosive substances; - Work “Regulations on the dismantling Organization of buildings, structures; - Work at heights near unfenced height differences of 1.8 m Hazardous Work” developed and more; - Work in a confined space; - In other cases established approved by legislation requirements and the Customer’s requirements. In the event of a change in the conditions for the performing of work, the permit to work is canceled, and work performing is allowed only after making changes to the risk assessment form and issuing a new permit to work. In the risk assessment, construction arrangement plan and method statement, it is necessary to indicate specific safety measures that will be used when performing this work with reference to specific conditions and place. 3.1.5. It is prohibited to use communications (electricity, water, compressed air, etc.) without the written permission of an authorized representative of the Customer. Switching the process equipment on and off should be performed by the personnel of Customer after receiving a written request from the authorized representative of the Contractor. 3.1.6. The Contractor should equip all places of work with collective protective equipment, safety signs (warning, prohibiting, indicating, prescribing), as well as fire protection equipment (fire extinguishers) where necessary, in accordance with the requirements of the legislation of the Russian Federation and this Agreement. 3.1.7. When performing handling and cargo placement operations, it is obligatory to follow the Order of the Ministry of Labor of the Russian Federation No. 753n “On Approval of Occupational Safety Rules for Handling and Placement of Cargoes” dated October 28, 2020.

Appears in 1 contract

Samples: Accession Agreement

Personnel of the Contractor. All employees whom the Contractor proposes to engage to perform the work should not have adverse health conditions to fulfill their duties in accordance with the requirements of the legislation of the Russian Federation. Before starting work under the Agreement, the personnel of the Contractor, including the subcontractor, should undergo an induction briefing on occupation health, familiarization with the internal procedures of the Customer regarding the occupation health and industrial safety, as well as environmental aspects of activities of the Contractor on the territory of the Holcim LafargeHolcim Russia Group as the Customer. Induction briefing is performed only upon submission of documents in accordance with the list in Clause 2.1.2. After the briefings, the representative of the Customer signs the application of the Contractor, on basis of which the employee of Security Service of the Customer issues a pass card of the established form. While on the territory of the Customer, the workers of the Contractor should have a graphic sign of their company on a protective helmet or in a visible area of clothing, and also have a pass card issued by an authorized representative of the Holcim LafargeHolcim Russia Group. The scope of training required for the workers of the Contractor depends on the type of work performed and is established by the Customer. If necessary, the Customer may perform additional briefings with the workers of the Contractor regarding the compliance with internal documentation on the prevention of accidents and emergency situations that are in force on the territory of the Customer. If the Customer reveals insufficient competence, professional knowledge, and skills of employees of the Contractor, then the Customer has the right to require the Contractor to perform an extraordinary knowledge testing or replace the employee. Contractor shall ensure that all personnel of the Contractor and its subcontractors engaged in the performance of the work, maintain their workplaces in the proper order and as clean as possible under the given conditions in order to reduce the risk of personal injury, property damage and delays in the performance of the work. Unless other conditions are stipulated by the Agreement, the Contractor shall independently arrange sanitary conditions for its workers (amenity premises, toilets, meals). While on the territory of the Customer, the personnel of the Contractor and the engaged subcontractors are prohibited to go beyond the boundaries of the territory allotted to the Contractor for performing of work. If a responsibility assignment matrix is not provided, then the personnel of the Contractor are obliged to move around the territory of the Customer only for needs established by their duty obligations. In this case, entry to the existing production and work areas is permitted only by prior agreement obtained from the Coordinator of the Customer. The Customer has the right to object to the engagement for performing the work or to block access to its territory for the workers of the Contractor, its subcontractors, as well as to demand their dismissal from the work, and the Contractor is obliged to dismiss the workers from the work if such workers violate the regulations of occupational health, industrial safety, fire safety and environmental protection established by the legislation of the Russian Federation, this Agreement, show unacceptable behavior, show incompetence or negligence in the performance of their duties. 3.1.1. To perform work under the Agreement, the Contractor appoints the person responsible for compliance with the regulations of occupational health, industrial safety, fire safety and environmental protection, which should be in the territory of the work during the working time along entire term of the Agreement. This person should have the qualifications necessary to perform this work, and also have the authority to give directions and take measures to prevent the consequences of non-compliance with the requirements of occupational health, industrial safety, fire safety and environmental protection, to sign Certificates of Violations Revealed, as well as perform the necessary trainings, briefings, and prepare Reports on occupational health, industrial safety, fire safety and environmental protection, to perform production supervision and have other powers necessary to fulfill its duties. In case of performance of work on the territory of the Customer by the personnel of the Contractor consisting of 50 or more workers, the Contractor is obliged to ensure the permanent presence on the territory of the Customer of an occupational health specialist (specialists) with the appropriate qualifications. 3.1.2. The Contractor guarantees that its workers, workers of its subcontractors, and, if necessary, workers of its suppliers and sub-suppliers are familiar with the requirements set forth in this Agreement and are comply with them. 3.1.3. In case several Contracting Organizations are located on the territory of the work, the Contractor should agree with the Coordinator of the Customer additional measures on occupational health, industrial safety, fire safety and environmental protection to ensure safety during performing the related work. 3.1.4. Contractor is obliged to issue a permit to work before performing the following hazardous types of work: - Work with the use of lifting mechanisms and other construction machines in the secured areas of overhead power transmission lines, gas and oil pipelines, product pipelines, warehouses of flammable or combustible liquids, combustible or liquefied gases; - Electric welding and gas welding work outside permanent welding stations at temporary places; - Gas hazardous work; - Hot work of all types inside industrial premises, in material warehouses at the areas for storage of fuels and lubricants and other combustible materials; - Preparatory, cleaning, lining, inspection and repair work related to the presence of workers in bunkers, drying drums, gas ducts, xxxxx, xxxxx (raw materials and cement xxxxx), dust xxxxxxxx, rotary kilns, silos, filters, refrigerators, aspiration shafts, sludge pools, storage tanks for fuels and lubricants and in other closed tanks, pits and hard-to-reach spaces; - Work with combustible heat insulators; - Earthworks in the secured areas of underground electric networks, gas pipelines, oil pipelines, water supply and sanitation systems and other utilities; - Work with the use of caustic, poisonous, explosive substances; - Work on the dismantling of buildings, structures; - Work at heights near unfenced height differences of 1.8 m and more; - Work in a confined space; - In other cases established by legislation requirements and the Customer’s requirements. In the event of a change in the conditions for the performing of work, the permit to work is canceled, and work performing is allowed only after making changes to the risk assessment form and issuing a new permit to work. In the risk assessment, construction arrangement plan and method statement, it is necessary to indicate specific safety measures that will be used when performing this work with reference to specific conditions and place. 3.1.5. It is prohibited to use communications (electricity, water, compressed air, etc.) without the written permission of an authorized representative of the Customer. Switching the process equipment on and off should be performed by the personnel of Customer after receiving a written request from the authorized representative of the Contractor. 3.1.6. The Contractor should equip all places of work with collective protective equipment, safety signs (warning, prohibiting, indicating, prescribing), as well as fire protection equipment (fire extinguishers) where necessary, in accordance with the requirements of the legislation of the Russian Federation and this Agreement.

Appears in 1 contract

Samples: Compliance Agreement

AutoNDA by SimpleDocs

Personnel of the Contractor. All employees whom the Contractor proposes to engage to perform the work should not have adverse health conditions to fulfill their duties in accordance with the requirements of the legislation of the Russian Federation. Before starting work under the Agreement, the personnel of the Contractor, including the subcontractor, should undergo an induction briefing on occupation health, familiarization with the internal procedures of the Customer regarding the occupation health and industrial safety, as well as environmental aspects of activities of the Contractor on the territory of the Holcim LafargeHolcim Russia Group as the Customer. Induction briefing is performed only upon submission of documents in accordance with the list in Clause 2.1.2. After the briefings, the representative of the Customer signs the application of the Contractor, on basis of which the employee of Security Service of the Customer issues a pass card of the established form. While on the territory of the Customer, the workers of the Contractor should have a graphic sign of their company on a protective helmet or in a visible area of clothing, and also have a pass card issued by an authorized representative of the Holcim LafargeHolcim Russia Group. The scope of training required for the workers of the Contractor depends on the type of work performed and is established by the Customer. If necessary, the Customer may perform additional briefings with the workers of the Contractor regarding the compliance with internal documentation on the prevention of accidents and emergency situations that are in force on the territory of the Customer. If the Customer reveals insufficient competence, professional knowledge, and skills of employees of the Contractor, then the Customer has the right to require the Contractor to perform an extraordinary knowledge testing or replace the employee. Contractor shall ensure that all personnel of the Contractor and its subcontractors engaged in the performance of the work, maintain their workplaces in the proper order and as clean as possible under the given conditions in order to reduce the risk of personal injury, property damage and delays in the performance of the work. Unless other conditions are stipulated by the Agreement, the Contractor shall independently arrange sanitary conditions for its workers (amenity premises, toilets, meals). While on the territory of the Customer, the personnel of the Contractor and the engaged subcontractors are prohibited to go beyond the boundaries of the territory allotted to the Contractor for performing of work. If a responsibility assignment matrix is not provided, then the personnel of the Contractor are obliged to move around the territory of the Customer only for needs established by their duty obligations. In this case, entry to the existing production and work areas is permitted only by prior agreement obtained from the Coordinator of the Customer. The Customer has the right to object to the engagement for performing the work or to block access to its territory for the workers of the Contractor, its subcontractors, as well as to demand their dismissal from the work, and the Contractor is obliged to dismiss the workers from the work if such workers violate the regulations of occupational health, industrial safety, fire safety and environmental protection established by the legislation of the Russian Federation, this Agreement, show unacceptable behavior, show incompetence or negligence in the performance of their duties. 3.1.1. To perform work under the Agreement, the Contractor appoints the person responsible for compliance with the regulations of occupational health, industrial safety, fire safety and environmental protection, which should be in the territory of the work during the working time along entire term of the Agreement. This person should have the qualifications necessary to perform this work, and also have the authority to give directions and take measures to prevent the consequences of non-compliance with the requirements of occupational health, industrial safety, fire safety and environmental protection, to sign Certificates of Violations Revealed, as well as perform the necessary trainings, briefings, and prepare Reports on occupational health, industrial safety, fire safety and environmental protection, to perform production supervision and have other powers necessary to fulfill its duties. In case of performance of work on the territory of the Customer by the personnel of the Contractor consisting of 50 or more workers, the Contractor is obliged to ensure the permanent presence on the territory of the Customer of an occupational health specialist (specialists) with the appropriate qualifications. 3.1.2. The Contractor guarantees that its workers, workers of its subcontractors, and, if necessary, workers of its suppliers and sub-suppliers are familiar with the requirements set forth in this Agreement and are comply with them. 3.1.3. In case several Contracting Organizations are located on the territory of the work, the Contractor should agree with the Coordinator of the Customer additional measures on occupational health, industrial safety, fire safety and environmental protection to ensure safety during performing the related work. 3.1.4. Contractor is obliged to issue a permit to work before performing the following hazardous types of work: - Work with the use of lifting mechanisms and other construction machines in the secured areas of overhead power transmission lines, gas and oil pipelines, product pipelines, warehouses of flammable or combustible liquids, combustible or liquefied gases; - Electric welding and gas welding work outside permanent welding stations at temporary places; - Gas hazardous work; - Hot work of all types inside industrial premises, in material warehouses at the areas for storage of fuels and lubricants and other combustible materials; - Preparatory, cleaning, lining, inspection and repair work related to the presence of workers in bunkers, drying drums, gas ducts, xxxxx, xxxxx (raw materials and cement xxxxx), dust xxxxxxxx, rotary kilns, silos, filters, refrigerators, aspiration shafts, sludge pools, storage tanks for fuels and lubricants and in other closed tanks, pits and hard-to-reach spaces; - Work with combustible heat insulators; - Earthworks in the secured areas of underground electric networks, gas pipelines, oil pipelines, water supply and sanitation systems and other utilitiessystems; - Work with the use of caustic, poisonous, explosive substances; - Work on the dismantling of buildings, structures; - Work at heights near unfenced height differences of 1.8 m and more; - Work in a confined space; - In other cases established by legislation requirements and the Customer’s requirements. In the event of a change in the conditions for the performing of work, the permit to work is canceled, and work performing is allowed only after making changes to the risk assessment form and issuing a new permit to work. In the risk assessment, construction arrangement plan and method statement, it is necessary to indicate specific safety measures that will be used when performing this work with reference to specific conditions and place. 3.1.5. It is prohibited to use communications (electricity, water, compressed air, etc.) without the written permission of an authorized representative of the Customer. Switching the process equipment on and off should be performed by the personnel of Customer after receiving a written request from the authorized representative of the Contractor. 3.1.6. The Contractor should equip all places of work with collective protective equipment, safety signs (warning, prohibiting, indicating, prescribing), as well as fire protection equipment (fire extinguishers) where necessary, in accordance with the requirements of the legislation of the Russian Federation and this Agreement.

Appears in 1 contract

Samples: Accession Agreement

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!