Work Environment It is mutually agreed that the prevention of accidents and injuries to state employees will result in greater efficiency of operations of state government. Toward this end, the Employer shall make every reasonable effort to provide and maintain safe and healthy working conditions and the Union shall fully cooperate by encouraging all employees to perform their assigned tasks in a safe manner.
Working Environment The Parties agree that a safe and clean working environment is essential in order to carry out work assignments in a satisfactory manner. It will be the Employer's responsibility to ensure that all working areas and Employer-owned vehicles are maintained in a safe and clean condition.
O.S.H.A. and Environmental Compliance (a) Except as could not reasonably be expected, individually or in the aggregate, to have a Material Adverse Effect, each Borrower has duly complied with, and its facilities, business, assets, property, leaseholds, Real Property and Equipment are in compliance in all material respects with, the provisions of the Federal Occupational Safety and Health Act, the Environmental Protection Act, RCRA and all other Environmental Laws; there have been no outstanding citations, notices or orders of non-compliance issued to any Borrower or relating to its business, assets, property, leaseholds or Equipment under any such laws, rules or regulations.
(b) Except as could not reasonably be expected, individually or in the aggregate, to have a Material Adverse Effect, each Borrower has been issued all required federal, state and local licenses, certificates or permits relating to all applicable Environmental Laws.
(i) There are no visible signs of material releases, spills, discharges, leaks or disposal (collectively referred to as “Releases”) of Hazardous Substances at, upon, under or within any Real Property including any premises leased by any Borrower; (ii) to the best knowledge of Borrowers, there are no underground storage tanks or polychlorinated biphenyls on the Real Property including any premises leased by any Borrower, (iii) to the best knowledge of Borrowers, the Real Property including any premises leased by any Borrower has never been used as a treatment, storage or disposal facility of Hazardous Waste; and (iv) to the best knowledge of Borrowers, no Hazardous Substances are present on the Real Property including any premises leased by any Borrower, excepting such quantities as are handled in accordance with all applicable manufacturer’s instructions and governmental regulations and in proper storage containers and as are necessary for the operation of the commercial business of any Borrower or of its tenants.
Compliance with Environmental Laws; Environmental Reports (a) Comply and use commercially reasonable efforts to cause all lessees and other persons occupying Real Property owned or operated by any Company to comply, in all material respects with all Environmental Laws and Environmental Permits applicable to its operations and property and obtain and renew all material Environmental Permits applicable to its operations and property and conduct any Response in accordance with Environmental Laws; provided, however, that no Company shall be required to undertake any Response to the extent that its obligation to do so is being contested in good faith and by proper proceedings and appropriate reserves are being maintained with respect to such circumstances in accordance with GAAP.
(b) If a Default caused by reason of a breach of Section 3.17 or Section 5.09(a) shall have occurred and be continuing for more than 20 Business Days without the Companies commencing activities reasonably likely to cure such Default, at the written request of the Required Lenders through the Administrative Agent, provide to the Lenders within 45 days after such request, at the expense of Borrower, an environmental site assessment report regarding the matters which are the subject of such default, including where appropriate, any soil and/or groundwater sampling, prepared by an environmental consulting firm and in form and substance reasonably acceptable to the Administrative Agent and indicating the presence or absence of Hazardous Materials and the estimated cost of any compliance or Response to address them in connection with such Default.
Environmental Site Assessment Perform in accordance with the City Design Manual and other City requirements as designated in writing by the Director.
Environmental Compliance and Reports Borrower shall comply in all respects with any and all Environmental Laws; not cause or permit to exist, as a result of an intentional or unintentional action or omission on Borrower’s part or on the part of any third party, on property owned and/or occupied by Borrower, any environmental activity where damage may result to the environment, unless such environmental activity is pursuant to and in compliance with the conditions of a permit issued by the appropriate federal, state or local governmental authorities; shall furnish to Lender promptly and in any event within thirty (30) days after receipt thereof a copy of any notice, summons, lien, citation, directive, letter or other communication from any governmental agency or instrumentality concerning any intentional or unintentional action or omission on Borrower’s part in connection with any environmental activity whether or not there is damage to the environment and/or other natural resources. Additional Assurances. Make, execute and deliver to Lender such promissory notes, mortgages, deeds of trust, security agreements, assignments, financing statements, instruments, documents and other agreements as Lender or its attorneys may reasonably request to evidence and secure the Loans and to perfect all Security Interests.
Responsibility for Environmental Contamination 5.20.1 Neither Party shall be liable to the other for any costs whatsoever resulting from the presence or release of any Environmental Hazard that either Party did not introduce to the affected Work Location. Both Parties shall defend and hold harmless the other, its officers, directors and employees from and against any losses, damages, claims, demands, suits, liabilities, fines, penalties and expenses (including reasonable attorneys' fees) that arise out of or result from (i) any Environmental Hazard that the Indemnifying Party, its contractors or agents introduce to the Work Locations or (ii) the presence or release of any Environmental Hazard for which the Indemnifying Party is responsible under Applicable Law.
5.20.2 In the event any suspect materials within Qwest-owned, operated or leased facilities are identified to be asbestos containing, CLEC will ensure that to the extent any activities which it undertakes in the facility disturb such suspect materials, such CLEC activities will be in accordance with applicable local, state and federal environmental and health and safety statutes and regulations. Except for abatement activities undertaken by CLEC or equipment placement activities that result in the generation of asbestos-containing material, CLEC does not have any responsibility for managing, nor is it the owner of, nor does it have any liability for, or in connection with, any asbestos-containing material. Qwest agrees to immediately notify CLEC if Qwest undertakes any asbestos control or asbestos abatement activities that potentially could affect CLEC personnel, equipment or operations, including, but not limited to, contamination of equipment.
Environmental Studies Promptly conduct and complete, at Borrower’s expense, all such investigations, studies, samplings and testings as may be requested by Lender or any governmental authority relative to any substance, or any waste or by-product of any substance defined as toxic or a hazardous substance under applicable federal, state, or local law, rule, regulation, order or directive, at or affecting any property or any facility owned, leased or used by Borrower.
Smoke Free Environment The Lessor shall make all parts of the leased premise smoke-free. "
Phase II A small portion of the work for the Phase II modifications to the Plattsburgh Substation will be performed by Transmission Owner, and the remainder will be performed by Clinton and Xxxxxxxxx. A detailed definition of the specific scope for Transmission Owner and Clinton and Xxxxxxxxx including interface points shall be defined during the design phase and, as such documents become available, copies will be delivered to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The full scope includes the installation of wave traps, CCVT’s and modifications and/or additions to relaying on the MWP-1 and MWP- 2 lines. These lines will be reconfigured at the completion of Phase II to connect to Xxxxx and Xxxxxxx Substations on MWP-1 and the Xxxx Substation on MWP-2. Clinton and Xxxxxxxxx will design the upgrades and purchase the materials based on the outline specification that was prepared and issued by Transmission Owner. The work to be performed by Clinton and Xxxxxxxxx will include both the materials for the exterior and interior installations and items for Transmission Owner installation inside the control building in existing relay panels and communication racks. In addition, Clinton and Xxxxxxxxx will be responsible for the exterior and interior construction work and will provide construction management services in coordination with Transmission Owner. The civil design for the foundations and the electrical design for the cable runs to the control room will be designed by, as approved by Transmission Owner, and installed under the supervision and control of Clinton and Xxxxxxxxx. The equipment will be selected and procured in accordance with the specifications developed during the detailed engineering phase, copies of which shall be furnished to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The construction of the foundations, structures, wave traps, CCTV and cable runs into the control building to the termination cabinets will be completed by Clinton and Xxxxxxxxx. The work at the Plattsburgh Substation will be installed under Transmission Owner’s CPP-1. Transmission Owner will provide Protection and Controls Engineering, install and terminate wiring from the termination cabinets to the control panels and relays, install relays and equipment in the existing panels, and will commission such work inside the 230kV control building. Transmission Owner will develop the communications protocols and data flow over the circuits.
