TERMINATION AND MODIFICATION 271 - This Agreement shall continue in full force and effect from the date hereof until 11:59 p.m., June 30, 2002, and from year to year thereafter unless notice of termination or modification is given as provided in Paragraphs 273, 274, and 275 below. 272 - If either party desires to terminate this Agreement, it shall, sixty (60) days prior to the termination date, give written notice of termination. If neither party shall give notice of termination of this Agreement as provided in this paragraph or notice of amendment, as hereinafter provided, or if each party giving a notice of termination withdraws the same prior to termination date, this Agreement shall continue in effect from year to year thereafter subject to notice of termination by either party on sixty (60) days written notice prior to the current year's termination date. 273 - If either party desires to modify or change this Agreement, it shall sixty (60) days prior to the termination date or any subsequent termination date, give written notice of amendment in which event the notice of amendment shall set forth the nature of the amendment or amendments desired. If notice of amendment of this Agreement has been given in accordance with this paragraph, this Agreement may be terminated by either party on ten (10) days written notice of termination but not before the effective termination date of this Agreement. Any amendments that may be agreed upon shall become and be a part of this Agreement without modifying or changing any of the other terms of this Agreement. 274 - Notice of Termination Modification. Notice shall be in writing and shall be sufficient if sent by certified mail addressed to the Union, and if to the Employer, addressed to Director, Employee Relations, or to any such address as the Union or the Employer may make available to each other. 275 - This Agreement shall be effective from and after July 1, 1999, until and including June 30, 2002, with respect to all provisions of this Agreement.
Integration and Modification This Agreement sets forth the entire understanding and agreement of the Parties with respect to the subject matter of this Agreement and supersedes all prior agreements, understandings, negotiations, and communications, whether oral or written, with respect to such subject matter. Neither this Agreement, nor any provision or term of this Agreement, may be amended, modified, revoked, supplemented, waived, or otherwise changed except by a writing signed by all of the Parties.
Term, Termination and Modification This Agreement is effective for the time period indicated on Appendix A, unless sooner terminated as provided below in this Paragraph. This Agreement may be terminated by mutual agreement of the parties at any time or by the Registrant on behalf of any one or more of the Funds upon thirty (30) days’ written notice to the Adviser. In addition, this Agreement shall terminate with respect to a Fund upon termination of the Advisory Agreement with respect to such Fund.
Withdrawal, Substitution, and Modification of Tenders 23.1 A Tenderer may withdraw, substitute, or modify its Tender after it has been submitted by sending a written notice, duly signed by an authorized representative, and shall include a copy of the authorization (the power of attorney) in accordance with ITT19.3, (except that withdrawal notices do not require copies). The corresponding substitution or modification of the Tender must accompany the respective written notice. All notices must be: a) prepared and submitted in accordance with ITT 20 and 21 (except that withdrawal notices do not require copies), and in addition, the respective envelopes shall be clearly marked “WITHDRAWAL,” “SUBSTITUTION,” or “MODIFICATION;” and b) received by the Procuring Entity prior to the deadline prescribed for submission of Xxxxxxx, in accordance with ITT 22. 23.3 Tenders requested to be withdrawn in accordance with ITT 23.1 shall be returned unopened to the Tenderers. 23.4 No Tender may be withdrawn, substituted, or modified in the interval between the deadline for submission of Tenders and the expiration of the period of Tender validity specified by the Tenderer on the Form of Tender or any extension thereof.
TERM, TERMINATION, AND MODIFICATION OF RIGHTS 13.1 This Agreement is effective when signed by all parties, unless the provisions of Paragraph 14.15 are not fulfilled, and shall extend to either the expiration of the last to expire of the Licensed Patent Rights or twenty (20) years, whichever is longer, unless sooner terminated as provided in this Article 13. 13.2 In the event that the Licensee is in default in the performance of any material obligations under this Agreement, including but not limited to the obligations listed in Paragraph 13.5, and if the default has not been remedied within ninety (90) days after the date of notice in writing of the default, IC may terminate this Agreement by written notice and pursue outstanding royalties owed through procedures provided by the Federal Debt Collection Act. 13.3 In the event that the Licensee becomes insolvent, files a petition in bankruptcy, has such a petition filed against it, determines to file a petition in bankruptcy, or receives notice of a third party’s intention to file an involuntary petition in bankruptcy, the Licensee shall immediately notify IC in writing. 13.4 The Licensee shall have a unilateral right to terminate this Agreement in any country or territory by giving IC sixty (60) days written notice to that effect. 13.5 IC shall specifically have the right to terminate or modify, at its option, this Agreement, if IC determines that the Licensee: (a) is not executing the WHO C-TAP Development Plan submitted with its request for a license and the Licensee cannot otherwise demonstrate to IC’s satisfaction that the Licensee has taken, or can be expected to take within a reasonable time, effective steps to achieve Practical Application of the Licensed Products or Licensed Processes; (b) has not achieved the Benchmarks as may be modified under Paragraph 9.2; (c) has willfully made a false statement of, or willfully omitted, a material fact in the license application or in any report required by this Agreement; (d) has committed a material breach of a covenant or agreement contained in this (e) is not keeping Licensed Products or Licensed Processes reasonably available to the public after commercial use commences; (f) cannot reasonably satisfy unmet health and safety needs; or (g) cannot reasonably justify a failure to comply with the domestic production requirement of Paragraph 5.2, unless waived; or (h) has been found by a court of competent jurisdiction to have violated the Federal antitrust laws in connection with its performance under this Agreement. 13.6 In making the determination referenced in Paragraph 13.5, IC shall take into account the normal course of such commercial development programs conducted with sound and reasonable business practices and judgment and the annual reports submitted by the Licensee under Paragraph 9.2. Prior to invoking termination or modification of this Agreement under Paragraph 13.5, IC shall give written notice to the Licensee providing the Licensee specific notice of, and a ninety (90) day opportunity to respond to, IC’s concerns as to the items referenced in 13.5(a)-13.5(h). If the Licensee fails to alleviate IC’s concerns as to the items referenced in 13.5(a)-13.5(h) or fails to initiate corrective action to IC’s satisfaction, IC may terminate this Agreement. 13.7 IC reserves the right according to 35 U.S.C. §209(d)(3) to terminate or modify this Agreement if it is determined that the action is necessary to meet the requirements for public use specified by federal regulations issued after the date of the license and these requirements are not reasonably satisfied by the Licensee. 13.8 Within thirty (30) days of receipt of written notice of IC’s unilateral decision to modify or terminate this Agreement, the Licensee may, consistent with the provisions of 37 C.F.R. §404.11, appeal the decision by written submission to the designated IC official. The decision of the designated official shall be the final agency decision. The Licensee may thereafter exercise any and all administrative or judicial remedies that may be available. 13.9 Within ninety (90) days of expiration or termination of this Agreement under this Article 13, a final report shall be submitted by the Licensee. Any royalty payments, including those incurred but not yet paid (such as the full minimum annual royalty), and those related to patent expense, due to IC shall become immediately due and payable upon termination or expiration. Unless otherwise specifically provided for under this Agreement, upon termination of this Agreement, the Licensee shall return all Licensed Products or other materials included within the Licensed Patent Rights to IC or provide IC with written certification of the destruction thereof. The Licensee may not be granted additional IC licenses if the final reporting requirement is not fulfilled.
Commercial Operation Date Testing and Modifications Prior to the Commercial Operation Date, the Connecting Transmission Owner shall test the Connecting Transmission Owner’s Attachment Facilities and System Upgrade Facilities and System Deliverability Upgrades and Developer shall test the Large Generating Facility and the Developer Attachment Facilities to ensure their safe and reliable operation. Similar testing may be required after initial operation. Developer and Connecting Transmission Owner shall each make any modifications to its facilities that are found to be necessary as a result of such testing. Developer shall bear the cost of all such testing and modifications. Developer shall generate test energy at the Large Generating Facility only if it has arranged for the injection of such test energy in accordance with NYISO procedures.
Implementation of Agreement Each Party must promptly execute all documents and do all such acts and things as is necessary or desirable to implement and give full effect to the provisions of this Agreement.
Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.
Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.
Implementation of the Agreement Regulations of this Agreement relating to investments who investors of one Contracting Party realized before or after the entry into force of this Agreement, with what shall apply from the moment of its entry into force, provided that such investments conducted in accordance with the laws of that Party Contracting.
