Grading The coarse aggregate as delivered to the mixer, shall be well graded as per IS specifications. Maximum size of aggregate used for the work shall be 20mm or 40mm or as specified in items in the bill of quantities and it shall confirm to IS: 383-1970, clause 4.2 (Table-2) However, the exact gradation required to produce a dense concrete of specified strength and desired workability shall be decided as per laboratory test by the Engineer. Coarse aggregate for use in concrete shall be well graded and shall conform to IS: 383-1970 requirements (as per Table-II) given below: 63mm 100 - - - 40mm 00-000 000 - - 20mm 00-00 00-000 100 - 16mm - - 00-000 000 12.5 - - - 90-100 10.00 00-00 00-00 00-00 00-00 4.75mm 0-5 0-10 0-10 0-10
Upgrading You may request an Upgrade. For purposes of an Upgrade request, each individual who constitutes the Depositor under the agreement for Retail Direct Services is considered a required Signing Officer for purposes of acceptance of the Upgrade, and You agree to ensure that each such individual agrees to the Upgrade and accepts the terms of this Agreement before initiating the Upgrade request. Implementation of an Upgrade is subject to the approval of the Financial Institution. a) if Transactions under Direct Services for Small Business require two Signing Officers to authorize, a Signing Officer who has provided evidence of acceptance of this Agreement can view the Account using an Access Terminal, but cannot use Direct Services for Small Business as set out in this Agreement until at least one other required Signing Officer has evidenced their acceptance of this Agreement to Us; or b) if Transactions under Direct Services for Small Business require one Signing Officer to authorize, a Signing Officer who has provided evidence of acceptance of this Agreement can use Direct Services for Small Business as set out in this Agreement. When evidence of this Agreement being accepted by the required number of Signing Officers has been provided to Us, this Agreement will no longer be Provisionally Accepted, the Upgrade will be complete, and this article 3, Upgrading, will no longer apply. We may, in Our sole discretion, revert to the pre-Upgrade status if evidence of acceptance of this Agreement by all required Signing Officers is not provided in a timely manner as required.
Rating The Notes can be issued without the requirement that they have any rating from a nationally recognized statistical rating organization.
Tests on Completion (i) At least 30 (thirty) days prior to the likely completion of the Project Highway, or a Section thereof, the Contractor shall notify the Authority’s Engineer of its intent to subject the Project Highway or a Section thereof, to Tests. The date and time of each of the Tests shall be determined by the Authority’s Engineer in consultation with the Contractor, and notified to the Authority who may designate its representative to witness the Tests. The Contractor shall either conduct the Tests as directed by the Authority’s Engineer or provide such assistance as the Authority’s Engineer may reasonably require for conducting the Tests. In the event of the Contractor and the Authority’s Engineer failing to mutually agree on the dates for conducting the Tests, the Contractor shall fix the dates by giving not less than 10 (ten) days’ notice to the Authority’s Engineer. (ii) All Tests shall be conducted in accordance with Schedule-K. The Authority’s Engineer shall either conduct or observe, monitor and review the Tests conducted by the Contractor, as the case may be, and review the results of the Tests to determine compliance of the Project Highway or a Section thereof, with Specifications and Standards and if it is reasonably anticipated or determined by the Authority’s Engineer during the course of any Test that the performance of the Project Highway or Section or any part thereof, does not meet the Specifications and Standards, it shall have the right to suspend or delay such Test and require the Contractor to remedy and rectify the Defect or deficiencies. Upon completion of each Test, the Authority’s Engineer shall provide to the Contractor and the Authority copies of all Test data including detailed Test results. For the avoidance of doubt, it is expressly agreed that the Authority’s Engineer may require the Contractor to carry out or cause to be carried out additional Tests, in accordance with Good Industry Practice, for determining the compliance of the Project Highway or Section thereof with the Specifications and Standards.
Ratings No “nationally recognized statistical rating organization” as such term is defined for purposes of Rule 436(g)(2) (i) has imposed (or has informed the Company that it is considering imposing) any condition (financial or otherwise) on the Company’s retaining any rating assigned to the Company or any securities of the Company or (ii) has indicated to the Company that it is considering any of the actions described in Section 7(c)(ii) hereof.
Downgrade You have no rights to use earlier versions of the software under this license and Microsoft is not obligated to supply earlier versions to you.
Mileage Measurement Where required, the mileage measurement for LIS rate elements is determined in the same manner as the mileage measurement for V&H methodology as outlined in NECA Tariff No. 4.
Measuring EPP parameters Every 5 minutes, EPP probes will select one “IP address” of the EPP servers of the TLD being monitored and make an “EPP test”; every time they should alternate between the 3 different types of commands and between the commands inside each category. If an “EPP test” result is undefined/unanswered, the EPP service will be considered as unavailable from that probe until it is time to make a new test.
Production definitively discontinued 10.1. If the holder of the approval completely ceases to manufacture a vehicle type approved in accordance with this Regulation, he shall so inform the authority which granted the approval. Upon receiving the relevant communication that authority shall inform thereof the other Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model in Annex 1 to this Regulation.
PRIORITY RATING If so identified, this Contract is a "rated order" certified for national defense, emergency preparedness, and energy program use, and SELLER shall follow all the requirements of the Defense Priorities and Allocation System Regulation (15 C.F.R. Part 700).