E-Bidders intending to authorize any person to execute the Memorandum/Contract of Sale upon successful bidding of the property shall do so by furnishing the following documents to the Auctioneer:
a. The person’s NRIC copy (front and back); and
b. A copy of the relevant Letter of Authorization.
Shift Bidding 1. Commencing October 1 of each calendar year, shift bids will be open for the following year. The selection of work shifts will be made by the seniority bid process. Those with the highest seniority will bid first among their job classification within the Patrol Division. Seniority will be based on hire date to, or promotion date of, your job classification. Positions include Patrol Officer and Patrol Sergeant. Shifts will be bid for an entire calendar year with markup changes on January 1, April 1, July 1, and October 1. Each Employee will be allotted a maximum of two (2) work days after notification to complete his/her bidding.
2. Shift selection shall be assigned through the seniority bidding process for all Guild members, excluding probationary officers. The Chief of Police shall have exclusive discretion to assign probationary officers to shifts based upon a need to further training, to evaluate and to meet departmental needs. Probationary assignments shall be made without altering non-probationary officer(s) shift bids if at all possible. In the event non- probationary officer(s) bid upon shifts are changed, the shift re-bid process defined in Article 8 (D) shall apply. Upon completion of probation, an officer will then be included in the seniority bidding process based upon their original date of hire. (prior MOU draft)
3. The Chief of Police retains the exclusive right to determine the starting time of the work shifts and the number of shifts in a work day; provided that in the event that an Employee’s routine shift starting time is changed by more than two (2) hours and/or the Employee’s routine work days are changed after the bidding process, the Department must provide notice of the shift changes in accordance with Article 8 (F) and must allow for the opportunity of a shift rebid process.
4. This section shall be interpreted as a waiver of the Guild’s right to bargain changes in the starting times of work shifts in accordance with its terms, but shall not be considered a waiver of the Guild’s right to require the Employer to bargain over changes in the length of the work shifts, for example, five 8’s, four 10’s, 10:40’s, 11:25’s, 12’s, etc.
Borrowing Procedures and Settlements (a) Procedure for Borrowing. Each Borrowing shall be made by an irrevocable written request by an Authorized Person delivered to Agent (which notice must be received by Agent no later than 10:00 a.m. (California time) on the Business Day prior to the date that is the requested Funding Date specifying (i) the amount of such Borrowing, and (ii) the requested Funding Date, which shall be a Business Day; provided, however, that in the case of a request for -------- ------- Swing Loan in an amount of $5,000,000, or less, such notice will be timely received if it is received by Agent no later than 10:00 a.m. (California time) on the Business Day that is the requested Funding Date) specifying (i) the amount of such Borrowing, and (ii) the requested Funding Date, which shall be a Business Day. At Agent's election, in lieu of delivering the above-described written request, any Authorized Person may give Agent telephonic notice of such request by the required time, with such telephonic notice to be confirmed in writing within 24 hours of the giving of such notice.
Software Subscription Use Case Red Hat Storage Server for On- Premise Red Hat Storage Server for On-Premise is intended to be used as a storage system and will be supported only when used as a storage node. Red Hat Storage Server is not supported on non- server hardware such as desktops or workstations. Red Hat Storage Server for On-Premise is intended for use on a dedicated System, Physical Node, Virtual Node or Virtual Guest; running other applications and/or programs of any type on the System, Physical Node, Virtual Node or Virtual Guest can have a negative impact on the function and/or performance of the Red Hat Storage Server and is not a supported Use Case. Each Red Hat Storage Server Subscription includes one Software Subscription to Red Hat Enterprise Linux Server and the Scalable File System Add-on, which are supported solely in connection with the use of Red Hat Storage Server. Red Hat Storage Server for Public Cloud Red Hat Storage Server for Public Cloud is intended to be used as a storage system and will be supported only when used as a storage node. When running in Amazon Web Services, an EC2 M1 Large dedicated instance is required in order to be supported. Running other applications and/or programs of any type on the same instance can have a negative impact on the function and/or performance of the Red Hat Storage Server and is not a supported Use Case. Each Red Hat Storage Server Subscription includes one Software Subscription to Red Hat Enterprise Linux Server and the Scalable File System Add-on, which are supported solely in connection with the use of Red Hat Storage Server. Red Hat Storage for Red Hat Enterprise Linux OpenStack Platform Red Hat Storage Server for Red Hat Enterprise Linux OpenStack Platform is intended to be used as a storage system with Red Hat Enterprise Linux OpenStack Platform and will be supported only when used as a storage node. Red Hat Storage Server is not supported on non-server hardware such as desktops or workstations. Red Hat Storage Server for Red Hat Enterprise Linux OpenStack Platform is intended for use on a dedicated Physical Node; running other applications and/or programs of any type on the Physical Node can have a negative impact on the function and/or performance of the Red Hat Storage Server and is not a supported Use Case. Each Red Hat Storage Server Subscription includes one Software Subscription to Red Hat Enterprise Linux Server and the Scalable File System Add-on, which are supported solely in connection with the use of Red Hat Storage Server.
Bidding Phase 2.8.1 The Professional, following the Owner's approval of the Construction Document Phase, shall assist the Owner in obtaining bids and in award and preparation of Construction Contracts.
2.8.2 The Professional shall attend the bid opening and furnish a suitably detailed tabulation sheet for recording the name of each Bidder, the Bidder's Certificate of Responsibility Number, Bid Security, Base Bid, Alternates, and remarks. The Professional shall furnish sufficient tabulation sheets for all in attendance. Immediately after receipt of bids, the Professional shall submit to the Owner a certified tabulation of all bids received, along with his recommendation as to Contract award.
2.8.3 The Professional, following the award of a Construction Contract, shall prepare and submit to the Owner, two (2) copies of updated Construction Documents (Plans/Specifications). Each copy shall be marked OFFICIAL CONTRACT DOCUMENTS and shall include an executed bid Proposal Form, Agreement Form, Contract Bond, Power of Attorney, Certificate of Insurance, all bulletins, Addenda, and supplemental Drawings. One (1) copy shall be retained by the Owner, one (1) copy shall be for the Contractor. Any other contract document guidelines will be distributed to the Professional at the bid opening.
2.8.4 The Professional shall also furnish the area and volume of the building computed in accordance with criteria of the American Institute of Architects; and the square foot and cubic foot costs of only the building, the mechanical system, the electrical system, special built-in equipment, and the total Project cost.
2.8.5 The Professional shall, unless waived by the Owner, also submit one electronic format copy of the updated Contract Documents (plans and specifications) in coordination with said Contract Documents in 2.8.3 above. Said electronic submittal to be submitted within thirty (30) days after award by Owner in .pdf format. The actual cost of the electronic submittal shall be paid by the Owner, with cost approval by the Owner before printing is ordered in accordance with 3.4.
Timber Designations Timber designated for cutting shall be confined to Sale Area, except as provided in B2.131, B2.14, B2.15, B2.32, and B5.
1. Sale Area Map
Credit Bidding The Secured Parties hereby irrevocably authorize the Administrative Agent, at the direction of the Required Lenders, to credit bid all or any portion of the Obligations (including by accepting some or all of the Collateral in satisfaction of some or all of the Obligations pursuant to a deed in lieu of foreclosure or otherwise) and in such manner purchase (either directly or through one or more acquisition vehicles) all or any portion of the Collateral (a) at any sale thereof conducted under the provisions of the Bankruptcy Code, including under Sections 363, 1123 or 1129 of the Bankruptcy Code, or any similar laws in any other jurisdictions to which a Loan Party is subject, or (b) at any other sale, foreclosure or acceptance of collateral in lieu of debt conducted by (or with the consent or at the direction of) the Administrative Agent (whether by judicial action or otherwise) in accordance with any applicable law. In connection with any such credit bid and purchase, the Obligations owed to the Secured Parties shall be entitled to be, and shall be, credit bid by the Administrative Agent at the direction of the Required Lenders on a ratable basis (with Obligations with respect to contingent or unliquidated claims receiving contingent interests in the acquired assets on a ratable basis that shall vest upon the liquidation of such claims in an amount proportional to the liquidated portion of the contingent claim amount used in allocating the contingent interests) for the asset or assets so purchased (or for the equity interests or debt instruments of the acquisition vehicle or vehicles that are issued in connection with such purchase). In connection with any such bid (i) the Administrative Agent shall be authorized to form one or more acquisition vehicles and to assign any successful credit bid to such acquisition vehicle or vehicles, (ii) each of the Secured Parties’ ratable interests in the Obligations which were credit bid shall be deemed without any further action under this Agreement to be assigned to such vehicle or vehicles for the purpose of closing such sale, (iii) the Administrative Agent shall be authorized to adopt documents providing for the governance of the acquisition vehicle or vehicles (provided that any actions by the Administrative Agent with respect to such acquisition vehicle or vehicles, including any disposition of the assets or equity interests thereof, shall be governed, directly or indirectly, by, and the governing documents shall provide for, control by the vote of the Required Lenders or their permitted assignees under the terms of this Agreement or the governing documents of the applicable acquisition vehicle or vehicles, as the case may be, irrespective of the termination of this Agreement and without giving effect to the limitations on actions by the Required Lenders contained in Section 9.02 of this Agreement), (iv) the Administrative Agent on behalf of such acquisition vehicle or vehicles shall be authorized to issue to each of the Secured Parties, ratably on account of the relevant Obligations which were credit bid, interests, whether as equity, partnership interests, limited partnership interests or membership interests, in any such acquisition vehicle and/or debt instruments issued by such acquisition vehicle, all without the need for any Secured Party or acquisition vehicle to take any further action, and (v) to the extent that Obligations that are assigned to an acquisition vehicle are not used to acquire Collateral for any reason (as a result of another bid being higher or better, because the amount of Obligations assigned to the acquisition vehicle exceeds the amount of Obligations credit bid by the acquisition vehicle or otherwise), such Obligations shall automatically be reassigned to the Secured Parties pro rata with their original interest in such Obligations and the equity interests and/or debt instruments issued by any acquisition vehicle on account of such Obligations shall automatically be cancelled, without the need for any Secured Party or any acquisition vehicle to take any further action. Notwithstanding that the ratable portion of the Obligations of each Secured Party are deemed assigned to the acquisition vehicle or vehicles as set forth in clause (ii) above, each Secured Party shall execute such documents and provide such information regarding the Secured Party (and/or any designee of the Secured Party which will receive interests in or debt instruments issued by such acquisition vehicle) as the Administrative Agent may reasonably request in connection with the formation of any acquisition vehicle, the formulation or submission of any credit bid or the consummation of the transactions contemplated by such credit bid.
RESERVE PRICE AND BIDDING AT AUCTION CONDITIONS OF SALE
1.1 This sale is made by AmBank (M) Berhad [196901000166 (8515-D)][formerly known as AmFinance Berhad](“Assignee/Bank”) in exercise of the rights and powers conferred upon the Assignee/Bank pursuant to the Facility Agreement, Deed Of Assignment and Power Of Attorney all dated the 19th October, 2017 executed by Todi Ashish (Assignor/Borrower”) in favour of the Assignee/Bank subject to all conditions and category of land use, express or implied or imposed upon or relating to or affecting the property (“Property”) and shall further subject to the reserve price (“Reserve Price”) and the Conditions of Sale as appearing in the Proclamation of Sale.
1.2 Subject to the provisions of Clause 5 below the highest bidder for the Property described in the Proclamation of Sale if so allowed by the Auctioneer shall be the Purchaser (“Purchaser”) thereof and the Auctioneer shall have the right to reject any bid. If any dispute shall arise as to any bidding, the Property shall be at the option of the Auctioneer be put up again for sale at the last undisputed bid or the Auctioneer may decide on the dispute and the decision of the Auctioneer on all matters not provided for in this Conditions of Sale shall be final and binding in all respects if such decision is made during the course of conducting the auction on the auction date.
1.3 No bid shall be less than the previous bid and each bid shall be increased by a minimum amount to be determined by the Auctioneer at the time the Property is put up for sale and no bidding shall be withdrawn or retracted. Should there be any withdrawal or retraction from the registered bidder(s) or the highest bidder before or after the fall of the hammer, the bidding deposit (“Bidding Deposit”) shall be forfeited to the Assignee/Bank and the Property shall be at the option of the Auctioneer be put up for sale again or the Auctioneer may decide to adjourn the auction sale to another date.
1.4 In the event the subject matter offered for auction comprises more than one (1) property, the Auctioneer shall have the right to: -
(a) determine or vary the order of sale;
(b) offer the properties for sale either individually or en bloc or in any combination/manner as determined by the Auctioneer; and/or
(c) withdraw any of the properties from the sale.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply.
2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.
2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire.
2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.
2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
