Procedures for import, export and transit Sample Clauses

Procedures for import, export and transit. 1. Each Party shall apply its customs legislation and other trade-related laws and regulations in a predictable, consistent, transparent and non-discriminatory manner. 2. Each Party shall ensure that its customs procedures: (a) are consistent with international standards and recommended practices applicable to each Party in the area of customs procedures such as those made under the auspices of the World Customs Organization1 (hereinafter referred to as "the WCO"), including the substantive elements of the Protocol of Amendment to the International Convention on the Simplification and Harmonization of Customs Procedures, done at Brussels on 26 June 1999, the International Convention on the Harmonized Commodity Description and Coding System, done at Brussels on 14 June 1983, and the Framework of Standards to Secure and Facilitate Global Trade of the WCO (hereinafter referred to as "the SAFE Framework"); (b) aim at facilitating legitimate trade, taking into account the evolution of trade practices, while securing compliance with its laws and regulations; (c) provide for effective enforcement in case of breaches of its laws and regulations concerning customs procedures, including duty evasion and smuggling; and (d) do not include mandatory use of customs brokers or preshipment inspections. 3. Each Party shall adopt or maintain measures granting favourable treatment with respect to customs controls prior to the release of goods to traders or operators fulfilling criteria specified in its laws and regulations. 4. Each Party shall promote the development and use of advanced systems, including those based on information and communications technology, to facilitate the exchange of electronic data between traders or operators and its customs authority and other trade-related agencies. 5. Each Party shall work towards further simplification and standardisation of data and documentation required by its customs authority and other trade-related agencies.
AutoNDA by SimpleDocs

Related to Procedures for import, export and transit

  • CAUTIONS FOR GLOBAL USE AND EXPORT AND IMPORT COMPLIANCE Due to the global nature of the internet, through the use of our network you hereby agree to comply with all local rules relating to online conduct and that which is considered acceptable Content. Uploading, posting and/or transferring of software, technology and other technical data may be subject to the export and import laws of the United States and possibly other countries. Through the use of our network, you thus agree to comply with all applicable export and import laws, statutes and regulations, including, but not limited to, the Export Administration Regulations (xxxx://xxx.xxxxxx.xxx.xxx/bis/ear/ear_data.html), as well as the sanctions control program of the United States (xxxx://xxx.xxxxxxxx.xxx/resource- center/sanctions/Programs/Pages/Programs.aspx). Furthermore, you state and pledge that you:

  • Import and Export Compliance In connection with this Agreement, each party will comply with all applicable import, re-import, export, and re-export control laws and regulations, including the Export Administration Regulations, the International Traffic in Arms Regulations, and country-specific economic sanctions programs implemented by the Office of Foreign Assets Control. For clarity, Client agrees to be solely responsible for compliance related to the manner in which Client chooses to use the Services, including Client’s transfer and processing of content and the provision of such content to others.

  • Export/Import 14.1 The Works (including, without limitation, any Software) may be subject to the export or import laws and regulations of: 14.1.1 the United States, including without limitation the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Parts 120-130), the U.S. Export Administration Regulations (15 C.F.R. Parts 730-774), and the economic and trade sanctions administered by the U.S. Department of Treasury Office of Foreign Assets Control; 14.1.2 the European Union and its member states, including without limitation Council Regulation (EC) No. 1334/2000; and 14.1.3 other countries (collectively, “Export/Import Law”). Buyer agrees to comply strictly with all Export/Import Laws applicable to the Works. Buyer shall promptly notify Supplier of any authorisation requirements under Export/Import Laws that may apply to delivery of the Works to Buyer site(s). Buyer acknowledges and agrees that the Works shall not be exported, re-exported, trans-shipped or otherwise transferred to Cuba, Iran, North Korea, Syria, Sudan, or any other countries for which the United States and/or the European Union maintains an embargo (collectively, "Embargoed Countries"), or a national or resident thereof, or to any person or entity on the U.S. Department of Treasury List of Specially Designated Nationals, the U.S. Department of Commerce Denied Parties or Entity List, or to any person on any comparable list maintained by the European Union or its member states (collectively, "Denied or Restricted Parties"). The lists of Embargoed Countries and Denied or Restricted Parties are subject to change without notice. Buyer represents and warrants that neither it nor any of their customers or their users is located in, a national or resident of, or under the control of an Embargoed Country or similarly Denied or Restricted Party. Buyer specifically shall obtain all required authorizations from the U.S. (or EU as applicable) Government before transferring or otherwise disclosing technical data or technology (as those terms are defined in 22 C.F.R. § 120.10 and 15 C.F.R. § 722, respectively), to any Foreign Person (as defined in 22 C.F.R. § 120.16). 14.2 Registration In accordance with 22 C.F.R. Part 122, any person who engages in the United States in the business of either manufacturing or exporting defense articles or furnishing defense services is required to register with the U.S. State Department’s Directorate of Defense Trade controls. Engaging in the business of manufacturing or exporting defense articles or furnishing defense services requires only one occasion of manufacturing or exporting a defense article or furnishing defense services. Manufacturers who do not engage in exporting must nevertheless register. 14.3 Acceptance of these terms and conditions certifies to the Supplier that the Buyer is in compliance with 22 C.F.R. Part 120 as required and the Buyer’s registration will remain valid during the terms of this agreement. 14.4 Further to acceptance, the Buyer further certifies it: 14.4.1 Understands its obligation to protect EAR or ITAR controlled Goods and Services as data as necessary from unauthorized disclosure or access to foreign person employees or visitors. 14.4.2 In the performance of the contract, the Buyer understands its obligation to determine whether it will require the use of third party subcontractors to access any technical data, Goods and Services. If required, the Buyer is responsible for identifying and licensing any activity that requires export authorization from the Department of Commerce, Bureau of Industry and Security or the Department of State, Directorate of Defense Trade Controls. 14.5 The Goods shall not be resold or exported to countries specified in the Country Guidance Chart which can be found at xxxx://xxx.xxxxxx.xxx/about-cobham/aerospace-and-security/about- us/useful-information.aspx without prior written approval of Supplier.

  • Export and Import Laws The Company and, to the Company’s knowledge, each of its Affiliates, and any director, officer, agent or employee of, or other person associated with or acting on behalf of the Company, has acted at all times in compliance with applicable Export and Import Laws (as defined below) and there are no claims, complaints, charges, investigations or Proceedings pending or expected or, to the knowledge of the Company, threatened between the Company or any of its subsidiaries and any governmental authority under any Export or Import Laws. The term “Export and Import Laws” means the Arms Export Control Act, the International Traffic in Arms Regulations, the Export Administration Act of 1979, as amended, the Export Administration Regulations, and all other laws and regulations of the United States government regulating the provision of services to non-U.S. parties or the export and import of articles or information from and to the United States of America, and all similar laws and regulations of any foreign government regulating the provision of services to parties not of the foreign country or the export and import of articles and information from and to the foreign country to parties not of the foreign country.

  • Import and Export Restrictions No Party shall adopt or maintain any prohibition or restriction on the importation of any good of another Party or on the exportation or sale for export of any good destined for the territory of another Party, except as otherwise provided in this Agreement or in accordance with Article XI of GATT 1994 and its interpretative notes. To this end, Article XI of GATT 1994 and its interpretive notes are incorporated into and made integral part of this Agreement mutatis mutandis.

  • Required Procurement Procedures for Obtaining Goods and Services The Grantee shall provide maximum open competition when procuring goods and services related to the grant- assisted project in accordance with Section 287.057, Florida Statutes.

  • Import/Export a) Purchase orders issued pursuant to this contract shall specify the applicable International Commercial Terms of Sale (Incoterms) and the United States importer of record for all items procured under this contract. b) In performing the obligations of this contract, both Parties will comply with all applicable export, import and sanctions laws, regulations, orders, and authorizations, as they may be amended from time to time, applicable to the export (including re-export) or import of goods, software, technology, or technical data (Items) or services, including without limitation the Export Administration Regulations (EAR), International Traffic in Arms Regulations (ITAR), and regulations and orders administered by the Treasury Department’s Office of Foreign Assets Control (collectively, Export/Import Laws). c) The Party conducting the export or import shall obtain all export or import authorizations which are required under the Export/Import Laws for said Party to execute its obligations under this contract. Each Party shall reasonably cooperate and exercise reasonable efforts at its own expense to support the other Party in obtaining any necessary licenses or authorizations required to perform its obligations under this contract. Reasonable cooperation shall include providing reasonably necessary documentation, including import, end-user and retransfer certificates. d) The Party providing Items or services under this contract shall, upon request, notify the other Party of the Items or services’ export classification (e.g., the Export Control Classification Numbers or United States Munitions List [USML] category and subcategory) as well as the export classification of any components or parts thereof if they are different from the export classification of the Item at issue. The Parties acknowledge that this representation means that an official capable of binding the Party providing such Items or services knows or has otherwise determined the proper export classification. Each Party agrees to reasonably cooperate with the other in providing, upon request of the other Party, documentation or other information that supports or confirms this representation

  • Export Control Laws LICENSEE shall observe all applicable United States and foreign laws with respect to the transfer of Licensed Products and related technical data to foreign countries, including, without limitation, the International Traffic in Arms Regulations and the Export Administration Regulations.

  • Export Control This Agreement is made subject to any restrictions concerning the export of products or technical information from the United States or other countries that may be imposed on the Parties from time to time. Each Party agrees that it will not export, directly or indirectly, any technical information acquired from the other Party under this Agreement or any products using such technical information to a location or in a manner that at the time of export requires an export license or other governmental approval, without first obtaining the written consent to do so from the appropriate agency or other governmental entity in accordance with Applicable Law.

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!