Process Capability and Control Sample Clauses

Process Capability and Control. Supplier is required to ensure that processes shall meet process capability and SPC requirements as defined in the AIAG PPAP and Statistical Process Control reference manual, unless otherwise specified by Stoneridge. Supplier is responsible for ensuring that control requirements are documented in the control plan and that capability indices are achieved and improved throughout production. If the required capability cannot be reached, then 100% testing by Supplier is mandatory and Supplier will be responsible for all costs associated with such testing. Supplier is obligated to define samples ("golden" samples) to be used as reference for the manufacturing process and final product. Upon request of Stoneridge, Supplier shall provide measurement and traceability data for special characteristics. Without the prior written approval of Stoneridge, Supplier shall not repair components. Rework/repair includes all activities on components outside the documented process flow.
AutoNDA by SimpleDocs
Process Capability and Control. Suppliers are required that processes shall meet process capability and SPC requirements as defined in the AIAG PPAP and SPC reference manual, unless otherwise specified by Continental Automotive. The acceptance criteria for short term studies is a Cmk and Ppk >= 2. For long term process capability a Cpk >= 1,67 is required. The supplier is responsible that control requirements are documented in the control plan and that capability indices are achieved and improved throughout production. If the required capability cannot be reached then 100% testing is mandatory. The Supplier is obligated to define samples ("golden" samples) to be used as reference for the manufacturing process and final product. Upon request of Continental the Supplier shall provide measurement and traceability data for special characteristics. The Supplier shall inform Continental about any deviation of the current reading of the First Pass Yield (FPY) from the average weekly FPY of more than +/-10% for any product within two days after the deviation occurred. The Supplier shall provide information regarding the current and past FPY upon request of Continental. Without the prior written approval of Continental the Supplier shall not repair or sort components. Rework/repair includes all activities on components outside the documented process flow.
Process Capability and Control 

Related to Process Capability and Control

  • Electronic and Information Resources Accessibility and Security Standards a. Applicability: The following Electronic and Information Resources (“EIR”) requirements apply to the Contract because the Grantee performs services that include EIR that the System Agency's employees are required or permitted to access or members of the public are required or permitted to access. This Section does not apply to incidental uses of EIR in the performance of the Agreement, unless the Parties agree that the EIR will become property of the State of Texas or will be used by HHSC’s clients or recipients after completion of the Agreement. Nothing in this section is intended to prescribe the use of particular designs or technologies or to prevent the use of alternative technologies, provided they result in substantially equivalent or greater access to and use of a Product.

  • Experience, Financial Capability and Suitability Subscriber is: (i) sophisticated in financial matters and is able to evaluate the risks and benefits of the investment in the Shares and (ii) able to bear the economic risk of its investment in the Shares for an indefinite period of time because the Shares have not been registered under the Securities Act (as defined below) and therefore cannot be sold unless subsequently registered under the Securities Act or an exemption from such registration is available. Subscriber is capable of evaluating the merits and risks of its investment in the Company and has the capacity to protect its own interests. Subscriber must bear the economic risk of this investment until the Shares are sold pursuant to: (i) an effective registration statement under the Securities Act or (ii) an exemption from registration available with respect to such sale. Subscriber is able to bear the economic risks of an investment in the Shares and to afford a complete loss of Subscriber’s investment in the Shares.

  • Responsibility and Control Notwithstanding any other provision of this Agreement, it is understood and agreed that the Trust reserves the right to direct, approve or disapprove any action hereunder taken on its behalf by the Subadviser, provided, however, that the Subadviser shall not be liable for any losses to the Trust resulting from the Trust’s direction, or from the Trust’s disapproval of any action proposed to be taken by the Subadviser.

  • Registry Interoperability and Continuity Registry Operator shall comply with the Registry Interoperability and Continuity Specifications as set forth in Specification 6 attached hereto (“Specification 6”).

  • The Web Services E-Verify Employer Agent agrees to, consistent with applicable laws, regulations, and policies, commit sufficient personnel and resources to meet the requirements of this MOU.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

  • System Access Control Data processing systems used to provide the Cloud Service must be prevented from being used without authorization.

  • Evaluation Software If the Software is an evaluation version or is provided to You for evaluation purposes, then, unless otherwise approved in writing by an authorized representative of Licensor, Your license to use the Software is limited solely for internal evaluation purposes in non-production use and in accordance with the terms of the evaluation offering under which You received the Software, and expires 90 days from installation (or such other period as may be indicated within the Software). Upon expiration of the evaluation period, You must discontinue use of the Software, return to an original state any actions performed by the Software, and delete the Software entirely from Your system and You may not download the Software again unless approved in writing by an authorized representative of Licensor. The Software may contain an automatic disabling mechanism that prevents its use after a certain period of time. RESTRICTIONS

  • Year 2000 Compatibility Take all action necessary to assure that its computer based systems are able to operate and effectively process data including dates on and after January 1, 2000, and, at the reasonable request of the Administrative Agent or the Required Lenders, provide evidence to the Lenders of such year 2000 compatibility.

  • Compatibility 1. Any unresolved issue arising from a mutual agreement procedure case otherwise within the scope of the arbitration process provided for in this Article and Articles 25A to 25G shall not be submitted to arbitration if the issue falls within the scope of a case with respect to which an arbitration panel or similar body has previously been set up in accordance with a bilateral or multilateral convention that provides for mandatory binding arbitration of unresolved issues arising from a mutual agreement procedure case. 2. Nothing in this Article and Articles 25A to 25G shall affect the fulfilment of wider obligations with respect to the arbitration of unresolved issues arising in the context of a mutual agreement procedure resulting from other conventions to which the Contracting States are or will become parties.”.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!