Product Family License Models. This section specifies license models that may be applicable to one or more Products. Note that not all license models are available for all Products.
Product Family License Models Sample Clauses
Related to Product Family License Models
License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
License Type Your license to a Product will be under a Named User or CPU license type, as specified on an order. Each Named User license to a Product entitles a Named User to access and use that Product in one production environment and up to two non-production environments. Each CPU license to a Product entitles you to assign the Product to a single CPU in one production environment and up to two non-production environments, for use in support of an unspecified number of Named Users.
Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.
Software License Terms (a) Software that is made available by a Provider to Recipient in connection with any Service (any such Software being referred to herein as “TSA-Licensed Software”) provided hereunder will be subject to the terms set forth in this Section 3.5 except as otherwise provided in the applicable Service Schedule. The Provider hereby grants to the Recipient a non-exclusive, non-transferable license to use, in object code form, any TSA-Licensed Software that is made available by the Provider pursuant to a Service Schedule. For the avoidance of doubt, the Provider that makes available any TSA-Licensed Software in connection with the provision of any Service retains the unrestricted right to enhance or otherwise modify such TSA-Licensed Software at any time, provided that such enhancements or other modifications do not disrupt the provision of such Service to the Recipient. (b) The Recipient may not exceed the number of licenses, agents, tiers, nodes, seats, or other use restrictions or authorizations, if any, specified in the applicable Service Schedule. Some TSA-Licensed Software may require license keys or contain other technical protection measures. The Recipient acknowledges that the Provider may monitor the Recipient’s compliance with use restrictions and authorizations remotely, or otherwise. If the Provider makes a license management program available which records and reports license usage information, the Recipient agrees to appropriately install, configure and execute such license management program. (c) Unless otherwise permitted by the Provider, the Recipient may only make copies or adaptations of the TSA-Licensed Software for archival purposes or when copying or adaptation is an essential step in the authorized use of TSA-Licensed Software. If the Recipient makes a copy for backup purposes and installs such copy on a backup device, the Recipient may not operate such backup installation of the TSA-Licensed Software without paying an additional license fee, except in cases where the original device becomes inoperable. If a copy is activated on a backup device in response to failure of the original device, the use on the backup device must be discontinued when the original or replacement device becomes operable. The Recipient may not copy the TSA-Licensed Software onto or otherwise use or make it available on, to, or through any public or external distributed network. Licenses that allow use over the Recipient’s intranet require restricted access by authorized users only. (d) The Recipient must reproduce all copyright notices that appear in or on the TSA-Licensed Software (including documentation) on all permitted copies or adaptations. Copies of documentation are limited to internal use. (e) Notwithstanding anything to the contrary herein, certain TSA-Licensed Software may be licensed under the applicable Service Schedule for use only on a computer system owned, controlled, or operated by or solely on behalf of the Recipient and may be further identified by the Provider by the combination of a unique number and a specific system type (“Designated System”) and such license will terminate in the event of a change in either the system number or system type, an unauthorized relocation, or if the Designated System ceases to be within the possession or control of the Recipient. (f) The Recipient will not modify, reverse engineer, disassemble, decrypt, decompile, or make derivative works of the TSA-Licensed Software. Where the Recipient has other rights mandated under statute, the Recipient will provide the Provider with reasonably detailed information regarding any intended modifications, reverse engineering, disassembly, decryption, or decompilation and the purposes therefor. (g) The Recipient may permit a consultant or subcontractor to use TSA-Licensed Software at the licensed location for the sole purpose of providing services to the Recipient. (h) Upon expiration or termination of the Service Schedule under which TSA-Licensed Software is made available, the Recipient will destroy the TSA-Licensed Software. The Recipient will remove and destroy or return to the Provider any copies of the TSA-Licensed Software that are merged into adaptations, except for individual pieces of data in the Recipient’s database. The Recipient will provide certification of the destruction of TSA-Licensed Software, and copies thereof, to the Provider. The Recipient may retain one copy of the TSA-Licensed Software subsequent to expiration or termination solely for archival purposes. (i) The Recipient may not sublicense, assign, transfer, rent, or lease the TSA-Licensed Software to any other person except as permitted in this Section 3.5. (j) The Recipient agrees that the Provider may engage a third party designated by the Provider and approved by the Recipient (such approval not to be unreasonably withheld) to audit the Recipient’s compliance with the Software License terms. Any such audit will be at the Provider’s expense, require reasonable notice, and will be performed during normal business hours. Such third party will be required to execute a non-disclosure agreement that restricts such third party from disclosing confidential information of the Recipient to the Provider, except to the extent required to report on the extent to which the Recipient is not in compliance with the Software License terms.
Licensed Patent Rights The term “Licensed Patent Rights” shall mean rights arising out of or resulting from:
Licensed Patents 9.1.1 Oculis shall be responsible for and shall have the exclusive right with respect to, the preparation, filing, prosecution, protection, maintenance and enforcement of all Patent Rights in respect of the Licensed Technology in its discretion using its patent counsel. Oculis shall consult with Accure with respect thereto, supply Accure with a copy of the application as filed, together with notice of its filing date and serial number; and keep Accure advised of the status of actual and prospective Patent Right filings, including office actions, and keep Accure informed about and provide copies of all the relevant information exchanged between Oculis and the different Industrial or Intellectual Property Registration Offices regarding the prosecution, maintenance, defense and enforcement of the Licensed Patents. The cost and expense of filing, prosecuting, maintaining and enforcing all Licensed Patents shall be borne by Oculis. Accure shall, and hereby procures its personnel will, provide all requested information and perform all acts reasonably requested by Oculis in connection with the prosecution, maintenance, defense or enforcement of the Licensed Technology. Without limiting the foregoing, Accure and its Affiliates may not file for further Patent Rights relating to Licensed Technology. 9.1.2 Should Oculis not be interested in the prosecution, defense and maintenance of any or all of the Licensed Patents, and/or Xxxxxx decides not to pay all reasonable and necessary expenses with respect to the prosecution, defense or maintenance of any Licensed Patent before any upcoming deadline, Oculis shall give reasonable advance notice to Accure (no less than [***]), and subsequent to such notice Accure shall act as it deems appropriate in connection with the prosecution, defense and maintenance of the Licensed Patents at their discretion and at their own cost. As from such notification, Oculis shall not be responsible for costs associated with such Licensed Patents, and, where such notification is provided following such time as Xxxxxx assumes responsible for performing patenting matters as set forth above, Oculis shall not be responsible for the preparation, filing, prosecution, protection and maintenance of the mentioned Licensed Patents and such Patent Rights shall cease to be Licensed Patents and the provisions of Agreement shall be of no further effect with respect to such patent and/or country of the Territory.
Patent Rights The State and the U. S. Department of Transportation shall have the royalty free, nonexclusive and irrevocable right to use and to authorize others to use any patents developed by the Engineer under this contract.
Third Party Patent Rights No Party makes any warranty with respect to the validity, perfection or dominance of any Patent or other proprietary right or with respect to the absence of rights in Third Parties which may be infringed by the manufacture or sale of the Licensed Product. Each Party agrees to bring to the attention of the other Party any patent or patent application it discovers, or has discovered, and which relates to the subject matter of this Agreement.
Third Party Technology The Company makes use of third party technology to collect information required for traffic measurement, research, and analytics. Use of third party technology entails data collection. We therefore would like to inform clients the Company enables third parties to place or read cookies located on the browsers of users entering the Company’s domain. Said third parties may also use web beacons to collect information through advertising located on the Company’s web site. Please note that you may change your browser settings to refuse or disable Local Shared Objects and similar technologies; however, by doing so you may be disabling some of the functionality of Company’s services.
Third Party Royalties (i) In the event that Amgen, its Affiliates or Sublicensee obtains a license under Patents of a Third Party in any country that Amgen or its Affiliate, on the advice of patent counsel, determines, in the absence of a license thereunder could be considered to be infringed by the manufacture, use, sale, offer for sale or import of the Compound contained in a Product sold by Amgen (or its Affiliate or Sublicensee) in such country (in each case, a “Necessary Third Party License”), then Amgen may deduct […***…]% of the royalties actually paid to such Third Party under such Necessary Third Party License with respect to sales of such Product in such country from the royalty payments owed to Xencor pursuant to Section 6.7 with respect to Net Sales of such Product in such country, provided that the royalties payable to Xencor with respect to such Product in such country may not be reduced by more than […***…]% in any calendar quarter as a result of any and all such offsets in the aggregate. (ii) In the event that Amgen, its Affiliates or Sublicensee obtains a license (other than a Necessary Third Party License) under Patents of a Third Party in any country that Amgen or its Affiliate determines are necessary or reasonably useful to Develop, make, use, sell, offer for sale or import a Compound or Product sold by Amgen (or its Affiliate or Sublicensee) in such country (in each case, a “Useful Third Party License”), then Amgen may deduct […***…]% of the […***…] actually paid to such Third Party under such Useful Third Party License with respect to sales of such Product in such country from the royalty payments owed to Xencor pursuant to Section 6.7 with respect to Net Sales of such Product in such country, provided that the royalties payable to Xencor with respect to such Product in such country may not be reduced by more than […***…]% in any calendar quarter as a result of any and all such offsets in the aggregate. (iii) For the avoidance of doubt, subject to the foregoing, it is understood that a Party shall be solely responsible for payment of any and all royalties and other amounts owed by such Party under its license or other agreements with Third Parties that were entered into prior to the Effective Date; provided, however, that Amgen shall be responsible for payment of all payments that become due after the Option Exercise Date under the Catalent Agreement (defined in Section 10.2(b)) as a result of the Development, manufacture, use, sale, offer for sale or import of any Product by or on behalf of Amgen or any of its Affiliates or Sublicensees.
