Production of Check Discs Sample Clauses

Production of Check Discs. By submission of a completed Game to NOA in accordance with section 4.1, LICENSEE authorizes Nintendo to proceed with production of Check Discs for such Game. If NOA approves a Game, it shall promptly, and without further notification to or instruction from LICENSEE, submit such Game for the production of Check Discs. Unless otherwise advised by LICENSEE, following production of the Check Discs, NOA shall deliver to LICENSEE approximately ten (10) Check Discs for content verification, testing and final approval by LICENSEE.
AutoNDA by SimpleDocs
Production of Check Discs. By submission of a completed Game to NINTENDO in accordance with Section 4.1, LICENSEE authorizes NINTENDO to proceed with production of Check Discs for such Game. If NINTENDO approves a Game, it shall promptly, and without further notification to or instruction from LICENSEE, submit such Game for the production of Check Discs. Unless otherwise advised by LICENSEE, following production of the Check Discs, NINTENDO shall deliver to LICENSEE approximately ten (10) Check Discs for content verification, testing and final approval by LICENSEE.
Production of Check Discs. By submission of a completed Game to NCL in accordance with Section 4.1, LICENSEE authorizes NCL to proceed with production of Check Discs for such Game. If NCL approves a Game, it shall promptly, and without further notification to or instruction from LICENSEE, submit such Game for the production of Check Discs. Unless otherwise advised by LICENSEE, following production of the Check Discs, NCL, shall deliver to LICENSEE approximately ten (10) Check Discs for content verification, testing and final approval by LICENSEE.
Production of Check Discs. By submission of a completed Game to Nintendo in accordance with section 4.1, LICENSEE authorizes Nintendo to proceed with production of Check Discs for such Game. If Nintendo approves a Game, it shall promptly, and without further notification to or instruction from LICENSEE, submit such Game for the production of Check Discs. Unless otherwise advised by LICENSEE, following production of the Check Discs, Nintendo shall deliver to LICENSEE approximately ten (10) Check Discs for content verification, testing and final approval by LICENSEE.

Related to Production of Check Discs

  • Conhecimento da Lingua O Contratado, pelo presente instrumento, declara expressamente que tem pleno conhecimento da língua inglesa e que leu, compreendeu e livremente aceitou e concordou com os termos e condições estabelecidas no Plano e no Acordo de Atribuição (“Agreement” xx xxxxxx).

  • Particular Methods of Procurement of Goods and Works International Competitive Bidding. Goods and works shall be procured under contracts awarded on the basis of International Competitive Bidding.

  • Mail Order Catalog Warnings In the event that, the Settling Entity prints new catalogs and sells units of the Products via mail order through such catalogs to California consumers or through its customers, the Settling Entity shall provide a warning for each unit of such Product both on the label in accordance with subsection 2.4 above, and in the catalog in a manner that clearly associates the warning with the specific Product being purchased. Any warning provided in a mail order catalog shall be in the same type size or larger than other consumer information conveyed for such Product within the catalog and shall be located on the same display page of the item. The catalog warning may use the Short-Form Warning content described in subsection 2.3(b) if the language provided on the Product label also uses the Short-Form Warning.

  • Production of Witnesses; Records; Cooperation (a) After the Effective Time, each Party shall use its commercially reasonable efforts to make available to the other Party, upon written request, the former, current and future directors, officers, employees, other personnel and agents of the members of its respective Group as witnesses and any books, records or other documents within its control or which it otherwise has the ability to make available without undue burden, to the extent that any such Person (giving consideration to business demands of such directors, officers, employees, other personnel and agents) or books, records or other documents may reasonably be required in connection with any Action in which the requesting Party (or member of its Group) may from time to time be involved, regardless of whether such Action is a matter with respect to which indemnification may be sought hereunder. The requesting Party shall bear all costs and expenses in connection therewith. (b) If an Indemnifying Party chooses to defend or to seek to compromise or settle any Third-Party Claim, the other Party shall make available to such Indemnifying Party, upon written request, the former, current and future directors, officers, employees, other personnel and agents of the members of its respective Group as witnesses and any books, records or other documents within its control or which it otherwise has the ability to make available without undue burden, to the extent that any such Person (giving consideration to business demands of such directors, officers, employees, other personnel and agents) or books, records or other documents may reasonably be required in connection with such defense, settlement or compromise, or such prosecution, evaluation or pursuit, as the case may be, and shall otherwise cooperate in such defense, settlement or compromise, or such prosecution, evaluation or pursuit, as the case may be. (c) Without limiting the foregoing, the Parties shall cooperate and consult to the extent reasonably necessary with respect to any Actions. (d) Without limiting any provision of this Section 6.7, each of the Parties agrees to cooperate, and to cause each member of its respective Group to cooperate, with each other in the defense of any infringement or similar claim with respect any Intellectual Property and shall not claim to acknowledge, or permit any member of its respective Group to claim to acknowledge, the validity or infringing use of any Intellectual Property of a third Person in a manner that would hamper or undermine the defense of such infringement or similar claim. (e) The obligation of the Parties to provide witnesses pursuant to this Section 6.7 is intended to be interpreted in a manner so as to facilitate cooperation and shall include the obligation to provide as witnesses inventors and other officers without regard to whether the witness or the employer of the witness could assert a possible business conflict (subject to the exception set forth in the first sentence of Section 6.7(a)).

  • TECHNICAL EVALUATION (a) Detailed technical evaluation shall be carried out by Purchase Committee pursuant to conditions in the tender document to determine the substantial responsiveness of each tender. For this clause, the substantially responsive bid is one that conforms to all the eligibility and terms and condition of the tender without any material deviation. The Institute’s determination of bid’s responsiveness is to be based on the contents of the bid itself without recourse to extrinsic evidence. The Institute shall evaluate the technical bids also to determine whether they are complete, whether required sureties have been furnished, whether the documents have been properly signed and whether the bids are in order. (b) The technical evaluation committee may call the responsive bidders for discussion or presentation to facilitate and assess their understanding of the scope of work and its execution. However, the committee shall have sole discretion to call for discussion / presentation. (c) Financial bids of only those bidders who qualify the technical criteria will be opened provided all other requirements are fulfilled. (d) AIIMS Jodhpur shall have right to accept or reject any or all tenders without assigning any reasons thereof.

  • Distribution of UDP and TCP queries DNS probes will send UDP or TCP “DNS test” approximating the distribution of these queries.

  • Electronic Visit Verification ("EVV A. To ensure: 1. the EVV system is used to verify the provision of services governed under 40 TAC, Chapter 68 or its successor; 2. only authorized people access the Contractor's EVV account; 3. all data elements required by HHSC or HHSC's designee are uploaded or entered and maintained in the EVV system completely, accurately, and prior to submitting the claim; 4. that each time services governed by 40 TAC Chapter 68 or its successor are delivered to an individual, the Contractor's staff uses an HHSC-approved EVV system; and 5. service delivery documentation is immediately available for review by HHSC when requested. B. Equipment provided to Contractor by HHSC, HHSC’s designee, or an HHSC-approved EVV vendor, must be returned in good condition when the equipment is no longer needed under this Contract. In the context of this agreement, “good condition” means Contractor must not place any marks or identifying information on the equipment and may not alter information on the equipment including logos and serial numbers. If the equipment is lost, stolen, marked, altered or damaged by Contractor, Contractor may be required to pay the replacement cost for each piece of equipment that is lost, stolen, marked or damaged. Replacement costs for lost, stolen, marked or damaged equipment may be assessed periodically. If Contractor recovers previously lost or stolen equipment for which Contractor paid the replacement cost in the prior 12 months, Contractor may return the equipment and be reimbursed for the replacement costs within 12 months of the date HHSC, HHSC’s designee or an HHSC-approved EVV vendor (as applicable) received payment in full from the Contractor. This is provided the equipment is returned in good condition as specified above. C. HHSC may perform EVV compliance oversight reviews to determine if Contractor has complied with EVV compliance requirements as outlined in 40 TAC Chapter 68 or its successor, EVV Policy posted on the HHSC EVV website or EVV Policy Handbook. D. If the Contractor determines an electronic record in the EVV system needs to be adjusted at any time, the Contractor will make the adjustment in the EVV system using the most appropriate EVV reason code number(s), EVV reason code description(s) and enter any required free text when completing visit maintenance in the EVV system, if applicable. E. Contractor must begin using an HHSC-approved EVV system prior to submitting an EVV relevant claim. F. All claims for services required to use EVV (EVV claims) must match to an accepted EVV visit transaction in the EVV Aggregator (the state’s centralized EVV database) prior to reimbursement of an EVV claim. Without a matching accepted EVV visit transaction, the claim will be denied. G. Contractor must submit all EVV related claims through the Texas Medicaid Claims Administrator, or as otherwise described in the EVV Policy posted on the HHSC EVV website or in the EVV Policy Handbook. H. Contractor must complete all required EVV training as outlined in the EVV Policy posted on the HHSC EVV website or EVV Policy Handbook: • Prior to using either an EVV vendor system or an EVV proprietary system and • Yearly thereafter. I. Contractor and, if applicable, the Contractor’s appointed EVV system administrator, must complete, sign and date the EVV Onboarding Form as outlined in 40 TAC Chapter 68 or its successor, EVV Policy posted on the HHSC website or EVV Policy Handbook.

  • Other Methods of Procurement of Goods and Works The following table specifies the methods of procurement, other than International Competitive Bidding, which may be used for goods and works. The Procurement Plan shall specify the circumstances under which such methods may be used: (a) National Competitive Bidding (b) Shopping (c) Direct Contracting

  • Linking to the Website and Social Media Features You may link to our homepage, provided you do so in a way that is fair and legal and does not damage our reputation or take advantage of it, but you must not establish a link in such a way as to suggest any form of association, approval, or endorsement on our part. This Website may provide certain social media features that enable you to: • Link from your own or certain third-party websites to certain content on this Website. • Send emails or other communications with certain content, or links to certain content, on this Website. • Cause limited portions of content on this Website to be displayed or appear to be displayed on your own or certain third-party websites. You may use these features solely as they are provided by us, and solely with respect to the content they are displayed with, and otherwise in accordance with any additional terms and conditions we provide with respect to such features. Subject to the foregoing, you must not: • Establish a link from any website that is not owned by you. • Cause the Website or portions of it to be displayed on, or appear to be displayed by, any other site, for example, framing, deep linking, or in-line linking. • Link to any part of the Website other than the homepage. • Otherwise take any action with respect to the materials on this Website that is inconsistent with any other provision of these Terms of Use. The website from which you are linking, or on which you make certain content available, must comply in all respects with the Content Standards set out in these Terms of Use. You agree to cooperate with us in causing any unauthorized framing or linking immediately to stop. We reserve the right to withdraw linking permission without notice. We may disable all or any social media features and any links at any time without notice in our discretion.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!