Documents & Data; Licensing of Intellectual Property This Agreement creates a non-exclusive and perpetual license for City to copy, use, modify, reuse, or sublicense any and all copyrights, designs, and other intellectual property embodied in plans, specifications, studies, drawings, estimates, and other documents or works of authorship fixed in any tangible medium of expression, including but not limited to, physical drawings or data magnetically, electronically or otherwise recorded or stored, which are prepared or caused to be prepared by Consultant under this Agreement (“Documents & Data”). All Documents & Data shall be and remain the property of City, and shall not be used in whole or in substantial part by Consultant on other projects without the City's express written permission. Within thirty (30) days following the completion, suspension, abandonment or termination of this Agreement, Consultant shall provide to City reproducible copies of all Documents & Data, in a form and amount required by City. City reserves the right to select the method of document reproduction and to establish where the reproduction will be accomplished. The reproduction expense shall be borne by City at the actual cost of duplication. In the event of a dispute regarding the amount of compensation to which the Consultant is entitled under the termination provisions of this Agreement, Consultant shall provide all Documents & Data to City upon payment of the undisputed amount. Consultant shall have no right to retain or fail to provide to City any such documents pending resolution of the dispute. In addition, Consultant shall retain copies of all Documents & Data on file for a minimum of five (5) years following completion of the Project, and shall make copies available to City upon the payment of actual reasonable duplication costs. In addition, before destroying the Documents & Data following this retention period, Consultant shall make a reasonable effort to notify City and provide City with the opportunity to obtain the documents.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Contractor Intellectual Property Contractor shall retain all right, title and interest in and to any work, ideas, inventions, discoveries, tools, methodology, computer programs, processes and improvements and any other intellectual property, tangible or intangible, that has been created by Contractor prior to entering into this Contract (“Contractor Intellectual Property”). Should the State require a license for the use of Contractor Intellectual Property in connection with the development or use of the items that Contractor is required to deliver to the State under this Contract, including Work Product (“Deliverables”), the Contractor shall grant the State a royalty-free license for such development and use. For the avoidance of doubt, Work Product shall not be deemed to include Contractor Intellectual Property, provided the State shall be granted an irrevocable, perpetual, non-exclusive royalty-free license to use any such Contractor Intellectual Property that is incorporated into Work Product.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply.
2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.
2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire.
2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.
2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Infringement of Intellectual Property Rights Seller (or its supplier) shall indemnify and hold Purchaser harmless against an award of damages and costs against Purchaser by a final judgment of a court of last resort in the country in which the Equipment is originally installed by Seller resulting from actual or alleged patent infringement relating in any way to use or sale of the Equipment, or any component thereof furnished hereunder, provided that Purchaser (i) gives Seller immediate notice in writing of any suit or claim for infringement against Purchaser, (ii) permits Seller (or its supplier) to control the defense of any suit or claim, and (iii) gives Seller (or its supplier) all available information, assistance, and authority to enable Seller (or its supplier) to assume such defense. Seller (or its supplier) shall diligently defend and prosecute all such patent infringement litigation and shall keep Purchaser fully informed of all developments in the defense or adjustments of any such claim or action. If a final injunction or judgment in any patent infringement action is rendered restraining Purchaser’s use of the Equipment, or of any component thereof, Seller shall, at its option and expense, either (i) procure for Purchaser the right to use the Equipment, or (ii) replace or modify the infringing component so that it no longer infringes, or (iii) repurchase the Equipment upon its return to Seller, less reasonable depreciation of 2% per month from date of installation, for use, damage, or obsolescence. Seller shall have no liability whatsoever to Purchaser if any such patent infringement or claim thereof is based upon or arises from (i) the use of any Equipment in combination with an apparatus or device not manufactured or supplied by Seller and such combination cause the infringement, (ii) the use of any Equipment in a manner for which it was neither designed nor contemplated, or (iii) any modification of any Equipment by Purchaser, or by Seller at Purchaser’s request, or by any third party, which causes the Equipment to become infringing.
Antivirus software All workstations, laptops and other systems that process and/or store PHI COUNTY discloses to CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY must have installed and actively use comprehensive anti-virus software solution with automatic updates scheduled at least daily.
Licensed Intellectual Property Section 3.17(h)(vi)...................................29
SOFTWARE PIRACY PROHIBITION State or other public funds payable under this Contract shall not be used for the acquisition, operation, or maintenance of computer software in violation of federal copyright laws or applicable licensing restrictions. Contractor hereby certifies and warrants that, during the term of this Contract and any extensions, Contractor has and shall maintain in place appropriate systems and controls to prevent such improper use of public funds. If the State determines that Contractor is in violation of this provision, the State may exercise any remedy available at law or in equity or under this Contract, including, without limitation, immediate termination of this Contract and any remedy consistent with federal copyright laws or applicable licensing restrictions.
Intellectual Property Rights Infringement HP will defend and/or settle any claims against Customer that allege that an HP-branded product or service as supplied under this Agreement infringes the intellectual property rights of a third party. HP will rely on Customer’s prompt notification of the claim and cooperation with our defense. HP may modify the product or service so as to be non-infringing and materially equivalent, or we may procure a license. If these options are not available, we will refund to Customer the amount paid for the affected product in the first year or the depreciated value thereafter or, for support services, the balance of any pre-paid amount or, for professional services, the amount paid. HP is not responsible for claims resulting from any unauthorized use of the products or services.
COMMERCIAL COMPUTER SOFTWARE If performance involves acquisition of existing computer software, the following Company Exhibit is incorporated by reference: CCS Commercial Computer Software License (Company – July 2010).
