Common use of Prototype Clause in Contracts

Prototype. 13.4.1 The Operator shall, no later than the 90 (ninety) days from the Appointed Date, provide to the Authority 5 (five) copies of the Designs and Drawings of the Prototypes, as specified in Schedule-F. Provided that the Operator may, share only the details of the layout of the Prototype and not share any propriety information forming part of Designs and Drawings of the Prototype. 13.4.2 The Authority shall depute a team for undertaking a review of the Designs and Drawings and for submitting a report (the “Design Report”) to the Authority within 15 days from the date of receiving the Designs and Drawings. For the avoidance of doubt, it is agreed that the review and comments hereunder shall be limited to ensuring compliance with the terms of this Agreement. It is further agreed that any failure or omission of the Authority to review and/ or comment hereunder shall not be construed or deemed as acceptance of any such Designs and Drawings by the Authority. 13.4.3 The Authority shall depute a team for inspection of the Proto Vehicle at various stages i.e. chassis preparation i.e.stage-1, structure stage, paneling stage, painting stage and final stage, and in pursuance of the inspection the Operator shall carry out such modifications as suggested in the fabrication of Proto Vehicle. 13.4.4 Pursuant to the Design Report or otherwise, the Operator shall carry out such modifications in the designs as may be necessary for conforming to the Specifications and Standards. 13.4.5 The Authority expressly agrees that it shall, subject to the provisions of this Agreement and Applicable Laws, maintain the confidentiality of Designs and Drawings provided to it by the Operator and shall endeavor to protect the Intellectual Property rights of the Operator, if any, therein.

Prototype. 13.4.1 The Operator shall, no later than the 90 (ninety) days from the Appointed Date, provide to the Authority [5 (five) )] copies of the Designs and Drawings of the Prototypes, as specified in Schedule-F. Provided that the Operator may, share only the details of the layout of the Prototype and not share any propriety information forming part of Designs and Drawings of the Prototype. 13.4.2 The Authority shall depute a team of experts for undertaking a review of the Designs and Drawings and for submitting a report (the “Design Report”) to the Authority within [15 days (fifteen) days] from the date of receiving the Designs and Drawings. For the avoidance of doubt, it is agreed that the review and comments hereunder shall be limited to ensuring compliance with the terms of this Agreement. It is further agreed that any failure or omission of the Authority to review and/ or comment hereunder shall not be construed or deemed as acceptance of any such Designs and Drawings by the Authority. 13.4.3 The Authority shall depute a team for inspection of the Proto Vehicle at various stages i.e. chassis preparation i.e.stage-1, structure stage, paneling stage, painting stage and final stage, and in pursuance of the inspection the Operator shall carry out such modifications as suggested in the fabrication of Proto Vehicle. 13.4.4 Pursuant to the Design Report or otherwise, the Operator shall carry out such modifications in the designs Designs as may be necessary for conforming to with the Specifications and Standards. 13.4.5 13.4.4 The Authority expressly agrees that it shall, subject to the provisions of this Agreement and Applicable Laws, maintain the confidentiality of Designs and Drawings provided to it by the Operator and shall endeavor endeavour to protect the Intellectual Property rights of the Operator, if any, therein.

Prototype. 13.4.1 The Operator shall, no later than the 90 (ninety) days from the Appointed Date, provide to the Authority [5 (five) )] copies of the Designs and Drawings of the Prototypes, as specified in Schedule-F. Provided that the Operator may, share only the details of the layout of the Prototype and not share any propriety information forming part of Designs and Drawings of the Prototype. 13.4.2 The Authority shall depute a team of experts for undertaking a review of the Designs and Drawings and for submitting a report (the “Design Report”) to the Authority within [15 days (fifteen) days] from the date of receiving the Designs and Drawings. For the avoidance of doubt, it is agreed that the review and comments hereunder shall be limited to ensuring compliance with the terms of this Agreement. It is further agreed that any failure or omission of the Authority to review and/ or comment hereunder shall not be construed or deemed as acceptance of any such Designs and Drawings by the Authority. 13.4.3 The Authority shall depute a team for inspection of the Proto Vehicle at various stages i.e. chassis preparation i.e.stage-1, structure stage, paneling stage, painting stage and final stage, and in pursuance of the inspection the Operator shall carry out such modifications as suggested in the fabrication of Proto Vehicle. 13.4.4 Pursuant to the Design Report or otherwise, the Operator shall carry out such modifications in the designs as may be necessary for conforming to with the Specifications and Standards. 13.4.5 13.4.4 The Authority expressly agrees that it shall, subject to the provisions of this Agreement and Applicable Laws, maintain the confidentiality of Designs and Drawings provided to it by the Operator and shall endeavor endeavour to protect the Intellectual Property rights of the Operator, if any, therein.

Prototype. 13.4.1 The Operator shall, no later than the 90 3 (ninetyThree) days weeks from the Appointed DateLOA, provide to the Authority 5 (five) copies of the Designs and Drawings of the Prototypes, as specified in Schedule-F. Provided that the Operator may, share only the details of the layout of the Prototype and not share any propriety information forming part of Designs and Drawings of the Prototype. 13.4.2 The Authority shall depute a team for undertaking a review of the Designs and Drawings and for submitting a report (the “Design Report”) to the Authority within 15 days from the date of receiving the Designs and Drawings. For the avoidance of doubt, it is agreed that the review and comments hereunder shall be limited to ensuring compliance with the terms of this Agreement. It is further agreed that any failure or omission of the Authority to review and/ or comment hereunder shall not be construed or deemed as acceptance of any such Designs and Drawings by the Authority. 13.4.3 The Authority shall depute a team for inspection of the Proto Vehicle at various stages i.e. i.e., chassis preparation i.e.stage-1i.e., stage-1, structure stage, paneling stage, painting stage and final stage, and in pursuance of the inspection the Operator shall carry out such modifications as suggested in the fabrication of Proto Vehicle. 13.4.4 Pursuant to the Design Report or otherwise, the Operator shall carry out such modifications in the designs as may be necessary for conforming to the Specifications and Standards. 13.4.5 The Authority expressly agrees that it shall, subject to the provisions of this Agreement and Applicable Laws, maintain the confidentiality of Designs and Drawings provided to it by the Operator and shall endeavor to protect the Intellectual Property rights of the Operator, if any, therein.

Prototype. 13.4.1 The Operator shall, no later than the 90 within 30 (ninetythirty) days from the Appointed Datedate of signing of this agreement, provide to the Authority (or any nominee appointed by it for this purpose) 5 (five) copies of the Designs and Drawings (along with soft copies) of a sample Bus that conforms to the PrototypesSpecifications and Standards (the “Prototype”), as specified in Schedule-F. Provided that the Operator may, share only the details of the layout of the Prototype and not share any propriety information forming part of Designs and Drawings of the Prototype. 13.4.2 The Authority, or any independent third party agency appointed by the Authority for this purpose, shall depute a team of experts for undertaking a review of the Designs and Drawings to ensure compliance with the requirements of this Agreement. Based on the review, the Authority (or its nominee) shall prepare and for submitting submit a report (the “Design Report”) highlighting therein, amongst other aspects, any specific non-compliances in the Designs and Drawings with the requirements of this Agreement. The Authority (or its nominee) shall submit a copy of the Design Report to the Authority Operator within 15 (fifteen) days from the date of receiving the Designs and Drawings. For Drawings of the avoidance of doubt, it is agreed that Prototype from the review and comments hereunder shall be limited to ensuring compliance with the terms of this AgreementOperator. It is further agreed that any failure or omission of the Authority Authority, or its nominee, to review and/ or comment hereunder on the Designs and Drawings or to highlight any deficiency therein shall not be construed or deemed as acceptance of any such Designs and Drawings by the Authority, or its nominee (if any) and, notwithstanding anything to the contrary, the Operator acknowledges and agrees that it is the sole responsibility of the Operator to ensure that the Designs and Drawings are fully in compliance with the requirements of this Agreement. Authority & Operator may conduct consultations with relevant stakeholders interalia, passengers representing PwDs, elderly, women, youth and their views /inputs may be addressed in the Design Report. 13.4.3 The Authority shall depute a team for inspection of the Proto Vehicle at various stages i.e. chassis preparation i.e.stage-1, structure stage, paneling stage, painting stage and final stage, and in pursuance of the inspection the Operator shall carry out such modifications as suggested in the fabrication of Proto Vehicle. 13.4.4 Pursuant to the Design Report or otherwise, the Operator shall carry out such modifications in the designs Designs and Drawings as may be necessary in order for conforming the Prototype to conform to the requirements of this Agreement, including without limitation, the Specifications and Standards. 13.4.5 . The Authority expressly agrees that it (and any nominee of the Authority) shall, subject to the provisions of this Agreement and Applicable Laws, maintain the confidentiality of any Designs and Drawings provided to it them by the Operator and shall endeavor endeavour to protect the Intellectual Property rights of the Operator, if any, therein.

Prototype. 13.4.1 The Operator shall, no later than the 90 within 30 (ninetythirty) days from the Appointed Datedate of issuance of LOA, provide to the Authority (or any nominee appointed by it for this purpose) 5 (five) copies of the Designs and Drawings (along with soft copies) of a sample Bus that conforms to the PrototypesSpecifications and Standards (the “Prototype”), as specified in Schedule-F. Provided that the Operator may, share only the details of the layout of the Prototype and not share any propriety information forming part of Designs and Drawings of the Prototype. 13.4.2 The Authority, or any independent third party agency appointed by the Authority for this purpose, shall depute a team of experts for undertaking a review of the Designs and Drawings to ensure compliance with the requirements of this Agreement. Based on the review, the Authority (or its nominee) shall prepare and for submitting submit a report (the “Design Report”) highlighting therein, amongst other aspects, any specific non-compliances in the Designs and Drawings with the requirements of this Agreement. The Authority (or its nominee) shall submit a copy of the Design Report to the Authority Operator within 15 (fifteen) days from the date of receiving the Designs and Drawings. For Drawings of the avoidance of doubt, it is agreed that Prototype from the review and comments hereunder shall be limited to ensuring compliance with the terms of this AgreementOperator. It is further agreed that any failure or omission of the Authority Authority, or its nominee, to review and/ or comment hereunder on the Designs and Drawings or to highlight any deficiency therein shall not be construed or deemed as acceptance of any such Designs and Drawings by the Authority, or its nominee (if any) and, notwithstanding anything to the contrary, the Operator acknowledges and agrees that it is the sole responsibility of the Operator to ensure that the Designs and Drawings are fully in compliance with the requirements of this Agreement. Authority & Operator may conduct consultations with relevant stakeholders interalia, passengers representing PwDs, elderly, women, youth and their views /inputs may be addressed in the Design Report. 13.4.3 The Authority shall depute a team for inspection of the Proto Vehicle at various stages i.e. chassis preparation i.e.stage-1, structure stage, paneling stage, painting stage and final stage, and in pursuance of the inspection the Operator shall carry out such modifications as suggested in the fabrication of Proto Vehicle. 13.4.4 Pursuant to the Design Report or otherwise, the Operator shall carry out such modifications in the designs Designs and Drawings as may be necessary in order for conforming the Prototype to conform to the requirements of this Agreement, including without limitation, the Specifications and Standards. 13.4.5 . The Authority expressly agrees that it (and any nominee of the Authority) shall, subject to the provisions of this Agreement and Applicable Laws, maintain the confidentiality of any Designs and Drawings provided to it them by the Operator and shall endeavor endeavour to protect the Intellectual Property rights of the Operator, if any, therein.