PSW Object Library Sample Clauses

Open Split View

Download

Share

Cite

PSW Object Library. The combination of the PSW Systems Library and the PSW Business Library.

Sample 1Sample 2Sample 3

Save

Copy

Related to PSW Object Library

• Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

• Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

• Product Testing No later than [**] prior to a scheduled Delivery ARIAD US shall send to ARIAD SWISSCO the Delivery Documents for review. Following such review, unless within [**] of receipt of the Delivery Documents ARIAD SWISSCO gives written notice of rejection of the Product to be delivered, stating the reasons for such rejection, the Delivery shall proceed, and both Parties shall organize the same. Upon arrival at ARIAD SWISSCO nominated site it shall visually inspect the shipment of the Product to identify any damage to the external packaging. ARIAD SWISSCO may reject any shipment (or portion thereof) of the Product that is damaged by providing to ARIAD US reasonable evidence of damage within [**] after Delivery of such Product. If ARIAD SWISSCO does not so reject any shipment (or portion thereof) of the Product within [**] of Delivery of such Product, ARIAD SWISSCO shall be deemed to have accepted such shipment of the Product; provided, however, that in the case of the Product having any Latent Defect, ARIAD SWISSCO shall notify ARIAD US promptly once it becomes aware that a Product contains a Latent Defect and subsequently may reject such Product by giving written notice to ARIAD US of ARIAD SWISSCO’s rejection of such Product and shipping a representative sample of such Product or other evidence of Non-Conformance to ARIAD US within [**] after becoming aware of such Latent Defect, which notice shall include a description of the Latent Defect.

• Human Leukocyte Antigen Testing This plan covers human leukocyte antigen testing for A, B, and DR antigens once per member per lifetime to establish a member’s bone marrow transplantation donor suitability in accordance with R.I. General Law §27-20-36. The testing must be performed in a facility that is: • accredited by the American Association of Blood Banks or its successors; and • licensed under the Clinical Laboratory Improvement Act as it may be amended from time to time. At the time of testing, the person being tested must complete and sign an informed consent form that also authorizes the results of the test to be used for participation in the National Marrow Donor program.

• RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

• Extra Trips a. Bus Drivers may be absent from driving part and/or all of their regular bus routes to take an extra trip. This will include Kindergarten route, shuttles, and noon Xxxxx Drivers. For Pay purposes the extra trip begins at the end of the driver's regular route. b. Regular Drivers desiring to take trips shall sign up at first Bus Drivers' Meeting held either prior to or on the opening day of school. Any Driver may join or remove themselves from the list at any time. All extra trips (Educational and Athletic/Group) shall be posted on one (1) list. c. Eligible Drivers shall be offered trips at a monthly field trip meeting on a seniority rotating basis. Between monthly meetings, trips shall be offered by phone or radio, on a seniority basis. d. If a Driver cancels a trip they agreed to drive, the trip will be offered to the next driver (who does not have a trip assigned) on a seniority basis from the canceled trip list. e. Drivers may not exchange trips. f. Drivers taking a group trip which involves an admission price and/or parking fee shall be covered by the group sponsoring the trip. g. In the event none of the eligible Drivers on the seniority rotation list are available to take a trip, the Drivers on the as-needed list will be asked. If no regular Drivers are available, then a Sub will be asked. If no Regular or Sub Drivers can take a trip, the Transportation Supervisor will appoint a Driver, starting with the least senior Driver on the DO WANT trips list. h. The Board may use the radio to contact Drivers for trips. Drivers must make the decision to drive or not to drive the offered trip within two (2) hours. i. If at all possible, the trips will be scheduled around two (2) weeks in advance. j. If a Driver shows up for a trip, and has not been notified the trip has been canceled, or a coach/advisor transports students, the Driver will be paid for two (2) regular hours and the driver will not be charged for the trip. k. If a Driver's trip date is changed, the scheduled Driver will stay on the trip. If the trip is canceled completely, the driver will be inserted next up the seniority rotation. The inserted driver shall not be taken out of rotation for forthcoming trips. l. If an Athletic Trip is canceled mid-event, the driver will be paid for the actual number of hours on duty; if rescheduled, the rescheduled event will be a new trip on the rotation list and the driver will be paid for the actual number of hours on duty. m. If a driver is on the insert list and already has a trip on the same day as a newly offered trip, the driver will stay on the insert list until a trip is offered for a day the driver is not already schedule to drive an extra trip. n. Any driver who cancels an extra trip two (2) or more times in a given month shall be skipped in the next rotation. o. Pay for extra trips will begin after the driver’s regular route time and will be at the driver’s regular rate of pay for up to two and one-half (2.5) hours for driver time and pre-trip. The remaining portion of the route will be at the Step 0 base rate. p. Overnight trips shall be considered special trips with reimbursement determined on an individual basis. q. Drivers on Leaves of Absences are not eligible for extra trips. r. Drivers are not eligible for extra trips on days on which they have called in and are off.

• SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.

• Posting licensed content on any Website The following terms and conditions apply as follows: Licensing material from an Elsevier journal: All content posted to the web site must maintain the copyright information line on the bottom of each image; A hyper-text must be included to the Homepage of the journal from which you are licensing at xxxx://xxx.xxxxxxxxxxxxx.xxx/science/journal/xxxxx or the Elsevier homepage for books at xxxx://xxx.xxxxxxxx.xxx; Central Storage: This license does not include permission for a scanned version of the material to be stored in a central repository such as that provided by Heron/XanEdu. Licensing material from an Elsevier book: A hyper-text link must be included to the Elsevier homepage at xxxx://xxx.xxxxxxxx.xxx . All content posted to the web site must maintain the copyright information line on the bottom of each image.

• Meter Testing Company shall provide at least twenty-four (24) hours' notice to Seller prior to any test it may perform on the revenue meters or metering equipment. Seller shall have the right to have a representative present during each such test. Seller may request, and Company shall perform, if requested, tests in addition to the every fifth-year test and Seller shall pay the cost of such tests. Company may, in its sole discretion, perform tests in addition to the fifth year test and Company shall pay the cost of such tests. If any of the revenue meters or metering equipment is found to be inaccurate at any time, as determined by testing in accordance with this Section 10.2 (Meter Testing), Company shall promptly cause such equipment to be made accurate, and the period of inaccuracy, as well as an estimate for correct meter readings, shall be determined in accordance with Section 10.3 (Corrections).

• Voice Grade Unbundled Copper Sub-Loop Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (aka riser cable)