Resignation as L/C Issuer after Assignment Notwithstanding anything to the contrary contained herein, if at any time Bank of America assigns all of its Commitment and Loans pursuant to subsection (b) above, Bank of America may, upon 30 days’ notice to the Borrower and the Lenders, resign as L/C Issuer. In the event of any such resignation as L/C Issuer, the Borrower shall be entitled to appoint from among the Lenders a successor L/C Issuer hereunder; provided, however, that no failure by the Borrower to appoint any such successor shall affect the resignation of Bank of America as L/C Issuer. If Bank of America resigns as L/C Issuer, it shall retain all the rights, powers, privileges and duties of the L/C Issuer hereunder with respect to all Letters of Credit outstanding as of the effective date of its resignation as L/C Issuer and all L/C Obligations with respect thereto (including the right to require the Lenders to make Base Rate Loans or fund risk participations in Unreimbursed Amounts pursuant to Section 2.03(c)). Upon the appointment of a successor L/C Issuer, (a) such successor shall succeed to and become vested with all of the rights, powers, privileges and duties of the retiring L/C Issuer, and (b) the successor L/C Issuer shall issue letters of credit in substitution for the Letters of Credit, if any, outstanding at the time of such succession or make other arrangements satisfactory to Bank of America to effectively assume the obligations of Bank of America with respect to such Letters of Credit.
Advances Payments Non Funding Lenders Information Actions in Concert (a) Advances; Payments
(i) Revolving Lenders shall refund or participate in the Swing Line Loan in accordance with clauses (iii) and (iv) of Section 1.l(b). If the Swing Line Lender declines to make a Swing Line Loan or if Swing Line Availability is zero, Agent shall notify Revolving Lenders, promptly after receipt of a Notice of Revolving Credit Advance and in any event prior to noon (New York time) on the date such Notice of Revolving Credit Advance is received, by telecopy, telephone or other similar form of transmission. Each Revolving Lender shall make the amount of such Lender’s Pro Rata Share of each Revolving Credit Advance available to Agent in same day funds by wire transfer to Agent’s account as set forth in Annex H not later than 3:00 p.m. (New York time) on the requested funding date, in the case of an Index Rate Loan, and not later than 3:00 p.m. (New York time) on the requested funding date in the case of a LIBOR Loan. After receipt of such wire transfers (or, in the Agent’s sole discretion, before receipt of such wire transfers), subject to the terms hereof, Agent shall make the requested Revolving Credit Advance to the Borrower designated by Borrower Representative in the Notice of Revolving Credit Advance. All payments by each Revolving Lender shall be made without setoff, counterclaim or deduction of any kind.
(ii) On the 2nd Business Day of each calendar week or more frequently at Agent’s election (each, a “Settlement Date”), Agent shall advise each Lender by telephone or telecopy of the amount of such Lender’s Pro Rata Share of principal, interest and Fees paid for the benefit of Lenders with respect to each applicable Loan. Provided that each Lender has funded all payments or Advances required to be made by it and purchased all participations required to be purchased by it under this Agreement and the other Loan Documents as of such Settlement Date, Agent shall pay to each Lender such Lender’s Pro Rata Share of principal, interest and Fees paid by Borrowers since the previous Settlement Date for the benefit of such Lender on the Loans held by it. To the extent that any Lender (a “Non-Funding Lender”) has failed to fund all such payments and Advances or failed to fund the purchase of all such participations, Agent shall be entitled to set off the funding short-fall against that Non-Funding Lender’s Pro Rata Share of all payments received from Borrowers. Such payments shall be made by wire transfer to such Lender’s account (as specified by such Lender in Annex H or the applicable Assignment Agreement) not later than 2:00 p.m. (New York time) on the next Business Day following each Settlement Date.
(b) Availability of Lender’s Pro Rata Share Agent may assume that each Revolving Lender will make its Pro Rata Share of each Revolving Credit Advance available to Agent on each funding date. If such Pro Rata Share is not, in fact, paid to Agent by such Revolving Lender when due, Agent will be entitled to recover such amount on demand from such Revolving Lender without setoff, counterclaim or deduction of any kind. If any Revolving Lender fails to pay the amount of its Pro Rata Share forthwith upon Agent’s demand, Agent shall promptly notify Borrower Representative and Borrowers shall immediately repay such amount to Agent. Nothing in this Section 9.9(b) or elsewhere in this Agreement or the other Loan Documents shall be deemed to require Agent to advance funds on behalf of any Revolving Lender or to relieve any Revolving Lender from its obligation to fulfill its Commitments hereunder or to prejudice any rights that Borrowers may have against any Revolving Lender as a result of any default by such Revolving Lender hereunder. To the extent that Agent advances funds to any Borrower on behalf of any Revolving Lender and is not reimbursed therefor on the same Business Day as such Advance is made, Agent shall be entitled to retain for its account all interest accrued on such Advance until reimbursed by the applicable Revolving Lender.
Resignation as L/C Issuer or Swingline Lender after Assignment Notwithstanding anything to the contrary contained herein, if at any time Bank of America assigns all of its Revolving Commitment and Revolving Loans pursuant to subsection (b) above, Bank of America may, (i) upon thirty (30) days’ notice to the Borrower and the Lenders, resign as L/C Issuer and/or (ii) upon thirty (30) days’ notice to the Borrower, resign as Swingline Lender. In the event of any such resignation as L/C Issuer or Swingline Lender, the Borrower shall be entitled to appoint from among the Lenders a successor L/C Issuer or Swingline Lender hereunder; provided, however, that no failure by the Borrower to appoint any such successor shall affect the resignation of Bank of America as L/C Issuer or Swingline Lender, as the case may be. If Bank of America resigns as L/C Issuer, it shall retain all the rights, powers, privileges and duties of the L/C Issuer hereunder with respect to all Letters of Credit outstanding as of the effective date of its resignation as L/C Issuer and all L/C Obligations with respect thereto (including the right to require the Lenders to make Base Rate Loans or fund risk participations in Unreimbursed Amounts pursuant to Section 2.03(c)). If Bank of America resigns as Swingline Lender, it shall retain all the rights of the Swingline Lender provided for hereunder with respect to Swingline Loans made by it and outstanding as of the effective date of such resignation, including the right to require the Lenders to make Base Rate Loans or fund risk participations in outstanding Swingline Loans pursuant to Section 2.04(c). Upon the appointment of a successor L/C Issuer and/or Swingline Lender, (A) such successor shall succeed to and become vested with all of the rights, powers, privileges and duties of the retiring L/C Issuer or Swingline Lender, as the case may be, and (B) the successor L/C Issuer shall issue letters of credit in substitution for the Letters of Credit, if any, outstanding at the time of such succession or make other arrangements satisfactory to Bank of America to effectively assume the obligations of Bank of America with respect to such Letters of Credit.
Reallocation of Applicable Percentages to Reduce Fronting Exposure During any period in which there is a Defaulting Lender, for purposes of computing the amount of the obligation of each non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit or Swing Line Loans pursuant to Sections 2.03 and 2.04, the “Applicable Percentage” of each non-Defaulting Lender shall be computed without giving effect to the Commitment of that Defaulting Lender; provided, that, (i) each such reallocation shall be given effect only if, at the date the applicable Lender becomes a Defaulting Lender, no Default or Event of Default exists; and (ii) the aggregate obligation of each non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit and Swing Line Loans shall not exceed the positive difference, if any, of (1) the Commitment of that non-Defaulting Lender minus (2) the aggregate Outstanding Amount of the Committed Loans of that Lender.
Reallocation of Participations to Reduce Fronting Exposure All or any part of such Defaulting Lender’s participation in L/C Obligations and Swingline Loans shall be reallocated among the Non-Defaulting Lenders in accordance with their respective Revolving Credit Commitment Percentages (calculated without regard to such Defaulting Lender’s Revolving Credit Commitment) but only to the extent that (x) the conditions set forth in Section 6.2 are satisfied at the time of such reallocation (and, unless the Borrower shall have otherwise notified the Administrative Agent at such time, the Borrower shall be deemed to have represented and warranted that such conditions are satisfied at such time), and (y) such reallocation does not cause the aggregate Revolving Credit Exposure of any Non-Defaulting Lender to exceed such Non-Defaulting Lender’s Revolving Credit Commitment. No reallocation hereunder shall constitute a waiver or release of any claim of any party hereunder against a Defaulting Lender arising from that Lender having become a Defaulting Lender, including any claim of a Non-Defaulting Lender as a result of such Non-Defaulting Lender’s increased exposure following such reallocation.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Designation of Different Lending Office If any Lender requests compensation under Section 5.01, or if the Borrower is required to pay any additional amount to any Lender or any Governmental Authority for the account of any Lender pursuant to Section 5.03, then such Lender shall use reasonable efforts to designate a different lending office for funding or booking its Loans hereunder or to assign its rights and obligations hereunder to another of its offices, branches or affiliates, if, in the judgment of such Lender, such designation or assignment (i) would eliminate or reduce amounts payable pursuant to Section 5.01 or Section 5.03, as the case may be, in the future and (ii) would not subject such Lender to any unreimbursed cost or expense and would not otherwise be disadvantageous to such Lender. The Borrower hereby agrees to pay all reasonable costs and expenses incurred by any Lender in connection with any such designation or assignment.
Sector Sub-Sector Industry Classification Level of Government Type of Obligation Description of Measure Source of Measure All sectors : : - : Central : National Treatment Senior Management and Board of Directors : National Treatment and the Senior Management and Board of Directors obligations shall not apply to any measure relating to small and medium sized domestic market enterprise2. Foreign equity is restricted to a maximum of 40% for domestic market enterprises with paid-in equity capital of less than the equivalent of USD 200,000 Note: Members of the Board of Directors or governing body of corporation or associations shall be allowed in proportion to their allowable participation or share in the capital of such enterprises. : -1987 Constitution of the Republic of the Philippines. - Foreign Investments Act of 1991 (R.A. No. 7042, as amended by R.A. No. 8179). -Presidential and Administrative Issuances. ∞ 2 The concept of a small and medium sized domestic market enterprise is an enterprise with paid in equity capital of less than the equivalent of USD 200,000.00.
Resignation as L/C Issuer or Swing Line Lender after Assignment Notwithstanding anything to the contrary contained herein, if at any time Bank of America assigns all of its Commitment and Loans pursuant to subsection (b) above, Bank of America may, (i) upon 30 days’ notice to the Borrower and the Lenders, resign as L/C Issuer and/or (ii) upon 30 days’ notice to the Borrower, resign as Swing Line Lender. In the event of any such resignation as L/C Issuer or Swing Line Lender, the Borrower shall be entitled to appoint from among the Lenders a successor L/C Issuer or Swing Line Lender hereunder; provided, however, that no failure by the Borrower to appoint any such successor shall affect the resignation of Bank of America as L/C Issuer or Swing Line Lender, as the case may be. If Bank of America resigns as L/C Issuer, it shall retain all the rights, powers, privileges and duties of the L/C Issuer hereunder with respect to all Letters of Credit outstanding as of the effective date of its resignation as L/C Issuer and all L/C Obligations with respect thereto (including the right to require the Lenders to make Base Rate Committed Loans or fund risk participations in Unreimbursed Amounts pursuant to Section 2.03(c)). If Bank of America resigns as Swing Line Lender, it shall retain all the rights of the Swing Line Lender provided for hereunder with respect to Swing Line Loans made by it and outstanding as of the effective date of such resignation, including the right to require the Lenders to make Base Rate Committed Loans or fund risk participations in outstanding Swing Line Loans pursuant to Section 2.04(c). Upon the appointment of a successor L/C Issuer and/or Swing Line Lender, (a) such successor shall succeed to and become vested with all of the rights, powers, privileges and duties of the retiring L/C Issuer or Swing Line Lender, as the case may be, and (b) the successor L/C Issuer shall issue letters of credit in substitution for the Letters of Credit, if any, outstanding at the time of such succession or make other arrangements satisfactory to Bank of America to effectively assume the obligations of Bank of America with respect to such Letters of Credit.
