Replacement Parts Replacement parts for goods purchased by Buyer are for the purpose of this Section defined as “Parts” (and are also considered “goods” under this Order). Unless specified otherwise by Buyer in writing, Supplier shall provide Parts (or upon Buyer’s written consent, an alternative replacement part that provides the same form, fit and function as the Part(s)) for a period of twenty (20) years after production of the goods (into which the applicable Parts are incorporated) ceases. Supplier shall continue to supply such Parts past the twenty (20) year period if Buyer orders at least twenty (20) Parts per year during such twenty-year period. The prices for any Parts purchased in the first two (2) years of the twenty-year period shall not exceed those prices in effect at the time production of the goods ceases, and no set up charges shall be permitted by Supplier or paid by Xxxxx during this two-year period. Thereafter, the prices for Parts shall be negotiated based on Supplier’s actual cost of production of such Parts plus any special packaging costs. No minimum order requirements shall apply unless the parties mutually agree in advance. After the end of the twenty-year period, Supplier shall continue to maintain in good working condition all Supplier-owned tooling required to produce the Parts and shall not dispose of such tooling without offering Buyer the right of first refusal to purchase such tooling.
Replacement of Key Personnel The Engineer must notify the State in writing as soon as possible, but no later than three business days after a project manager or other key personnel is removed from association with this contract, giving the reason for removal.
NO HARDSTOP/PASSIVE LICENSE MONITORING Unless an Authorized User is otherwise specifically advised to the contrary in writing at the time of order and prior to purchase, Contractor hereby warrants and represents that the Product and all Upgrades do not and will not contain any computer code that would disable the Product or Upgrades or impair in any way its operation based on the elapsing of a period of time, exceeding an authorized number of copies, advancement to a particular date or other numeral, or other similar self-destruct mechanisms (sometimes referred to as “time bombs,” “time locks,” or “drop dead” devices) or that would permit Contractor to access the Product to cause such disablement or impairment (sometimes referred to as a “trap door” device). Contractor agrees that in the event of a breach or alleged breach of this provision that Authorized User shall not have an adequate remedy at law, including monetary damages, and that Authorized User shall consequently be entitled to seek a temporary restraining order, injunction, or other form of equitable relief against the continuance of such breach, in addition to any and all remedies to which Authorized User shall be entitled.
Replacement Parts Warranty If during the regular or extended warranty period’s faults develop, the Contractor shall promptly repair or, upon demand, replace the defective unit or component part affected. All costs for labor and material and transportation incurred to repair or replace defective Product during the warranty period shall be borne solely by the Contractor, and the State or Authorized User shall in no event be liable or responsible therefor. Any part of component replaced by the Contractor under the Contract warranty shall be replaced at no cost to the Authorized User and guaranteed for the greater of: a) the warranty period under paragraph (d) above; or b) if a separate warranty for that part or component is generally offered by the manufacturer, the standard commercial warranty period offered by the manufacturer for the individual part or component.
Additional Federally Required Orders/Directives Both parties shall comply with the following laws and directives, where applicable:
Tool Replacement Personal tools worn out and/or broken on the job will be replaced on a like- for-like basis by the Employer, provided the tool is turned in to the Employer and the Employer had knowledge the tool was being used on the job. If an employee has his/her tools stolen from a state vehicle, the Employer will replace those tools, as long as no employee negligence has occurred.
Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract.
State Approval of Replacement Personnel The Engineer may not replace the project manager or key personnel without prior consent of the State. The State must be satisfied that the new project manager or other key personnel is qualified to provide the authorized services. If the State determines that the new project manager or key personnel is not acceptable, the Engineer may not use that person in that capacity and shall replace him or her with one satisfactory to the State within forty-five (45) days.
Replacement Basic Cardmember About using your card You must tell us if the Basic Cardmember is no longer an employee or officer of the Company or does not want to be the Basic Cardmember. In that case, you must either close the Account, or propose another person to replace the Basic Cardmember. If you propose another person to replace the Basic Cardmember, that person must agree to assume the obligations and liabilities of the Basic Cardmember under this Agreement, as of the date that such person replaces the Basic Cardmember. That person is subject to our approval. You agree that the Basic Cardmember remains the Basic Cardmember until we approve a replacement or the Account is closed. Using the card Cards may be used for purchases. At our discretion, we may permit you to make cash advances, balance transfers or person-to-person transactions subject to Limits on person-to-person transactions. You cannot transfer balances from any other account issued by us and/or our affiliates. Each Cardmember acknowledges and agrees that cards are intended to be used for the Company's commercial or business purposes. You may arrange for certain merchants and third parties to store your card number and expiration date, so that, for example: ● the merchant may charge your account at regular intervals; or ● you may make charges using that stored card information. We may (but are not required to) tell these merchants and third parties if your expiration date or card number changes or if your account status is updated, including if your account is cancelled. If you do not want us to share your updated account information, please contact us using the number on the back of your card. Keep the cards safe. Do not let anyone use them. If a card is lost or stolen or the Account is being used without permission, contact us right away. The Account may not be used for illegal activities. Limits on person-to-person transactions Your person-to-person transactions may not exceed the $2,000 person-to-person transaction limit within any 30-day period. You agree to manage your Account so that the total of your person-to-person transactions in any 30-day period do not exceed the limit on person-to-person transactions. We may not approve a person-to-person transaction if it would cause your Account to exceed the person-to- person transaction limit or your Credit Limit. Promise to pay You promise to pay all charges, including: ● charges you make, even if you do not present your card or sign for the transaction, ● charges that other people make, whether or not you or an Additional Cardmember intend to let them use the Account, subject to applicable law, and if you let them use your Account, and ● charges that Additional Cardmembers make or permit others to make. Credit limit and cash advance limit We assign a Credit Limit to the Account. We may make part of the Credit Limit available for cash advances (Cash Advance Limit). There may also be a limit on the amount you can withdraw from ATMs in a given period. The Credit Limit and Cash Advance Limit are shown on page 1 of Part 1 and on each billing statement. We may increase or reduce the Credit Limit and Cash Advance Limit. We may do so even if you pay on time and the Account is not in default. You agree to manage the Account so that: ● the Account balance (including fees and interest) is not more than the Credit Limit, and ● the cash advance balance (including fees and interest) is not more than the Cash Advance Limit. We may approve charges that cause the Account balance to go over the Credit Limit. If we do this, we will not charge an overlimit fee. If we ask you to promptly pay the amount of the Account balance above the Credit Limit, you agree to do so. Declined transactions We may decline to authorize a charge. Reasons we may do this include suspected fraud and our assessment of your creditworthiness. This may occur even if the charge would not cause you to go over your Credit Limit and your Account is not in default. We are not responsible for any losses you or any Additional Cardmembers incur if we do not authorize a charge. And we are not responsible if any merchant refuses to accept the card. About your payments When you must pay You must pay at least the Minimum Payment Due by the Payment Due Date. The Minimum Payment Due and Payment Due Date are shown on each billing statement. Each statement also states the time and manner by which you must make your payment for it to be credited as of the same day it is received. For your payment to be considered on time, we must receive at least the Minimum Payment Due in such time and How to make payments Make payments to us in U.S. dollars with: ● a single check drawn on a U.S. bank, or ● a single negotiable instrument clearable through the U.S. banking system, for example a money order, or ● an electronic payment that can be cleared through the U.S. banking system. When making a payment by mail: ● make a separate payment for each Account, ● mail your payment to the address shown on the payment coupon on the billing statement, and ● write the Account number on your check or negotiable instrument and include the payment coupon. If your payment meets the above requirements, we will credit it to the Account as of the day we receive it, as long as we receive it by the time disclosed in the manner by the Payment Due Date shown on your billing statement. Each statement also shows a Closing Date. The Closing Date is the last day of the billing period covered by the statement. Each Closing Date is about 30 days after the previous statement's Closing Date. billing statement. If we receive it after that time, we will credit the payment on the day after we receive it. If your payment does not meet the above requirements, there may be a delay in crediting the Account. This may result in late fees and additional interest charges (see How Rates and Fees Work on page 2 of Part 1). We will not accept a payment made in a foreign currency or a payment drawn on an account at a bank located outside of the U.S. If we process a late payment, a partial payment, or a payment marked with any restrictive language, that will have no effect on our rights and will not change this Agreement. How we apply payments and credits Your Account may have balances with different interest rates. For example, purchases may have a lower interest rate than cash advances. If your Account has balances with different interest rates, here is how we generally apply payments in a billing period: ● We apply your payments, up to the Minimum Payment Due, first to the balance with the lowest interest rate, and then to balances with higher interest rates. ● After the Minimum Payment Due has been paid, we apply your payments to the balance with the highest interest rate, and then to balances with lower interest rates. In most cases, we apply a credit to the same balance as the related charge. For example, we apply a credit for a purchase to the purchase balance. We may apply payments and credits within balances, and among balances with the same interest rate, in any order we choose. About your Minimum Payment Due
Condition Precedent: Requirement for Parent Company Guarantee It shall be a condition of this Framework Agreement that, if required by the Authority, the Contractor shall deliver a validly executed parent company guarantee in the form set out in Schedule 6 to this Framework Agreement. The rights and obligations of the Parties shall have no force or effect unless the parent company guarantee has been properly executed and delivered to the Authority. The parties acknowledge that if this condition has not been fulfilled any performance of this Framework Agreement by the Contractor shall be at the risk of the Contractor and the Authority shall not be liable for and the Contractor irrevocably waives any entitlement to payment of any fees, expenses or other payments in relation to such performance. Where the Contractor has failed to fulfil this condition within 14 days of the date of last subscription of the Framework Agreement the Authority shall have the right to terminate the Framework Agreement by notice in writing to the Contractor.
