Responsibilities of Ucsf
Responsibilities of Ucsf Sample Clauses
Related to Responsibilities of Ucsf
RESPONSIBILITIES OF CITY City or its representative shall issue all communications to Contractor. City has the authority to request changes in the work in accordance with the terms of this Agreement and with the terms in Exhibit A – Scope of Work. City has the authority to stop work or to suspend any work.
Responsibilities of Client a. Client shall exclusively retain the services of Consultant to perform the Scope of Work, in accordance with, and subject to, the other provisions of this Agreement. b. Client shall provide access for Consultant and its subcontractors to the Site, and shall enter into access agreements with other third party property owners, as necessary for Consultant to complete the performance of the Scope of Work. c. Client shall, as necessary to complete the Scope of Work: (i) cooperate and assist Consultant with the preparation and submittal, to PADEP, PAUSTIF, local governing authorities and others, of all information and documents including, without limitation, correspondence, notices, reports, data submittals, restrictive covenants, engineering and institutional controls, and the like; and (ii) implement and maintain any engineering or institutional controls. d. Client shall transmit to Consultant copies of all documentation, correspondence, reports, and the like, sent or received by Client, regarding the Scope of Work at the Site. e. Client shall make a good faith effort to minimize any and all interference with the progress of the Scope of Work if the Site is remodeled or otherwise modified. Client shall also make a good faith effort to place this condition on third parties that are not a party to this Agreement including, but not limited to, current owners, future owners, current operators, future operators, current lessees and future lessees.
Responsibilities of Contractor A. The Contractor shall perform all work on the described project as required by the Contract documents. The work to be performed includes the labor and services necessary to produce such replacement, and all materials, supplies, tools, transportation, equipment, and machinery required for replacement. B. This project bid includes all materials, labor and equipment to complete the reconstruction and resurfacing of streets as outlined in the Project Manual for WWREYN - XXXXXXXX SANITARY SEWER - PHASE 1 dated March 25th, 2021 as outlined in Attachment A.
RESPONSIBILITIES OF PARTIES A. BST will include billing number information associated with resold exchange lines or SPNP arrangements in its LIDB. The Local Exchange Company will request any toll billing exceptions via the Local Service Request (LSR) form used to order resold exchange lines, or the SPNP service request form used to order SPNP arrangements. B. Under normal operating conditions, BST shall include the billing number information in its LIDB upon completion of the service order establishing either the resold local exchange service or the SPNP arrangement, provided that BST shall not be held responsible for any delay or failure in performance to the extent such delay or failure is caused by circumstances or conditions beyond BST’s reasonable control. BST will store in its LIDB an unlimited volume of the working telephone numbers associated with either the resold local exchange lines or the SPNP arrangements. For resold local exchange lines or for SPNP arrangements, BST will issue line-based calling cards only in the name of Local Exchange Company. BST will not issue line- based calling cards in the name of Local Exchange Company’s individual end users. In the event that Local Exchange Company wants to include calling card numbers assigned by the Local Exchange Company in the BST LIDB, a separate agreement is required. C. BST will provide responses to on-line, call-by-call queries to the stored information for the specific purposes listed in the next paragraph. D. BST is authorized to use the billing number information to perform the following functions for authorized users on an on-line basis: 1. Validate a 14 digit Calling Card number where the first 10 digits are a line number or special billing number assigned by BST, and where the last four digits (PIN) are a security code assigned by BST. 2. Determine whether the Local Exchange Company has identified the billing number as one which should not be billed for collect or third number calls, or both.
Responsibilities of Customer 5.1 To the extent that the Supplier requires access to the Customer Site to perform the Services, the Customer shall provide such access during Normal Business Hours and to provide a suitable work environment to enable the Supplier to perform such Services subject to the Supplier complying with such internal policies and procedures of the Customer (including those relating to security and health and safety) as may be notified to the Supplier in writing from time to time. 5.2 The Customer shall co-operate with the Supplier in all matters relating to the Services and shall appoint a Representative (“Customer Representative”), who shall have authority to commit the Customer on all matters relating to the relevant Service. 5.3 The Customer agrees and acknowledges the terms of the applicable Licence Agreements, Customer Agreement and that such terms shall form part of this Agreement. For the avoidance of doubt, in the event the applicable Licence Agreements and/or Customer Agreement is not applicable to the Services being received or delivered by the Supplier to the Customer under this Agreement, such agreements shall not apply. 5.4 Customer shall; (a) adhere to the Acceptable Use Policy; (b) be a bona fide licenced user of all Third-Party Software used in the provision of the Services; (c) co-operate with the Supplier in all matters relating to the Services as reasonably requested by the Supplier; (d) adhere to the dates scheduled for provision of Services by the Supplier to the Customer as stated in the applicable Statement of Work or otherwise agreed between the Parties in writing. In the event the Customer wishes to reschedule or cancel the dates for the provision of Services, liquidated damages (“Liquidated Damages”) will become payable from the Customer to Supplier on the following basis: (i) If dates are changed or cancelled at the Customer’s request more than 14 days before the scheduled start date no Liquidated Damages are payable. (ii) If dates are changed or cancelled between 7 days and 14 days before the scheduled start date Liquidated Damages equivalent to 50% of the Fees for the Services to be provided at that time will be payable. (iii) If dates are changed or cancelled less than 7 days before the scheduled start date Liquidated Damages equivalent to 100% of the Fees for the Services to be provided at that time will be payable. (e) inform the Supplier of all health and safety rules and regulations and any other reasonable security requirements that apply at any of the Customer’s premises; (f) in respect of any Microsoft funded services, sign and deliver the Microsoft Proof of Execution (XXX) within 7 days of the date of issue by Microsoft. In the event that the Customer does not return the XXX within the 7 days’ notice period, the Supplier may be entitled to charge the Customer the amounts directly and the Customer shall follow the payment terms in this Agreement.; (g) maintain continuous global admin access to the Customer’s relevant Microsoft (h) Where a Microsoft Cloud service is deployed / utilised within the project the Customer shall assign the Supplier to be the Digital Partner of Record for a minimum of twelve (12) months from project completion date; (i) provide appropriate hardware interface, software and access authorisation to enable remote diagnosis, should such capability be required; (j) provide all information and make available all resources as reasonably requested by Supplier in the execution of its obligations under this Agreement; (k) use all reasonable efforts to follow the reasonable instructions of Supplier support personnel with respect to the resolution of defects; (l) gather all relevant information prior to requesting assistance in respect of any defects including detailed defect description, and procedures required to replicate a problem if possible. Any additional information which may help in the diagnosis of a defect should be included such as network configuration details; (m) agree that if, in the course of performing the Services, it is reasonably necessary for the Supplier’s performance of its obligations under a Statement of Work for Supplier to access or use any equipment, software or data of the Customer (or which is in the possession of the Customer) then it shall where it is able to do so grant to Supplier a non-exclusive, royalty free, terminable licence to use the same solely for the purpose of delivering the Services only for as long as is strictly necessary to deliver such Services; and (n) provide network and user access between Customer’s and Supplier’s data centres. 5.5 To the extent that the Supplier requires access to the Customer’s Operating Environment to perform the Dedicated Support, the Customer shall use reasonable endeavours to provide such access during Normal Business Hours and to provide a suitable work environment to enable the Supplier to perform such Dedicated Support subject to the Supplier complying with such internal policies and procedures of the Customer (including those relating to security and health and safety) as may be notified to the Supplier in writing from time to time. 5.6 The Customer shall (unless otherwise specified in the Statement of Work or as otherwise set out in this Agreement): (a) use the Services only for lawful purposes and in accordance with this Agreement; (b) keep secure from third parties any passwords issued to the Customer by the Supplier; (c) install or, permit the Supplier to install, the current version of software required to provide the Dedicated Support from time to time when upgrades or fixes occur and to provide a reasonable level of assistance in implementation and testing; (d) provide notice of intention to change applicable Customer-side Equipment or Customer Operating Environment or data-feeds that will directly impact the Dedicated Support; (e) comply with all applicable laws and regulations with respect to its activities under this Agreement, including those set out in Clause 20; (f) carry out all other Customer responsibilities set out in this Agreement and the Statement of Work in a timely and efficient manner. In the event of any delays in the Customer's provision of such assistance as agreed by the Parties, the Supplier may adjust any timetable or delivery schedule set out in this Agreement as reasonably necessary; (g) use the Third-Party Software and/or Software correctly in accordance with its operating instructions; (h) notify Supplier promptly of any problems with the Third-Party Software and/or Software; and (i) use only versions of the Third-Party Software and/or Software covered by Microsoft in mainstream or extended support unless otherwise agreed in writing. 5.7 In the event that the Customer is in breach of its obligations under the Agreement (excluding payment obligations) then the Supplier shall provide written notice of such breach, specifying in detail the nature of the breach and providing thirty (30) Business Days’ notice to remedy such breach if capable of remedy. If the Customer fails to remedy such breach the Supplier shall be entitled to terminate or suspend the Services without prejudice to any pre-existing rights and obligations of either Party. The Supplier shall have no liability or responsibility should the Services fail to comply with the Statement of Work and/or Service Level Agreements as a direct result of the Customer (including without limitation any of its employees, subcontractors or any of its staff) being in breach of the Agreement. 5.8 In the event that the Customer is in breach of its payment obligations under the Agreement then the Supplier shall provide written notice of such breach, specifying in detail the nature of the breach and providing thirty (30) days notice to remedy such breach if capable of remedy. If the Customer fails to remedy such breach the Supplier shall be entitled to terminate or suspend the Services without prejudice to any pre- existing rights and obligations of either Party. The Supplier shall have no liability or responsibility should the Services fail to comply with the Statement of Work and/or Service Level Agreements as a direct result of the Customer (including without limitation any of its employees, subcontractors or any of its staff) being in breach of the Agreement.
RESPONSIBILITIES OF THE OWNER The Owner agrees to: Provide all documentation, records, and disclosures as required by law or required by the Agent to manage and operate the Property, and immediately notify the Agent if the Owner becomes aware of any change in such documentation, records or disclosures, or any matter affecting the habitability of the Property; Indemnify, defend, and hold harmless the Agent, and all persons in the Agent's firm, regardless of responsibility, from all costs, expenses suits, liabilities, damages, attorneys fees, and claims of every type, including, but not limited to, those arising out of injury or death of any person, or damage to any real or personal property of any person, including the Owner, for: Any repairs performed by the Owner or by others hired directly by the Owner; or Those relating to the management, leasing, rental, security deposit, or operation of the Property by the Agent, or any person in the Agent's company, or the performance or exercise of any of the duties, powers, or authorities granted to the Agent; This sub-section, and all rights to the Agent’s indemnification, shall be considered void if the Agent exemplifies any willful acts of gross negligence; Maintain the Property in a condition fit for human habitation as required by applicable State and local laws; Pay all interest on Tenants’ security deposits if required by applicable laws; Carry and pay for: Public and premises liability insurance in an amount of no less than one-million dollars ($1,000,000.00); and Property damage and worker’s compensation insurance adequate to protect the interests of the Owner and the Agent. The Agent shall be, and the Owner authorizes Agent to be, named as an additional insured party on the Owner’s policies; and Pay any late charges, penalties and/or interest imposed by lenders or other parties for failure to make payment only if the failure is due to insufficient funds in the Agent’s trust account available for such payment. In addition, the Owner agrees to replace any funds required if there are insufficient funds in the Agent’s trust account to cover such responsibilities of the Owner.
Responsibilities of the Parties 1.5.1 The Parties shall perform all obligations of this Agreement in accordance with all Applicable Laws and Regulations, Operating Requirements, and
Responsibilities of the Contractor The Contractor shall provide all technical and professional expertise, knowledge, management, and other resources required for accomplishing all aspects of the tasks and associated activities identified in the Scope of Work. In the event that the need arises for the Contractor to perform services beyond those stated in the Scope of Work, the Contractor and the City shall negotiate mutually agreeable terms and compensation for completing the additional services.
Responsibilities of Adviser In carrying out its obligations under this Agreement, the Adviser agrees that it will: (a) Comply with all applicable law, including but not limited to the 1940 Act and the Advisers Act, the rules and regulations of the Commission thereunder, and the conditions of any order affecting the Trust or a Fund issued thereunder; (b) Use the same skill and care in providing such services as it uses in providing services to other fiduciary accounts for which it has investment responsibilities; (c) Not make loans to any person for the purpose of purchasing or carrying Fund shares; (d) Place, or arrange for the placement of, all orders pursuant to its investment determinations for the Funds either directly with the issuer or with any broker or dealer (including any affiliated broker or dealer). In executing portfolio transactions and selecting brokers or dealers, the Adviser will use its best efforts to seek on behalf of each Fund the best overall terms available. In assessing the best overall terms available for any transaction, the Adviser shall consider all factors that it deems relevant, including the breadth of the market in the security, the price of the security, the financial condition and execution capability of the broker or dealer, and the reasonableness of the commission, if any, both for the specific transaction and on a continuing basis. In evaluating the best overall terms available, and in selecting the broker or dealer to execute a particular transaction, the Adviser may also consider whether such broker or dealer furnishes research and other information or services to the Adviser; (e) Adhere to the investment objective, strategies and policies and procedures of the Trust adopted on behalf of each Fund; and (f) Maintain a policy and practice of conducting its investment advisory services hereunder independently of the commercial banking operations of its affiliates. In making investment recommendations for a Fund, the Adviser's investment advisory personnel will not inquire or take into consideration whether the issuers (or related supporting institutions) of securities proposed for purchase or sale for the Fund's account are customers of the commercial departments of its affiliates. In dealing with commercial customers, such commercial departments will not inquire or take into consideration whether securities of those customers are held by the Fund.
Responsibilities of Both Parties 6.1 The CLEC providing the circuit between CLEC’s office and SBC-12STATE’s office shall make such circuits available for use in connection with the DA services covered herein. When the total traffic exceeds the capability of the existing circuits, additional circuits will be provided by the CLEC. 6.2 Where applicable, if additional ADAX cards and ASN Routers (with sync and token ring cards) are necessary, they will be provided by SBC-12STATE, and CLEC will reimburse SBC-12STATE for the cost, plus Engineering, Furnish and Installation.
